Cat BUCYRUS 2810 Operation Manual BI000235 - PDF DOWNLOAD

Cat BUCYRUS 2810 Operation Manual BI000235 - PDF DOWNLOAD

FILE DETAILS:

Cat BUCYRUS 2810 Operation Manual BI000235 - PDF DOWNLOAD

Language :English
Pages :228
Downloadable : Yes
File Type : PDF

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Cat BUCYRUS 2810 Operation Manual BI000235 - PDF DOWNLOAD

SAFETY PRECAUTIONS

1. The machine should not be operated until the operator has read and
understood the operating instructions for the machine and is thoroughly familiar with the location, operation and functions of all controls.
2. An operator should not operate the machine without all covers and/or guards properly mounted and secured.
3. The operator should familiarize himself with the fire suppression system of the machine.
4. Always be sure all personnel are clear of machine before starting machine.
5. Carefully test all functions before operating the machine.
6. Always wear safety glasses not only for your own safety but for that of your fellow workers. Should an operator be temporarily blinded by dust, etc., while operating the machine, the machine becomes a hazard to both men and other equipment.
7. When operating the machine, always keep all parts of your body within the confines of the operator's pit. Hanging head, arms or legs outside the pit could result in severe injury or death.
8. Take extra caution to keep from cutting the trailing cable against the rib or under the track.
9. Any damaged, broken or malfunctioning parts should be reported at once to the section foreman.
10. A permissible electrical enclosure should never be opened by anyone except properly trained maintenance personnel.
11. The operator should never try to troubleshoot the cause of a circuit breaker trip, whether the breaker is on the machine or at the power center. Notify proper maintenance personnel to determine the cause and correct.
12. Never work under a raised cutter boom, conveyor boom or gathering head unless they are properly supported.

TABLE OF CONTENTS:

Cat BUCYRUS 2810 Operation Manual BI000235 - PDF DOWNLOAD

OPERATING PROCEDURE-RECOMMENDED STEPS TO FOLLOW
- MOTOR IDENTIFICA TION
- AUXILIARY CONTROLLER ASSEMBLY
AUXILIARY CONTROLLER WIRING
- OPERA TORS CONTROL STA TION ASSEMBL Y
WIRING
CONTROL COMPONENT LOCA TION
CONTROL COMPONENT OPERA TION
- I.S. TRAM SWITCH WIRING
- I.S. CONNECTIONS - TRAM INTERFACE BOX
- TRACTION CASE ASSEMBL Y
WIRING
- I.S. TRAM INTERFACE BOX TERMINALS
- SCHEMATIC - TRAM CIRCUIT MANUAL - RADIO
- MAXIMUM TRAM SPEED REFERENCE VOLTAGE CHECKS
- SCR TRAM DRIVE VOLTAGE ADJUSTMENT
- SETTING TRAM VOLTAGES - CLEAN UP - SUMP
- SCR TRAM DRIVE INSTALLATION - TROUBLESHOOTING
- PERSONAL NOTES
- 6 SCR DIAGNOSTIC PANEL
- MAIN CONTROLLER CASE ASSEMBLY
WIRING
CONTACTOR PANEL
- PERSONAL NOTES
- CONTACTORS
- CONTACTOR TROUBLESHOOTING
- INSTANTANEOUS OVERLOAD ADJUSTMENT LOCATIONS
- THERMAL OVERLOAD RELA YS
- I.S. POWER SUPPLY WIRING
- TIMERS
- PERSONAL NOTES
- RADIO BASICS
- RADIO COMPONENTS
- RADIO TRANSMITTER OPERATION
- PERSONAL NOTES
- RADIO RECIEVER
- RADIO RELAY BOX - TERMINAL CONNECTIONS
- RADIO RELA Y BOX SCHEMA TIC
- I.S. SOLENOID COMPONENTS
- I.S. SOLENOID WIRING
- I.S. SOLENOID VOLTAGE CHECKS
- X/P SOLENOID CIRCUIT - WIRING AND VOLTAGE CHECKS
- SCHEMATICS - POWER, CONTROL
- ELECTRICAL CIRCUIT EXPLANATION - RADIO
- ELECTRICAL CIRCUIT EXPLANATION - MANUAL
- PERSONAL NOTES

S.M 25/3/2025