Gehl 5635 6635 SX DX Turbo Skid Loader Operator’s Manual 907283 – PDF DOWNLOAD

Gehl 5635 6635 SX DX Turbo Skid Loader Operator’s Manual 907283 – PDF DOWNLOAD

FILE DETAILS:

Gehl 5635 6635 SX DX Turbo Skid Loader Operator’s Manual 907283 – PDF DOWNLOAD

Language : English
Pages : 82
Downloadable : Yes
File Type : PDF
Size: 4.21 MB

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Gehl 5635 6635 SX DX Turbo Skid Loader Operator’s Manual 907283 – PDF DOWNLOAD

INTRODUCTION:

• The information in this Operator’s Manual was written to give the owner/operator assistance in preparing, adjusting,
  maintaining and servicing of the Loader. More importantly, this manual provides an operating plan for safe and proper use of the machine. Major points of safe operation are detailed in the SAFETY chapter of this manual. A chart of standard hardware torques is located in the back of this manual.
• The GEHL Company asks that you read and understand the contents of this manual
  COMPLETELY and become familiar with your new machine, BEFORE attempting to operate it.
• Throughout this manual, information is provided which is set in italic type and introduced by the word NOTE. Be sure
  to read carefully and comply with the message or directive given. Following this information will improve your operating
  or maintenance efficiency, help you to avoid breakdowns or damage and extend your machine’s life.
• A manual box in the Operator’s compartment stores the Operator’s Manual. After using the Manual, please return it to
  the box and keep it with the unit at all times! If this machine is resold, GEHL Company recommends that this Manual
  be given to the new owner.
• “Right” and “left” are determined from a position sitting on the Seat and facing forward. From this position:
• If your Loader is T-Bar Controlled: The left Handle controls the Wheel Drives and the right Handle controls the Lift
  and Tilt.
• If your Loader is Hand/Foot Controlled: The left Handle controls the Wheel Drive on the left side of the machine. The
  right Handle controls the Wheel Drive on the right side of the machine. The left Foot Pedal controls the Lift. The right
  Foot Pedal controls the Tilt.
• If your Loader is Dual Hand Controlled: The left Handle controls the Wheel Drive on the left side of the machine and
  the Lift. The right Handle controls the Wheel Drive on the right side. of the machine and the Tilt.
• Our Dealership network stands by to provide you with any assistance you may require, including genuine GEHL service parts. All parts should be ordered and obtained from your GEHL Dealer. Give complete information about the part and include the model and serial numbers of your machine. Record the serial number in the space provided on the previous page, as a handy record for quick reference.
• GEHL Company reserves the right to make changes or improvements in the design or construction of any part without
  incurring the obligation to install such changes on any unit previously delivered.

TABLE OF CONTENTS:

Gehl 5635 6635 SX DX Turbo Skid Loader Operator’s Manual 907283 – PDF DOWNLOAD

International Symbols . Inside Front Cover
1 Introduction . 2
2 Specifications 4
3 Check Lists 7
4 Safety . . . . . 10
5 Controls & Safety Equipment . 19
6 Operation 33
7 Adjustments 43
8 Lubrication 47
9 Troubleshooting . 50
10 Service . ….. 57
11 Maintenance Schedule 71
Index ……… 75
Standard Hardware Torque 78
Warranty ……… . Inside Back Cover