Gehl Forage Box BU980 Operators Manual 907591 – PDF DOWNLOAD

DESCRIPTION:

Gehl Forage Box BU980 Operators Manual 907591 – PDF DOWNLOAD

CHAPTER 1
INTRODUCTION

• Your decision to purchase this piece of GEHL equipment was a good one. We are sure that your decision was strongly considered and that you are looking forward to many seasons of reliable performance from this machine. We, as a Company, have invested a great deal of time and effort in developing our lines of equipment.
• The equipment you have purchased is built with a great deal of pride and designed to give you long life, efficient operation, durability and dependability. This manual was developed specifically for the machine you have purchased. The information within is for your assistance in preparing, adjusting, maintaining and servicing your machine. More importantly, this manual provides an operating plan for safe and proper use of your machine.
• Major points of safe operation are detailed in the SAFETY chapter of this manual. Refer to the Table of Contents for an outline (by chapters) of this manual. Use the Index, located at the back of this manual, for specific chapter and topic/page number references.
• This GEHL equipment is provided with its Operator’s Manual attached to it. After using it, please keep this Manual with the unit at all times! Furthermore, we recommend if this machine is re-sold that this Manual accompany the unit.
• Modern machinery has become more sophisticated and, with that in mind, GEHL Company asks that you read and understand the contents of this manual COMPLETELY and become familiar with your new machine, BEFORE attempting to operate it.
• Our wide Dealership network stands by to provide any assistance required, including genuine GEHL service parts. All parts should be obtained from or ordered through your GEHL Dealer.
• Give complete information about the part as well as the model number and serial number of your machine. Record numbers, in the spaces provided, as a handy record for quick reference.
• The model number and serial number for this unit are on a decal located on the right side of the Unloading Unit above the Transmission.
• “Right” and “Left” are determined from a position standing at the rear of the unit and looking toward the direction of travel. From Typical Model & Serial Number Plate BU980 COMPANY WE S T B E N D , WI 5 3 0 9 5 U S A M O D E L N O . S E R I A L N O . (Fill In) (Fill In) this position, the Cross Conveyor is on the front and discharges from the “left” side. Standard hardware torques appear in a chart at the end of the manual. GEHL Company reserves the right to make changes or improvements in the design or construction of any part without incurring the obligation to install such changes on any unit previously delivered.
• Throughout this manual, information is provided which is set in italic type and introduced by the word NOTE. BE SURE to read carefully and comply with the message or directive given. Following this information will improve your operating or maintenance efficiency, help you to avoid costly breakdowns or unnecessary damage and extend your machine’s life.
• The GEHL Company, in cooperation with the American Society of Agricultural Engineers and the Society of Automotive Engineers, has adopted this SAFETY ALERT SYMBOL to pinpoint characteristics which, if not properly followed, can create a safety hazard. When you see this symbol in this manual or on the unit itself, you are reminded to BE ALERT! Your personal safety is involved.

TABLE OF CONTENTS:

Gehl Forage Box BU980 Operators Manual 907591 – PDF DOWNLOAD

Warranty Inside Front Cover
Chapter 1 Introduction 2
Chapter 2 Specifications 3
Chapter 3 Checklists 5
Chapter 4 Safety 8
Chapter 5 Controls & Safety Equipment 14
Chapter 6 Operation 18
Chapter 7 Adjustments 22
Chapter 8 Lubrication 26
Chapter 9 Service 28
Chapter 10 Preparing For Field Operation 31
Chapter 11 Transporting 32
Chapter 12 Storage 33
Chapter 13 Troubleshooting 34
Chapter 14 Set-up & Assembly 36
Chapter 15 Optional Features & Accessories 40
Chapter 16 Decal Locations 42
Chapter 17 Maintenance Log 46
Index 47
Standard Hardware Torque Data Inside Back Cover

IMAGES PREVIEW OF THE MANUAL: