Gehl 5625 Series II Skid Loaders Operator’s Manual 907248A – PDF DOWNLOAD

Gehl 5625 Series II Skid Loaders Operator’s Manual 907248A – PDF DOWNLOAD

FILE DETAILS:

Gehl 5625 Series II Skid Loaders Operator’s Manual 907248A – PDF DOWNLOAD

Language : English
Pages : 92
Downloadable : Yes
File Type : PDF
Size: 4.72 MB

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Gehl 5625 Series II Skid Loaders Operator’s Manual 907248A – PDF DOWNLOAD

INTRODUCTION:

The information in this Operator’s Manual was written to give the owner/operator assistance in preparing, adjusting,
maintaining and servicing of the Loader. More importantly, this manual provides an operating plan for safe and proper use of the machine. Major points of safe operation are detailed in the SAFETY chapter of this manual. A chart of standard hardware torques is located in the back of this manual.

• The GEHL Company asks that you read and understand the contents of this manual COMPLETELY and become familiar with your new machine, BEFORE attempting to operate it. Throughout this manual, information is provided which is set in italic type and introduced by the word NOTE. Be sure to read carefully and comply with the message or directive given.
• Following this information will improve your operating or maintenance efficiency, help you to avoid breakdowns or damage and extend your machine’s life. A plastic container is provided on the unit for storing the Operator’s Manual. After using the Manual, please return it to the container and keep it with the unit at all times! If this machine is resold, GEHL Company recommends that this Manual be given to the new owner.
• “Right” and “left” are determined from a position sitting on the Seat and facing forward. From this position: If your Loader is T-Bar Controlled: the Propulsion (Traction) Control T-Bar is on the “left” and the Liftffilt Control T-Bar is on the “right”. If your Loader is Hand/Foot Controlled: The “left” T-Bar controls the Propulsion (Traction) on the left side of the machine. The “right” T-Bar controls Propulsion (Traction) on the right side of the machine. The “leji” Foot Pedal controls the Lift. The “right” Foot Pedal controls the Tilt.
• Our wide Dealership network stands by to provide you with any assistance you may require, including genuine GEHL service parts. All parts should be obtained from or ordered through your GEHL Dealer. Give complete information about the PaIt and include the model and serial numbers of your machine.
• Record the serial number in the space provided on the previous page, as a handy record for quick reference. GEHL Company reserves the right to make changes or improvements in the design or construction of any part without incurring the obligation to install such changes on any unit previously delivered.

TABLE OF CONTENTS:

Gehl 5625 Series II Skid Loaders Operator’s Manual 907248A – PDF DOWNLOAD

International Symbols
Introduction
Specifications
Check Lists
Safety
Controls & Safety Equipment
Operation
Adjustments
Lubrication
Attachments & Accessories
Troubleshooting
Service
Decal Locations
Maintenance Schedule
Index
Standard Hardware Torque
Warranty
IDENTIFICATION INFORMATION