Gehl Crop Processor CP1000 Operators Manual 908028 – PDF DOWNLOAD

Gehl Crop Processor CP1000 Operators Manual 908028 – PDF DOWNLOAD

DESCRIPTION:

Gehl Crop Processor CP1000 Operators Manual 908028 – PDF DOWNLOAD

INTRODUCTION

• Thank you for purchasing this piece of Gehl equipment. We are sure that your decision was strongly considered and that you are looking forward to many years of work from this machine. We, as a Company, have invested a great deal of time and effort in developing our lines of equipment.
• The equipment you have purchased is built with a great deal of pride and designed to give you long life, efficient operation, durability and dependability. This manual was developed specifically for the machine you have purchased. The information within is for your assistance in preparing, adjusting, maintaining and servicing your machine. More importantly, this manual provides an operating plan for safe and proper use of your machine.
• Major points of safe operation are detailed in the SAFETY chapter of this manual. Refer to the Table of Contents for an outline (by chapters) of this manual. Use the Index, located at the back of this manual, for specific references. A chart depicting standard hardware torques is located on the inside back cover.
• A Manual Pocket is provided on the Harvester, forward of the Toolbox, for storing the Harvester and Attachment( s) Operator’s Manuals and Parts Manuals. After using the Manuals, please return them to the Pocket and keep them with the unit at all times! Furthermore, if this machine is resold, Gehl Company recommends that these Manuals be given to the new owner. Modern machinery has become more sophisticated and, with that in mind, Gehl Company asks that you read and understand the contents of this manual COMPLETELY and become familiar with your new machine, BEFORE attempting to operate it.
• The Gehl dealer organization stands ready to provide you with any assistance you may require and carries genuine Gehl service parts. All parts should be obtained from or ordered through your Gehl Dealer. Give complete information about the part and include the model and serial numbers of your Harvester. Serial Numbers for the CP1000 unit are stamped on a plate located on top of the Crop Processor.
• “Right” and “left” are determined from a position standing behind the unit and facing forward. From this position, the Drive Sheaves are on the “right.” Throughout this manual, information is provided which is set in italic type and introduced by the word NOTE or IMPORTANT. BE SURE to read carefully and comply with the message or directive given.
• Following this information will improve your operating or maintenance efficiency, help you to avoid costly breakdowns or unnecessary damage and extend your machine’s life. Gehl Company reserves the right to make changes or improvements in the design or construction of any part without incurring the obligation to install such changes on any unit previously delivered.

TABLE OF CONTENTS:

Gehl Crop Processor CP1000 Operators Manual 908028 – PDF DOWNLOAD

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Front Cover
CHAPTER 1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
CHAPTER 2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
CHAPTER 3
Checklists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
CHAPTER 4
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
CHAPTER 5
Controls and Safety Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CHAPTER 6
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CHAPTER 7
Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CHAPTER 8
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
CHAPTER 9
Preparing for Field Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CHAPTER 10
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
CHAPTER 11
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
CHAPTER 12
Set-up and Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
CHAPTER 13
Decal Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Torque Specification Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Rear Cover

IMAGES PREVIEW OF THE MANUAL: