Gehl Z25 Parts Manual (50940243) – PDF DOWNLOAD

Gehl Z25 Parts Manual (50940243) – PDF DOWNLOAD

DESCRIPTION:

Gehl Z25 Parts Manual (50940243) – PDF DOWNLOAD

General 

• MANITOU AMERICAS, INC. reserves the right to make changes or improvements in the design or construction of any part of the machine without incurring the obligation to install such changes on any previously delivered machines.
• This parts manual should not be used as a technical data reference; it uses simplified illustrations and does not detail servicing procedures

Parts Ordering Information

•  When ordering service parts, specify the correct part number, full description and quantity required, as well as the machine and engine model and serial numbers. For your safety and continued proper operation, use only genuine GEHL service parts.
• “Right”, “left”, “front” and “back” are determined from a position sitting on the operator’s seat and facing forward, and the excavator “house” rotated so that the blade is also facing forward.

Illustrations and Parts Lists 

• Not all parts shown in the illustrations may be included in the parts listings; some are not serviced separately or are not included on engines sold in all areas.
• Ref. Nos. shown in the parts listings without part numbers are shown for reference purposes only and are not available for purchase.
• Boxes or brackets may be used in some illustrations to indicate assemblies (part groupings), or in some cases to highlight different versions of individual parts or assemblies.
• Text references may be present on some illustrations to provide additional information.
• Some illustrations will contain circled letters or a circled combination of letters and numbers in addition to the regular number callouts. These special callouts may be used to identify hydraulic port locations which are marked on components, or to identify the two ends of a hose, tube, or other part that is shown split in the illustration. They may also be used to indicate a common reference point when different versions of components are shown on the illustration.

TABLE OF CONTENTS:

Gehl Z25 Parts Manual (50940243) – PDF DOWNLOAD

INTRODUCTION
INTRODUCTION 1
COMPACT EXCAVATOR
SPECIAL TOOLS, PAINT 4
FIGURE INDEX (1) – MAIN PARTS 6
FIGURE INDEX (2) – HYDRAULIC SECTION 7
LABEL & ACCESSORY
FIG. 1 – LABEL (EXTERIOR) 8
FIG. 3 – LABEL (BONNET INSIDE) 10
FIG. 4 – LABEL (CANOPY) 12
FIG. 139 (5A) – LABEL (CABIN) 14
FIG. 6 – LABEL (QUICK COUPLER) 16
ENGINE RELATED
FIG. 7 – MUFFLER 18
FIG. 8 – AIR CLEANER 20
FIG. 9 – ACCELERATOR (BRACKET) 22
FIG. 11 – ACCELERATOR 24
FIG. 13 – ENGINE MOUNT 26
FIG. 14 – RADIATOR SHROUD 28
FIG. 15 – RADIATOR & SUB TANK 30
FIG. 16 – RADIATOR HOSE 32
FIG. 17 – DUCT 34
FIG. 19 – FUEL TANK 36
FIG. 20 – FUEL PIPE 38
ELECTRICAL PARTS
FIG. 21 – AROUND THE ENGINE 40
FIG. 22 – BATTERY CABLE (NEG.) (-) 43
FIG. 23 – HORN 45
FIG. 24 – STARTER SWITCH 47
FIG. 25 – SEAT MOUNT 49
FIG. 26 – PRESSURE SWITCH 52
FIG. 27 – TRAVEL ALARM 54
FIG. 29 – QUICK COUPLER (SWITCH BOX) 56
FIG. 30 – WORK LAMP 58
FIG. 33 – INSTRUMENT PANEL 60
FIG. 141 (33A) – HEATER (W/ CAB) 62
FIG. 34 – GPS BRACKET 64
FIG. 35 – PANEL PLUGS 66
AIR CONDITIONER & HEATER
FIG. 142 – HEATER (W/ CAB) 68
TRAVELING
FIG. 36 – SPROCKET 70
FIG. 37 – IDLER & ADJUST 72
FIG. 38 – TRACK ROLLER (Y. SPEC. – BEFORE MAY 2014) 74
FIG. 138 (38A) – TRACK ROLLER (K. SPEC. – MAY 2014 AND LATER) 76
FIG. 39 – CARRIER ROLLER 78
FIG. 40 – CRAWLER 80
CONTROL EQUIPMENT
FIG. 41 – TRAVEL PEDAL 82
FIG. 42 – CONTROL VALVE PLATE 84
FIG. 43 – TRAVEL LEVER 86
FIG. 44 – LEVER SPACER 88
FIG. 45 – BLADE LEVER 90
FIG. 46 – ARMREST 92
FIG. 47 – LOCK LEVER & STAND 94
FRAME
FIG. 48 – TRAVEL FRAME 96
FIG. 49 – COUNTER WEIGHT 98
FIG. 50 – TURNING FRAME 100
FIG. 51 – TURNING BEARING 102
COVER
FIG. 52 – COVER (MULTI) 104
FIG. 54 – COVER (TURNING FRAME) 106
FIG. 55 – COVER (TRAVEL FRAME) 108
FIG. 56 – FRAME GUARD (LEFT) 110
FIG. 57 – FRAME GUARD (RIGHT) 112
FIG. 58 – COVER (TURNING FRAME:FRONT LEFT) 114
FIG. 59 – COVER (TURNING FRAME:FRONT RIGHT) 116
AROUND SEAT
FIG. 60 – STEP (CANOPY SPEC.) 118
FIG. 143 (60A) – STEP (CABIN SPEC.) 120
FIG. 61 – COVER (MONITOR) (CANOPY SPEC.) 122
FIG. 144 (61A) – COVER (MONITOR) (CABIN SPEC.) 124
FIG. 62 – COVER (LEVER) 126
FIG. 63 – SEAT MOUNT 128
FIG. 64 – COVER (SEAT MOUNT) 130
FIG. 65 – SEAT 132
FIG. 66 – SEAT (INNER PARTS) 134
FIG. 67 – HANDRAIL (W/CANOPY) 136
BONNET
FIG. 68 – BONNET (REAR) 138
FIG. 70 – BONNET (FRONT) 140
FIG. 71 – BONNET (LEFT) 142
FIG. 73 – BONNET (RIGHT) 144
CANOPY
FIG. 32 – CANOPY LAMP 146
FIG. 75 – CANOPY 148
FIG. 76 – CANOPY MOUNT 150
CABIN
FIG. 145 – CABIN (COMPLETE CABIN/ACCESSORY) 152
FIG. 146 – CABIN (EXTERIOR) 154
FIG. 147 – CABIN (INTERIOR) 156
FIG. 148 – CABIN (GLASS) 158
FIG. 149 – CABIN (WIPER & WINDOW WASHER) 160
FIG. 150 – CABIN (ELECTRICAL PARTS) 162
FIG. 151 – CABIN (DOOR) 164
FIG. 152 – CABIN (FRONT GLASS) 167
HYDRAULIC OIL EQUIPMENT
FIG. 77 – HYDRAULIC PUMP MOUNT 169
FIG. 78 – HYDRAULIC PUMP 171
FIG. 79 – HYDRAULIC PUMP (QUICK COUPLER SPEC.) 175
FIG. 80 – BOOM CYLINDER 179
FIG. 81 – ARM CYLINDER 182
FIG. 82 – ARM CYLINDER (QUICK COUPLER SPEC.) 184
FIG. 83 – BUCKET CYLINDER 186
\FIG. 84 – SWING CYLINDER 188
FIG. 85 – BLADE CYLINDER 190
FIG. 86 – TRAVEL MOTOR 192
FIG. 87 – TURNING MOTOR 195
FIG. 88 – ACCUMULATOR 198
FIG. 89 – SWIVEL JOINT 200
FIG. 90 – CONTROL VALVE (1/7) 202
FIG. 91 – CONTROL VALVE (2/7) 204
FIG. 92 – CONTROL VALVE (3/7) 207
FIG. 93 – CONTROL VALVE (4/7) 209
FIG. 94 – CONTROL VALVE (5/7) 211
FIG. 95 – CONTROL VALVE (6/7) 213
FIG. 96 – CONTROL VALVE (7/7) 215
FIG. 97 – REMOTE CONTROL VALVE (RIGHT) 217
FIG. 98 – REMOTE CONTROL VALVE (LEFT) 219
FIG. 99 – 2-WAY VALVE 221
FIG. 100 – SOLENOID VALVE (P.T.O.) 223
FIG. 101 – SELECTOR VALVE 225
FIG. 102 – HYD. OIL TANK 227
FIG. 120 – QUICK COUPLER (HITCH CYLINDER) 230
HYDRAULIC OIL PIPING
FIG. 103 – TANK-PUMP & CONTROL VALVE 232
FIG. 104 – CONTROL VALVE-TURNING MOTOR 234
FIG. 105 – CONTROL VALVE (FITTING)(1) 236
FIG. 106 – CONTROL VALVE (FITTING)(2) 238
FIG. 107 – CONTROL VALVE (FITTING)(3) 240
FIG. 108 – CONTROL VALVE-RETURN & DRAIN 242
FIG. 109 – CONTROL VALVE-BOOM & SWING 244
FIG. 110 – CONTROL VALVE-SWIVEL JOINT 246
FIG. 111 – TRAVEL FRAME 248
FIG. 112 – ARM & BUCKET 250
FIG. 113 – P.T.O. (CONTROL VALVE-BOOM) 252
FIG. 114 – P.T.O. (BOOM-ARM END) 254
FIG. 116 – P.T.O. (SOLENOID VALVE & SELECTOR VALVE) 256
FIG. 117 – CONTROL PIPING (1) 258
FIG. 118 – CONTROL PIPING (2) 260
FIG. 119 – GREASING 262
FIG. 121 – QUICK COUPLER (1) 264
FIG. 123 – QUICK COUPLER (2) 266
FIG. 124 – QUICK COUPLER (BODY) 268
FIG. 126 – BOOM BRACKET 270
FIG. 128 – BOOM 272
FIG. 130 – ARM 274
FIG. 132 – BUCKET ARM & LINK 276
FIG. 134 – BOOM COVER 278
FIG. 136 – PLUG (IMPLEMENT) 280
FIG. 137 – BLADE 282
HYDRAULIC QUICK-CONNECT COUPLERS 284
TORQUE CHARTS
TORQUE SPECIFICATIONS 286

IMAGES PREVIEW OF THE MANUAL: