Fassi Cranes F155A.F165AXP.22 Use and Maintenance Manual – PDF DOWNLOAD

Fassi Cranes F155A.F165AXP.22 Use and Maintenance Manual – PDF DOWNLOAD

FILE DETAILS:

Fassi Cranes F155A.F165AXP.22 Use and Maintenance Manual – PDF DOWNLOAD

Language : English
Pages :112
Downloadable : Yes
File Type : PDF

TABLE OF CONTENTS:

Fassi Cranes F155A.F165AXP.22 Use and Maintenance Manual – PDF DOWNLOAD

INDEX
1 INTRODUCTION
2 CLASSIFICATION OF THE CRANE MODEL
2.1 Generality
2.2 Hydraulic jibs (not available)
2.3 Technical data
3 CAPACITY PLATES
3.1 Generality
3.2 Capacity plates with lifting moment limiting device
3.3 Capacity plates with load limiting device
4 HYDRAULIC SCHEMATICS (version with lifting moment limiting device) ( )
4.1 HYDRAULIC SCHEMATICS (version with load limiting device)
5 ELECTRIC SCHEMATICS (version with lifting moment limiting device) ( )
6 SAFETY NORMS
7 WARNING AND INSTRUCTIONS
7.1 Generality
7.2 Before operating
7.3 During operation
7.4 At the end of the operation (Prior to driving the vehicle)
7.5 Residual risks
8 IDENTIFICATION OF THE CRANE MODEL
8.1 Generality
8.2 Crane mark
9 CRANE NOMENCLATURE
9.1 Crane with ground controls on both sides
9.2 Crane with top seat controls and with ground controls for outriggers
10 NOMENCLATURE OF THE SAFETY AND PROTECTION DEVICES
10.1 Crane with ground controls on both sides
10.2 Crane with top seat controls and with ground controls for outriggers
11 SUPPLEMENTARY BEAMS
11.1 Generality
11.2 Identification of the supplementary beams
12 TILTABLE OUTRIGGER RAMS
12.1 Manually tiltable outrigger rams
13 MANOEUVRES AND CONTROLS TO STABILIZE THE VEHICLE
13.1 Generality
13.2 Manual extension and re-entry of the outrigger supports
13.3 Functions of control levers for stabilization with radio-remote control
13.4 Functions of control levers for stabilization
13.5 Controls to stabilize the vehicle
13.5.1 Crane with hydraulic tiltable supports (with hydraulic motor) for outrigger rams
13.6 M.O.L. Device
14 CONTROLS TO OPERATE THE CRANE
14.1 Generality
Edition ExtraCE 17.10.2008
14.2 Radio-remote control
14.2.1 Use of the radio-remote control
14.2.2 Push-button panel of the radio remote control “RCH”
14.2.3 Push-button panel of the radio remote control “SCANRECO”
14.2.4 Icon legend
14.3 Emergency station from the column (if accessible)
14.4 Manoeuvres to unfold the crane into a working condition
14.5 Manoeuvres to fold the crane into the rest condition
14.6 Manoeuvres to unfold the crane “C” into a working condition (only for the crane version C)
14.7 Manoeuvres to fold the crane “C” into the rest condition (only for the crane version C)
14.8 Indicator of inner boom horizontal position (optional)
14.9 Stand-up control station (if fitted)
15 MANOEUVRES OF THE CRANE LOADS (version with load limiting device)
15.1 Generality
16 MANOEUVRES OF THE CRANE LOADS (version with lifting moment limiting device) ( )
16.1 Generality
16.2 Lifting moment limiting device “EVOLUTION” (LMEV) and automatic dynamic control (ADC)
16.3 Control panels of the lifting moment limiting device (if fitted)
16.4 Load handling
16.4.1 “Block due to overload condition”
16.4.2 “Winch off” (if fitted)
16.4.3 “Lifting block” (Prolink)
16.4.4 Other functional characteristics
16.4.5 Visual indicator yellow/red light
16.5 Lifting moment limiting device for two working sectors
16.6 Rotation limiting device
16.7 Setting menu
16.8 Diagnostic: alarms and warnings
16.8.1 Temporary OVERRIDE-Reactivation for the crane functions
16.9 XP device (if fitted)
16.9.1 Activation and instructions for use of the XP/CR device (if fitted)
17 USE OF IMPLEMENTS
17.1 Generality
17.2 Hydraulic connections for implements – supplementary hoses
17.3 Oil cooler (heat exchanger)
18 MANUAL EXTENSIONS
18.1 Generality
18.2 Lifting moment limiting device “ELECTRONIC” for the manual extensions (see Chapter 16.7)
19 CONTROLS TO OPERATE THE HYDRAULIC IMPLEMENTS OF THE CRANE
20 HYDRAULIC JIBS (not available)
20.1 Generality
20.2 Identification of the hydraulic jib
20.3 Nomenclature of the hydraulic jib
20.4 Ma no e u vres to un fold the jib in wor king con di tion
20.5 Ma no e u vres to fold the jib in rest con di tion
20.6 O pe ra tions to re mo ve the hy dra u lic jib from the cra ne
20.7 O pe ra tions to mount the hy dra u lic jib on the cra ne
20.8 Crane with lifting moment limiting device and “Prolink” (if fitted)
21 WINCH (if fitted)
21.1 Generality (version with lifting moment limiting device)
21.2 Winch for crane (version with lifting moment limiting device)
21.2.1 Winches equipped with a mechanical stroke end device (version with lifting moment limiting device)
21.3 Generality (version with load limiting device)
21.4 Winch for crane (version with load limiting device)
21.4.1 Winches equipped with a mechanical stroke end device (version with load limiting device)
22 MAINTENANCE INSTRUCTIONS
22.1 Generality
22.2 After every 8 working hours or at the end of every working day
22.3 After every 40 working hours or after every working week
22.4 After every 100 working hours or more frequently in case of more intensive utilisation
22.5 After every 500 working hours or after every 6 working months
22.6 After every 1000 working hours or after every working year
22.7 Complete overhaul of the crane is required when 10.000 working hours or 10 years’life are reached
22.8 Instructions for the dismantlement and the demolition of a FASSI crane
23 TABLE OF HYDRAULIC OIL AND LUBRICANTS CHA RAC TE RI STI CS
24 POSSIBLE FAULTS
24.1 Generality
24.2 Only operations which can be carried out by the user
24.3 Operations to be carried out only by a service center
25 INSTRUCTION AND WARNING PLATES

IMAGES PREVIEW OF THE MANUAL: