Fassi Cranes F 600/700XP.23 use and maintenance Manual – PDF DOWNLOAD

Fassi Cranes F 600/700XP.23 use and maintenance Manual – PDF DOWNLOAD

FILE DETAILS:

Fassi Cranes F 600/700XP.23 use and maintenance Manual – PDF DOWNLOAD

Language : English
Pages :63
Downloadable : Yes
File Type : PDF

TABLE OF CONTENTS:

Fassi Cranes F 600/700XP.23 use and maintenance Manual – PDF DOWNLOAD

INDEX
A0 INTRODUCTION
B0 SAFETY NORMS
C0 WARNING AND INSTRUCTIONS
C0.1 Before operating
C0.2 During operation
C0.3 At the end of the operation (Prior to driving the vehicle)
D0 CLASSIFICATION OF THE CRANE MODEL
D0.1 Technical data
D1 IDENTIFICATION OF THE CRANE MODEL
D1.1 Crane mark
E0 CRANE NOMENCLATURE
E0.1 Controls for crane and outriggers through push-button panel of the
radio remote control
F0 NOMENCLATURE OF THE SAFETY AND PROTECTION DEVICES
F0.1 Controls for crane and outriggers through push-button panel of the
radio remote control
G0 SUPPLEMENTARY BEAMS
G0.1 Identification of the supplementary beams
G1 TILTABLE OUTRIGGER RAMS
G2 MANOEUVRES AND CONTROLS TO STABILIZE THE VEHICLE
G2.1 Functions of control levers for stabilization
G2.2 Controls to stabilize the vehicle
G2.2.1 Crane with fixed or manually tiltable supports for outrigger rams
G2.2.2 Crane with hydraulic tiltable supports (WITH CHAIN) for outrigger rams
G2.2.3 Crane with hydraulic tiltable supports (SLEW RING) for outrigger rams
H0 CONTROLS TO OPERATE THE CRANE
H0.1 Manoeuvres to unfold the crane into a working condition
H0.2 Manoeuvres to fold the crane into the rest condition
Edition 10.10.2002
H1 MANOEUVRES OF THE CRANE LOADS
H1.1 Lifting moment limiting device “ELECTRONIC”
H1.2 Control panels
H1.3 Lifting moment limiting device for two working sectors (optional)
H1.4 Rotation limiting device
H1.5 XP device
H1.5.1 Activation and instructions for use of the XP/V device
H1.6 In the case of the appearance of the signal “ALARM” on the display of
the push-button panel or in case of an electrical failure
H1.6.0 Diagnostic (Alarms/Input/Output) LME vers. 4-5
H1.6.1 Temporary OVERIDE-Reactivation for the crane functions in case of the
appearance of the signal “ALARM” on the display of the push-button
panel
H1.6.2 Temporary OVERIDE-Reactivation for the crane functions in case of an
electrical failure, out of order of the radio remote control, or of the
appearance of the signal “ALARM” on the display of the push-button
panel (in this case, we cannot reactivate the crane functions)
L0 USE OF IMPLEMENTS
L0.1 Hydraulic connections for implements – supplementary hoses
L1 MANUAL EXTENSIONS
L2 CONTROLS TO OPERATE THE HYDRAULIC IMPLEMENTS OF THE CRANE
L3 WINCH
L3.1 Winch for crane
L3.1.1 Winches equipped with an electric stroke end device
L3.1.2 Winches equipped with a mechanical stroke end device
L4 HYDRAULIC JIBS
L4.1 Identification of the hydraulic jib
L4.2 Nomenclature of the hydraulic jib
L4.3 Manoeuvres to unfold the jib in working condition
L4.4 Manoeuvres to fold the jib in rest condition
L4.5 Operations to remove the hydraulic jib from the crane
L4.6 Operations to mount the hydraulic jib on the crane
M0 MAINTENANCE INSTRUCTIONS
M0.0 Timer
M0.1 At the end of every working day
M0.2 After the first 40 hours use
M0.3 After every working week
M0.4 After every 500 working hours
M0.5 After every working year
M0.6 Complete overhaul of the crane is required when 10.000 working hours
or 10 years’ life are reached
N0 TABLE OF HYDRAULIC OIL AND LUBRICANTS CHARACTERISTICS
P0 POSSIBLE FAULTS
P0.1 Operations which can be carried out by the user
P0.2 Operations to be carried out by a service center
R0 INSTRUCTION AND WARNING PLATES
S0 HYDRAULIC SCHEMATICS
T0 ELECTRIC SCHEMATICS
V0 CAPACITY PLATES

IMAGES PREVIEW OF THE MANUAL: