Gehl Mixer Feeder MF8000 Series MF8435 MF8500 Operator’s Manual 907122A – PDF DOWNLOAD

Gehl Mixer Feeder MF8000 Series MF8435 MF8500 Operator’s Manual 907122A – PDF DOWNLOAD

FILE DETAILS:

Gehl Mixer Feeder MF8000 Series MF8435 MF8500 Operator’s Manual 907122A – PDF DOWNLOAD

Language : English
Pages : 16
Downloadable : Yes
File Type : PDF
Size: 0.4 MB

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Gehl Mixer Feeder MF8000 Series MF8435 MF8500 Operator’s Manual 907122A – PDF DOWNLOAD

GENERAL INFORMATION:

This Supplement provides illustrated details for installation and operation of a Truck-mounted MF8000 Series Mixer Feeder. This Supplement is to be used in conjunction with the Operator’s Manual titled “8000 Series Mixer Feeders”. Refer to the Table provided for sizing and truck selection information.

Selecting a Mixer Feeder :

• Refer to the MF8000 Series Mixer Feeder Operator’s Manual and select the appropriate Mixer Feeder (MF8435 or MF8500) on the basis of your own particular mixing and feeding requirements.
• Hydraulic and electric power, to run the Mixer Feeder and Discharge Conveyor, is derived from the truck engine, electrical system and Drive Line-powered hydraulic system.

Selecting a Truck:

• Select a single rear axle truck with a weight carrying capacity at least equal to the respective value listed in Table 1 and Cab to Axle Dimension listed in Table 2.
• In addition, the truck should be equipped with a hand throttle and a tachometer. Using the following “Power Take Off” and ”Engine Horsepower Requirements”, select the proper truck PTO and truck engine size.

Power Take Off Requirements:
The truck PTO assembly should be:
1. Capable of transmitting a minimum of 200 ft-lb
(271 N-m) torque.
2. Rotation opposite that of truck engine crankshaft
so that the PTO Drive Shaft rotates clockwise as
viewed from the back of the Mixer Feeder/truck.