Bomag BW 213 DH-4 PDH-4 BVC plates Single Drum Roller Operating Manual 00804461 PDF

Bomag BW 213 DH-4 PDH-4 BVC with attachment plates Single Drum Roller Operating Instruction Manual 00804461 – PDF DOWNLOAD

FILE DETAILS:

Bomag BW 213 DH-4 PDH-4 BVC with attachment plates Single Drum Roller Operating Instruction Manual 00804461 – PDF DOWNLOAD

Language : English
Pages : 166
Downloadable : Yes
File Type : PDF
Size: 4.83 MB

DESCRIPTION:

Bomag BW 213 DH-4 PDH-4 BVC with attachment plates Single Drum Roller Operating Instruction Manual 00804461 – PDF DOWNLOAD

FOREWORD:

You should only operate the machine after you have been instructed and in compliance with these instructions.

• Strictly observe the safety regulations.
• Please observe also the guidelines of the Civil Engineering Liability Association ”Safety Rules for the Operation of Road Rollers and Soil Compactors” and all relevant accident prevention regulations.
• For your own personal safety you should only use original spare parts from BOMAG. In the course of technical development we reserve the right for technical modifications without prior notification.
• These operating andmaintenance instructions are also available in other languages. Apart from that, the spare parts catalogue is available from your BOMAG dealer against the serial number of your machine.
• Your BOMAG dealer will also supply you with information about the correct use of our machines in soil and asphalt construction. The above notes do not constitute an extension of the warranty and liability conditions specified in the general terms of business of BOMAG GmbH. We wish you successful work with your BOMAG machine.

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Bomag BW 213 DH-4 PDH-4 BVC with attachment plates Single Drum Roller Operating Instruction Manual 00804461 – PDF DOWNLOAD

Technical Data 9
Safety regulations 13
Indicators and Controls 21
3.1 General notes 24
3.2 Description of indicators and control elements 24
3.3 Display and control elements
Variocontrol 35
3.4 Description of indicating and control elements
Variocontrol 37
3.5 Line diagram Automatic (EVIB) 39
3.6 Description of line diagram Automatic (EVIB) 41
3.7 Line diagram Manual (EVIB) 43
3.8 Description of line diagram Manual (EVIB) 45
3.9 Bar diagram (EVIB) 46
Operation 47
4.1 General notes 48
4.2 Tests before taking into operation 48
4.3 Starting the engine 49
4.4 Starting with jump wires 51
4.5 Driving the machine 52
4.6 Switching the vibration on and off 54
4.7 Operating the parking brake, stopping the machine 56
4.8 Shutting the engine down 56
4.9 Changing the LCD-display 57
4.10 Emergency exit 67
4.11 Adjusting the seat 67
4.12 Operating the hood 68
4.13 Towing in case of an engine failure 69
4.14 Transport 71
4.15 Tests before starting to operate 73
4.16 Mounting the attachment plates 73
4.17 Taking the attachment plates into service 75
4.18 Detaching the attachment plates 77
4.19 Variocontrol, selecting the operating mode 79
4.20 Measuring pass with Variocontrol 81
4.21 Finishing compaction of a track 84
4.22 Printing measuring data after completing compaction 85
4.23 Teaching distance pulses 86
4.24 Amplitude limitation (BVC only) 88
4.25 Changing the paper roll in the measuring value printer 90
4.26 Changing the printer ribbon in the measuring value printer 91
Table of Contents
6 BOMAG BW 213 DH-4/PDH-4 BVC
Maintenance 93
5.1 General notes on maintenance 94
5.2 Fuels and lubricants 95
5.3 Table of fuels and lubricants 99
5.4 Running-in instructions 100
5.5 Maintenance chart 101
5.6 Check the engine oil level 104
5.7 Check, clean the water separator 104
5.8 Check the fuel level 105
5.9 Check the hydraulic oil level 106
5.10 Check the coolant level 106
5.11 Checking the dust separator on the oil bath air filter 107
5.12 Checking the tire pressure 108
5.13 Clean the cooling fins on engine and hydraulic oil cooler 108
5.14 Check the oil level in the drive axle 109
5.15 Checking the oil level in left/right wheel hubs 110
5.16 Check the oil level in the axle reduction gear 110
5.17 Check the oil level in the drum reduction gear 111
5.18 Checking the Vario exciter oil level 112
5.19 Changing engine oil and oil filter cartridges 113
5.20 Change the fuel filter cartridge 114
5.21 Draining the sludge from the fuel tank 115
5.22 Service the battery 116
5.23 Change the fuel pre-filter cartridge 117
5.24 Checking, replacing the refrigerant compressor V-belt 118
5.25 Service the air conditioning 119
5.26 Adjusting the valve clearance 122
5.27 Adjusting the control piston play 124
5.28 Checking / replacing the ribbed V-belt 125
5.29 Check the engine mounts 126
5.30 Change the oil in the drive axle 126
5.31 Changing the oil in the wheel hubs 127
5.32 Changing the oil in the axle reduction gear 128
5.33 Change the oil in the drum reduction gear 129
5.34 Vario exciter oil change 130
5.35 Change the oil in the exciter shaft housing of the attachment plates 131
5.36 Tightening the fastening of the axle to the frame 132
5.37 Tightening the wheel nuts 132
5.38 Check the ROPS 133
5.39 Cleaning the oil bath air filter 133
5.40 Changing hydraulic oil and breather filter 134
5.41 Changing the hydraulic oil filter 135
Table of Contents
BW 213 DH-4/PDH-4 BVC BOMAG 7
5.42 Changing the steering oil filter 136
5.43 Changing the attachment plate oil filter 137
5.44 Change the coolant 138
5.45 Replacing the crank case ventilation valve 140
5.46 Electronic injector test EMR 141
5.47 Service the combustion air filter 142
5.48 Adjust the scrapers 144
5.49 Adjust the parking brake 145
5.50 Change the tires 146
5.51 Change the fresh air filter in the cabin 147
5.52 Tightening torques 147
5.53 Engine conservation 148
Trouble shooting 149
6.1 General notes 150
6.2 Reading out faults BVC/BTM05 150
6.3 Engine 152
Cab assembly before initial start-up 155
7.1 Preparations 157
7.2 Cabin assembly 158
7.3 Final function tests and checks 164