Gehl Windrow Merger WM2109 Operators Manual 918015D – PDF DOWNLOAD

Gehl Windrow Merger WM2109 Operators Manual 918015D – PDF DOWNLOAD

DESCRIPTION:

Gehl Windrow Merger WM2109 Operators Manual 918015D – PDF DOWNLOAD

CHAPTER 1
INTRODUCTION

• Your decision to purchase this piece of Gehl equipment was a good one. We are sure that your decision was carefully considered and that you are looking forward to many seasons of reliable performance from this machine. Gehl Company has invested much time and effort in developing its lines of equipment. The equipment you have purchased is built with a great deal of pride, and designed to provide long life, efficient operation, durability and dependability.
• Modern machinery has become more sophisticated and, with that in mind, Gehl Company asks that you read and COMPLETELY understand the contents of this manual and become familiar with your new machine, BEFORE attempting to operate it. This manual was developed specifically for the machine you have purchased. The information within is for your assistance in preparing, adjusting, maintaining and servicing your machine.
• More important, this manual provides an operating plan for safe and proper use of your machine. Major points of safe operation are detailed in the SAFETY chapter of this manual. Refer to the Table of Contents for an outline (by chapters) of this manual. Use the Index, located at the back of this manual, for specific chapter and topic/page number references. If this machine is resold, Gehl Company recommends that this manual be given to the new owner.
• If this machine was purchased “used,” or if the owner’s address has changed, please provide your Gehl dealer or Gehl Company with the owner’s name and current address, along with the machine model and serial number. This will allow the registered owner information to be updated, so that the owner can be notified directly in case of an important product issue, such as a safety update program.
• Our wide dealership network stands ready to provide any assistance required, including genuine Gehl service parts. All parts should be obtained from or ordered through your Gehl dealer. Give complete information about the part as well as the model number and serial number of your machine. Record numbers, in the spaces provided, as a handy record for quick reference. Typical Model & Serial Number Plate
• COMPANY W E S T B E N D , W I 5 3 0 9 5 U S A M O D E L N O . S E R I A L N O . (Fill In) (Fill In) The Windrow Merger model and serial numbers are on a plate located on the right end of the pickup.
• “Right” and “left” are determined from a position standing behind the Windrow Merger facing the direction of travel. From this position, the tongue is on the “left” side. Gehl Company reserves the right to make changes or improvements in the design or construction of any part without incurring the obligation to install such changes on any unit previously delivered. Standard hardware and hydraulic fitting torques appear in charts at the end of the manual.
• Throughout this manual information is provided that is set in italic type and introduced by the word NOTE or IMPORTANT. BE SURE to read carefully and comply with the message or directive given. Following this information will improve your operating or maintenance efficiency, help you to avoid costly breakdowns or unnecessary damage and extend your machine’s life. The Gehl Company, in cooperation with the American Society of Agricultural Engineers and the Society of Automotive Engineers, has adopted this SAFETY ALERT SYMBOL

TABLE OF CONTENTS:

Gehl Windrow Merger WM2109 Operators Manual 918015D – PDF DOWNLOAD

Warranty Inside front cover
Chapter 1
Introduction 2
Chapter 2
Specifications 3-4
Chapter 3
Checklists 5-7
Chapter 4
Safety 8-11
Chapter 5
Controls & Safety Equipment 12-14
Chapter 6
Operation 15-21
Chapter 7
Care & Maintenance 22-36
Adjustments 22-27
Lubrication 28-29
Service 30-36
Chapter 8
Transporting 37-38
Chapter 9
Storage 39
Chapter 10
Troubleshooting 40-42
Chapter 11
Optional Features & Accessories 43
Chapter 12
Decal Locations 44-47
Chapter 13
Maintenance Log 48
Index 49-50
Notes 51
Hydraulic Fitting Data 52
Standard Hardware
Torque Data Inside back cover