Komatsu 210M Dump Truck Operation & Maintenance Manual BFA40A BR 23858 24352 - PDF

Komatsu 210M Dump Truck Operation & Maintenance Manual BFA40A BR 23858 24352

Description:

Komatsu 210M Dump Truck Operation & Maintenance Manual BFA40A BR 23858 24352

• This handbook is intended to provide the HAULPAK® operator with the necessary information to allow for safe and efficient truck operation.
• The HAULPAK® operator should be a qualified individual who has had proper training to achieve full production with the truck. An efficient, qualified operator can help insure long production life of the truck and avoid costly down time due to misuse of the unit and its systems. Training for both operators and maintenance personnel is recommended and is available upon request. Operator training is accomplished at the job site by qualified operator instructors. Maintenance training is provided both in the factory setting and in field schools. All requests for operator and/or maintenance training should be forwarded to the local HAULPAK® Distributor for action.
• This handbook shows dimensioning of U.S. standard and metric (SI) units, and all references to “Right”, “Left”, “Front”, or “Rear” are made with respect to the operator’s normal seated position, unless specifically stated otherwise. Illustrations used in this handbook are typically representative and may not necessarily depict a specific model.
• A Product Identification plate is normally located on the frame in front of the right side front wheel and designates the Truck Model Number, Product Identification Number (vehicle serial number), and Maximum G.V.W. (Gross Vehicle Weight) rating.
• The HAULPAK® Model designation consists of three numbers and one letter (i.e. 210M). The three numbers represent the basic truck model. The letter “M” designates a Mechanical drive and the letter “E” designates an Electrical propulsion system.
• The Product Identification Number (vehicle serial number) contains information which will identify the original manufacturing bill of material for this unit. This complete number will be necessary for proper ordering of many service parts and/or warranty consideration.
• The Gross Vehicle Weight (GVW) is what determines the load on the drive train, frame, tires, and other components. The vehicle design and application guidelines are sensitive to the total maximum Gross Vehicle Weight (GVW) and this means the total weight: the Empty Vehicle Weight + the fuel/lubricants + the payload.

Table Of Contents:

Komatsu 210M Dump Truck Operation & Maintenance Manual BFA40A BR 23858 24352

MAIN MENU.................................... 0
COVER PAGE................................... 1
FOREWORD..................................... 5
TABLE OF CONTENTS............................ 7
COMPONENTS DESCRIPTION AND SPECIFICATIONS.... 9
GENERAL SAFETY...............................13
WARNINGS AND CAUTIONS........................19
OPERATOR CONTROLS AND EQUIPMENT..............25
INSTRUMENTS AND INDICATORS...................33
OPERATING INSTRUCTIONS.......................47
LUBRICATION AND SERVICE......................57

Screenshot Of the Manual: