Bobcat M-444, M-500, M-600 Gasoline L.P. Gas Electric Diesel Operation & Maintenance Manual 6509710

Bobcat M-444, M-500, M-600 Gasoline L.P. Gas Electric Diesel Operation & Maintenance Manual 6509710

FILE DETAILS:

Bobcat M-444, M-500, M-600 Gasoline L.P. Gas Electric Diesel Operation & Maintenance Manual 6509710 – PDF DOWNLOAD

Language : English
Pages : 74
Downloadable : Yes
File Type : PDF

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Bobcat M-444, M-500, M-600 Gasoline L.P. Gas Electric Diesel Operation & Maintenance Manual 6509710 – PDF DOWNLOAD

MOUNTING AND DISMOUNTING
When mounting or dismounting your Bobcat Loader, use the two safety steps provided. One step is located on the crossmember between the boom arms. The other step is located above the control pedals.When in the seat of your Bobcat Loader, make yourself comfortable; adjust the seat and fasten your seat belt.THROTTLE CONTROL (On all machines except electric)
The throttle control is the short lever located to the right of the operator’s seat (Figure 1). Moving the throttle control forward will increase engine speed (RPM); moving it back will decrease engine RPM.The throttle control for the M-444 Bobcat is on the right steering lever.While operating your Melroe Bobcat, maintain a 3/4 to full throttle setting. Air-cooled engines must be run at high RPM for effective cooling. Less than a 3/4 throttle setting for long periods may also cause excessive carbon deposits in the engine combustion chambers. Be sure that the engine RPM at full throttle is not less than the manufacturer’s specifications.VARIABLE SPEED DRIVE CONTROL
The drive speed control is the short lever located to the left of the operator’s seat (Figure 1). Moving it forward will increase the ground speed of the Bobcat; moving it back will decrease the ground speed.While you are learning to operate your Melroe Bobcat, leave the drive speed control in low speed position. This will keep your travel speed low until you get the feel of the controls.