Frontier Tandem Agricultural Disks TM5118 TM5120 TM5121 TM5124 Operator’s Manual(5KBTSWMAN) – PDF DOWNLOAD

FILE DETAILS:

Frontier Tandem Agricultural Disks TM5118 TM5120 TM5121 TM5124 Operator’s Manual(5KBTSWMAN) – PDF DOWNLOAD

Language : English
Pages :66
Downloadable : Yes
File Type : PDF
Size:9.31 MB

DESCRIPTION

Frontier Tandem Agricultural Disks TM5118 TM5120 TM5121 TM5124 Operator’s Manual(5KBTSWMAN) – PDF DOWNLOAD

Introduction

• READ THIS MANUAL carefully to learn how to operate and service your machine correctly. Failure to do so could result in personal injury or equipment damage. This manual and safety signs on your machine may be ordered from your John Deere dealer.
• THIS MANUAL SHOULD BE CONSIDERED a permanent part of your machine and should remain with the machine when you sell it. MEASUREMENTS in this manual are given in customary U.S. units. Only use the correct replacement parts and fasteners.
• RIGHT-HAND AND LEFT-HAND sides are determined by facing in the direction the implement will travel when going forward. WRITE DOWN PRODUCT IDENTIFICATION NUMBERS. Accurately record all the numbers to help in tracing the machine should it be stolen.
• Your John Deere dealer also needs these numbers when you order parts. File the identification numbers in a secure place away from the machine. WARRANTY coverage is provided by John Deere according to the terms of the Construction, Utility, and Forestry Products Standard Warranty Statement. Carefully read the warranty statement on the back of your original purchase order for details on coverage and limitations of this warranty.
• This warranty provides you the assurance that Frontier will back its products where defects appear within the warranty period. In some circumstances, Frontier also provides field improvements, often without charge to the customer, even if the product is out of warranty.
• Should the equipment be abused or modified to change its performance beyond the original factory specifications, or if the equipment is used for a purpose other than that which it was designed for, the warranty will become void and field improvements may be denied. THE TIRE MANUFACTURERS warranty is separate and apart from the equipment warranty and may not apply outside the U.S. 1

TABLE OF CONTENTS:

Frontier Tandem Agricultural Disks TM5118 TM5120 TM5121 TM5124 Operator’s Manual(5KBTSWMAN) – PDF DOWNLOAD

Introduction 1
General Arrangement 4
General Information 5
Pre-Delivery Checklist 6
Delivery Checklist 6
After Sale Checklist 7
Daily Checklist 7
Seasonal Checklist 7
Decal Identification and Placement 8
Safety First 9
Attaching the Disc to the Tractor 10
Transporting the Disc 10
Adjusting the Transport Levelling Control Arm 11
Transport and Operating Safety 12
Operating the Disk
General Operating Guidelines 13
Adjust the Levelling Control Arm 13
Service and Maintenance Safety 14
Lubricate the Disk 15
Check the Oil-Bath Bearings 16
Adjusting the Scrapers 16
Repack and Pre-Load Wheel Hub Bearings 17
Fluid and Fastener Specifications
Disc Gang Assembly Axles 18
Fastener Torque Values 18
Oil-Bath Bearing Oil 18
Tire and Wheel Service 18
Keep Gang Assemblies Tight 19
Assembly Safety 20
Assemble the Disk 21
Hydraulic Lift Cylinder Schematic 29
Hydraulic Fold Cylinder Schematic 30
Hydraulic Fold Cylinder Schematic c/w Wing Control 31
Mount Wing Control and Shut-Off Valves 32
Using Disc with Optional Wing Control 33
Light Kit Component Installation 34
Light Kit Schematic 35
Detailed Parts Diagrams
Hitch Bridle Assembly 37
Center Frame and Transport Assembly 38
Right Hand Wing Frame and Transport Assembly 39
Left Hand Wing Frame and Transport Assembly 40
Control Arm Assemblies 41
Gang Bars and Scrapers 42
Gang Assembly (1-5/8” Axle) 43
Gang Assembly (2-1/8” Axle) 44
Oil-Bath Bearing Assembly (1-5/8” Axle) 45
Oil-Bath Bearing Assembly (2-1/8” Axle) 46
8” Hydraulic Cylinder (CTD) 47
8” Hydraulic Cylinder (RAM) 48
12” Hydraulic Cylinder (CTD) 49
12” Hydraulic Cylinder (RAM) 50
34” Hydraulic Cylinder (CTD) 51
34” Hydraulic Cylinder (RAM) 52
Disc Blades 53
Oscillating Scraper (Optional) 54
8-Bolt Hub 55
Tire and Wheel Assembly 56
Hydraulic Lift Cylinders and Hose Assembly 57
Hydraulic Fold Cylinders and Hose Assembly 58
Hydraulic Fold Cylinders and Hose Assembly c/w Wing Control 59
Light Kit Components 60
Light Kit Schematic 61
Decals, Reflectors and Logos 62
Specifications 63
Storage 64

IMAGES PREVIEW OF THE MANUAL: