Gehl Telescopic Handler RS6-42, RS8-42, RS8-44, RS10-44, RS10-55, RS12-42 Service Manual 913233 PDF

Gehl Telescopic Handler RS6-42, RS8-42, RS8-44, RS10-44, RS10-55, RS12-42 Service Manual 913233 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

  
DESCRIPTION:

Gehl Telescopic Handler RS6-42, RS8-42, RS8-44, RS10-44, RS10-55, RS12-42 Service Manual 913233 – PDF DOWNLOAD

RS6-42
RS8-42 / RS8-44
RS10-44 / RS10-55
RS12-42

INTRODUCTION

• With correct maintenance and proper use, this Gehl RS Telescopic Handler will give years of dependable service. This service manual is intended to be a guide in the assembly and disassembly, installation and removal, adjustment and testing, troubleshooting and replacement of components that together make up the
• Gehl RS10-55, RS8-44, RS8-42 and RS6-42 Telescopic Handler. The Table of Contents can be used to make the procedure you need to find an easier process.
• Many photographs, schematics and line art drawings are used to help perform the necessary repairs, tests, or adjustments that this RS Series Telescopic Handler needs to keep it in good running condition.If you have any additional questions, please contact your authorized Gehl dealer or call the Gehl Service Department for assistance

SAFETY

• The above Safety Alert Symbol means ATTENTION! ALWAYS BE ALERT! YOUR SAFETY IS INVOLVED! It stresses an attitude of “safety awareness” and can be found throughout this Operator’s Manual and on the machine itself. Before operating this equipment, read and study the following safety information.
• In addition, be sure that everyone who operates or works with this equipment is familiar with these safety precautions. Gehl Company ALWAYS takes the operator’s safety into consideration when designing its machinery, and guards exposed moving parts for his/her protection.
• However, some areas cannot be guarded in order to assure proper operation. Further, this Operator’s Manual, AEM Safety Manual and decals on the machine warn of additional hazards, and should be read and observed closely.
• REMEMBER! It is the owner’s responsibility for communicating information on the safe use and proper maintenance of this machine! This includes providing understandable interpretations of these instructions for operators who are not fluent in reading English. It is the responsibility of the operator to read and understand the Operator’s Manual and other information provided and use the correct operating procedure. Machines should be operated only by qualified operators.
  TABLE OF CONTENTS:

Gehl Telescopic Handler RS6-42, RS8-42, RS8-44, RS10-44, RS10-55, RS12-42 Service Manual 913233 – PDF DOWNLOAD

RS Series Service Manual 913233
Table of Contents – pg1
Table of Contents – pg2
100 – Safety
101 – Specifications
201 – Engine
301 – Electrical
302 – Battery
401 – Steering Control Valve
501 – Transmission
502 – Rear Axle
503 – Front Axle
601 – Hydraulics
602 – Hydraulic Pump
603 – Frame Leveling Cylinder
604 – Tilt Cylinder
605 – Hydraulic Cylinder Repair
606 – Stabilizing Cylinder
607 – Stabilizing Cylinder Repair
608 – Slave Cylinder
609 – Lift Cylinder
610 – Boom Extend Cylinder (3-section boom)
611 – Boom Extend Cylinder (4-section boom)
701 – Boom Assembly (3-section Boom)
702 – Single and Double Leaf Chain (3-section boom)
703 – Inner Boom (3-section boom)
704 – Double Chain and Roller Bearing (3-section Boom)
705 – Single Chain and Roller Bearing (3-section boom)
706 – Intermediate Boom (3-section boom)
707 – Boom Pad (3-section boom)
708 – Overview (4-section boom)
709 – Boom Assembly (4-section boom)
710 – 1st Intermediate boom (4-section boom)
711 – 2nd intermediate boom (4-section boom)
712 – Inner boom (4-section boom)
713 – Boom Hydraulic Hose and Tube Replacement (4-section boom) ….375
714 – Boom Pad Overview (4-section boom)
715 – Boom Pad Replacement (4-section boom)
716 – Overview Boom Chains and Rollers (4-section boom)
717 – Inner Boom Top Chain (4-section boom)
718 – Inner Boom Bottom Chain and Roller (4-section boom)
719 – 2nd Intermediate Boom Chain and Roller (4-section boom)
720 – Outer Boom Chain and Roller (4-section boom)
721 – Boom Chain Adjustment (4-section boom)
800 – Hood and Cover