Komatsu D155AX-8 Bulldozer Shop Manual SEN06497-15 – PDF DOWNLOAD

Komatsu D155AX-8 Bulldozer Shop Manual SEN06497-15 – PDF DOWNLOAD

FILE DETAILS:

Komatsu D155AX-8 Bulldozer Shop Manual SEN06497-15 – PDF DOWNLOAD

Language : English
Pages : 3500
Downloadable : Yes
File Type : PDF
Size: 84.2 MB

DESCRIPTION:

Komatsu D155AX-8 Bulldozer Shop Manual SEN06497-15 – PDF DOWNLOAD

SERIAL NUMBERS 100001 and up

FOREWORD, SAFETY, BASIC INFORMATION
HOW TO READ THE SHOP MANUAL
• Some of the attachments and options described in this shop manual may not be available in some areas. If
they are required, consult your Komatsu distributor.
• The materials and specifications are subject to change without notice.
• Shop Manuals are available for “machine part” and “engine part”. For the engine unit, see the shop manual
for the machine which has the same engine model.
• Actual machine may differ from the images which are contained in this manual. A typical model is shown in
the illustrations of this shop manual.
Composition of the shop manual
This shop manual contains technical information necessary to perform services in workshops. It is divided into
the following chapters for the ease of use.
00 INDEX AND FOREWORD
This section describes the index, foreword, safety, and basic information.
01 SPECIFICATIONS
This section describes the specifications of the machine.
10 STRUCTURE AND FUNCTION
This section describes the structure and operation of each component with respect to each system. “STRUCTURE
AND FUNCTION” is helpful in not only understanding the structure of each component but performing
troubleshooting.
20 STANDARD VALUE TABLE
This section describes the standard values for new machine and failure criteria for testing and adjusting, and
troubleshooting. Use the standard values table to check the standard values for testing and adjusting, and judge
troubles in troubleshooting.
30 TESTING AND ADJUSTING
This section describes the measuring tools and measuring methods for testing and adjusting as well as the adjusting
method of each part. The standard values and repair limit for TESTING AND ADJUSTING are described
in “STANDARD VALUE TABLE”.
40 TROUBLESHOOTING
This section describes troubleshooting of failure part and its remedy method on the occurrence of the failure.
Descriptions of troubleshooting are sorted by failure mode.
50 DISASSEMBLY AND ASSEMBLY
This section describes the special tools, work procedures, and safety precautions necessary for removal, installation,
disassembly, and assembly of the components and parts. In addition, tightening torques, quantity, and
weight of the coating materials, lubricants, and coolant necessary to these works are shown.
60 MAINTENANCE STANDARD
This section describes the maintenance standard value of each component. The maintenance standard shows
the criteria and remedies for disassembly and assembly.
80 THE OTHER INFORMATION
This section describes the structure and function, testing and adjusting, and troubleshooting for all of the other
components or equipment which cannot be separately classified in the appendix.
90 Circuit diagrams
This section describes hydraulic circuit diagrams and electrical circuit diagrams.

General precautions
If the machine is handled incorrectly, it is dangerous. Read and understand what is described in the
operation and maintenance manual before operation. Read and understand what is described in this
manual before operation.
• Read and understand the meaning of all the safety labels stuck to the machine before performing any
greasing or repairs. For the locations of the safety labels and detailed explanation of precautions, see Operation
and Maintenance Manual.
• Tools and removed parts in the workshop should be well organized. Always keep the tools and parts in their
correct places. Always keep the work area clean and make sure that there is no dust, dirt, oil, or water on
the floor. Smoke only in the designated areas. Never smoke while working.
• Keep all tools in good condition, learn the correct way to use them, and use the proper ones. Check the
tools, machine, forklift truck, service car, etc. thoroughly before starting the work.
• Always wear safety shoes and helmet when performing
any operation. Do not wear loose clothes, or clothes with
buttons missing.
• Always wear the protective eyeglasses when hitting parts
with a hammer.
• Always wear the protective eyeglasses when grinding
parts with a grinder, etc.
• When performing any operation with multiple workers, always
agree on the operating procedure before starting. Be
clear in verbal communication, and observe hand signals.
Hang “UNDER REPAIR” warning tag in the operator’s
compartment Before starting work.
• Work and operation which require license or qualification
should be performed by qualified workers.
• Welding repairs should be performed by trained and experienced welders. When performing welding work,
always wear welding gloves, apron, welding goggles, cap and other clothes suited for welding work.
• Warm up before starting the work with exercise which increases alertness and the range of motion in order
to prevent injury.
• Avoid prolonged work, and take a rest at times to keep up a good condition. Take a rest at designated safe
area.
Precautions for preparatory work:
• Place the machine on a firm and level ground, and apply the parking brake and chock the wheels or tracks
to prevent the machine from moving before adding oil or making any repairs.
• Lower the work equipment (blade, ripper, bucket, etc.) to the ground before starting work. If this is not possible,
insert the lock pin or use blocks to prevent the work equipment from falling. In addition, be sure to
lock all the control levers and hang “UNDER REPAIR” warning tag on them.
• When performing the disassembling or assembling work, support the machine securely with blocks, jacks,
or stands before starting the work.
• Remove all mud and oil from the steps or other places for going up and down on the machine. Always use the handrails, ladders or steps when for going up and down on the machine. Never jump on or off the machine. When the scaffold is not provided, use steps or stepladder to secure your footing. Do not use handrails, ladders, or steps if they are damaged or deformed. Repair it or replace it immediately.

TABLE OF CONTENTS:

Komatsu D155AX-8 Bulldozer Shop Manual SEN06497-15 – PDF DOWNLOAD

INDEX
00 INDEX AND FOREWORD 00-1
ABBREVIATION LIST 00-21
FOREWORD, SAFETY, BASIC INFORMATION 00-27
HOW TO READ THE SHOP MANUAL 00-27
SAFETY NOTICE FOR OPERATION 00-29
PRECAUTIONS TO PREVENT FIRE 00-37
ACTIONS IF FIRE OCCURS 00-39
PRECAUTIONS FOR DISPOSING OF WASTE MATERIALS 00-40
ACTIONS TAKEN TO MEET EXHAUST GAS REGULATIONS 00-41
PRECAUTIONS FOR DEF 00-42
STORE AdBlue/DEF 00-43
PRECAUTIONS FOR HANDLING HYDRAULIC EQUIPMENT 00-44
PRECAUTIONS FOR DISCONNECTION AND CONNECTION OF PIPINGS 00-47
PRECAUTIONS FOR HANDLING ELECTRICAL EQUIPMENT 00-54
PRECAUTIONS FOR HANDLING FUEL SYSTEM EQUIPMENT 00-56
PRECAUTIONS FOR HANDLING INTAKE SYSTEM EQUIPMENT 00-57
PRACTICAL USE OF KOMTRAX 00-58
DISCONNECT AND CONNECT PUSH-PULL TYPE COUPLER 00-59
PRECAUTIONS FOR DISCONNECTION AND CONNECTION OF CONNECTORS 00-63
METHOD FOR DISCONNECTING AND CONNECTING DEUTSCH CONNECTOR 00-67
METHOD FOR DISCONNECTING AND CONNECTING SLIDE LOCK TYPE CONNECTOR 00-68
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR WITH LOCK TO PULL 00-70
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR WITH LOCK TO PUSH 00-71
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR WITH HOUSING TO ROTATE
00-73
HOW TO READ ELECTRICAL WIRE CODE 00-74
EXPLANATION OF TERMS FOR MAINTENANCE STANDARD 00-78
STANDARD TIGHTENING TORQUE TABLE 00-81
CONVERSION TABLE 00-88
01 SPECIFICATIONS 01-1
CONTENTS 01-2
ABBREVIATION LIST 01-3
SPECIFICATIONS 01-9
SPECIFICATION DRAWING 01-9
SPECIFICATIONS 01-12
WEIGHT TABLE 01-24
TABLE OF FUEL, COOLANT, AND LUBRICANTS 01-29
10 STRUCTURE AND FUNCTION 10-1
CONTENTS 10-2
ABBREVIATION LIST 10-5
UREA SCR SYSTEM 10-11
LAYOUT DRAWING OF UREA SCR SYSTEM 10-11
UREA SCR SYSTEM DIAGRAM 10-13
FUNCTION OF UREA SCR SYSTEM 10-14
COMPONENT PARTS OF UREA SCR SYSTEM 10-31
BOOT-UP SYSTEM 10-40
SYSTEM OPERATING LAMP SYSTEM 10-40
BATTERY DISCONNECT SWITCH 10-42
ENGINE SYSTEM 10-44
LAYOUT DRAWING OF ENGINE SYSTEM 10-44
ENGINE CONTROL SYSTEM 10-46
AUTOMATIC IDLE STOP SYSTEM 10-49
COMPONENT PARTS OF ENGINE SYSTEM 10-52
COOLING SYSTEM 10-72
LAYOUT DRAWING OF COOLING SYSTEM 10-72
COMPONENT PARTS OF COOLING SYSTEM 10-74
INDEX 00 INDEX AND FOREWORD
00-2 D155AX-8
CONTROL SYSTEM 10-90
LAYOUT DRAWING OF CONTROL SYSTEM 10-90
MACHINE MONITOR SYSTEM 10-91
KOMTRAX SYSTEM 10-94
COMPONENT PARTS OF CONTROL SYSTEM 10-95
HYDRAULIC SYSTEM 10-128
LAYOUT DRAWING OF HYDRAULIC SYSTEM 10-128
CLSS 10-129
COMPONENT PARTS OF HYDRAULIC SYSTEM 10-132
POWER TRAIN SYSTEM 10-195
LAYOUT OF POWER TRAIN SYSTEM 10-195
OPERATION OF POWER TRAIN SYSTEM 10-198
LAYOUT OF POWER TRAIN SYSTEM (D155PX-8) 10-200
OPERATION OF POWER TRAIN SYSTEM (D155PX-8) 10-203
TRANSMISSION, STEERING, AND BRAKE CONTROL 10-204
PALM COMMAND CONTROL SYSTEM 10-207
HSS SYSTEM 10-211
CENTRALIZED PRESSURE PICKUP PORT 10-214
COMPONENT PARTS OF POWER TRAIN SYSTEM 10-216
WORK EQUIPMENT SYSTEM 10-299
WORK EQUIPMENT CONTROL 10-299
LAYOUT DRAWING OF FRONT WORK EQUIPMENT 10-301
LAYOUT OF VARIABLE GIANT RIPPER 10-302
LAYOUT OF VARIABLE MULTI-SHANK RIPPER 10-303
COMPONENT PARTS OF WORK EQUIPMENT SYSTEM 10-304
UNDERCARRIAGE AND FRAME 10-321
MAIN FRAME 10-321
SUSPENSION 10-322
TRACK FRAME AND IDLER CUSHION 10-325
WORK EQUIPMENT 10-327
STRUCTURE OF FRONT WORK EQUIPMENT 10-327
STRUCTURE OF CYLINDER STAY 10-329
STRUCTURE OF VARIABLE GIANT RIPPER 10-330
STRUCTURE OF VARIABLE MULTI-SHANK RIPPER 10-331
CAB AND ITS ATTACHMENTS 10-332
ROPS CAB 10-332
CAB MOUNT 10-333
20 STANDARD VALUE TABLE 20-1
CONTENTS 20-2
ABBREVIATION LIST 20-3
STANDARD VALUE TABLE FOR ENGINE 20-9
STANDARD VALUE TABLE FOR ENGINE: D155AX-8 20-9
STANDARD VALUE TABLE FOR ENGINE: D155PX-8 20-14
STANDARD VALUE TABLE FOR MACHINE 20-19
STANDARD VALUE TABLE FOR MACHINE: D155AX-8 20-19
STANDARD VALUE TABLE FOR MACHINE: D155PX-8 20-37
MACHINE POSTURE AND PROCEDURE FOR MEASURING PERFORMANCE 20-53
STANDARD VALUE TABLE FOR ELECTRICAL 20-55
STANDARD VALUE TABLE FOR ELECTRICITY 20-55
30 TESTING AND ADJUSTING 30-1
CONTENTS 30-2
ABBREVIATION LIST 30-5
RELATED INFORMATION ON TESTING AND ADJUSTING 30-11
TOOLS FOR TESTING AND ADJUSTING 30-11
SKETCH OF TOOLS FOR TESTING AND ADJUSTING 30-19
ENGINE AND COOLING SYSTEM 30-22
TEST ENGINE SPEED 30-22
TEST BOOST PRESSURE 30-27
00 INDEX AND FOREWORD INDEX
D155AX-8 00-3
TEST EXHAUST GAS TEMPERATURE 30-29
TEST EXHAUST GAS COLOR 30-32
TEST AND ADJUST VALVE CLEARANCE 30-34
TEST COMPRESSION PRESSURE 30-37
TEST BLOWBY PRESSURE 30-40
TEST ENGINE OIL PRESSURE 30-42
TEST EGR VALVE AND VGT OIL PRESSURE 30-44
TEST FUEL PRESSURE 30-46
TEST FUEL RETURN RATE AND LEAKAGE 30-48
BLEED AIR FROM FUEL SYSTEM 30-53
TEST FUEL CIRCUIT FOR LEAKAGE 30-55
HANDLE CYLINDER CUT-OUT MODE OPERATION 30-57
HANDLE NO-INJECTION CRANKING OPERATION 30-58
CLEAN FUEL DOSER 30-59
WRITE INJECTOR COMPENSATION VALUE TO ENGINE CONTROLLER 30-63
WRITE ASH IN SOOT ACCUMULATION CORRECTION TO ENGINE CONTROLLER 30-69
TEST SCR RELATED FUNCTIONS 30-70
CLEAN AdBlue/DEF TANK 30-97
ADJUST DECELERATOR PEDAL 30-103
POWER TRAIN 30-106
TEST POWER TRAIN OIL PRESSURE 30-106
ADJUST TRANSMISSION OUTPUT SHAFT SPEED SENSOR 30-117
TEST BRAKE PERFORMANCE SIMPLY 30-118
TEST AND ADJUST BRAKE PEDAL 30-119
ADJUST PARKING BRAKE LEVER 30-123
MOVE MACHINE BY RELEASING PARKING BRAKE WHEN MACHINE DOES NOT TRAVEL 30-125
UNDERCARRIAGE AND FRAME 30-129
ADJUST IDLER CLEARANCE 30-129
TEST AND ADJUST TRACK TENSION 30-133
HYDRAULIC SYSTEM 30-136
RELEASE REMAINING PRESSURE FROM HYDRAULIC SYSTEM 30-136
TEST AND ADJUST WORK EQUIPMENT AND HSS OIL PRESSURES 30-137
TEST OIL PRESSURE OF CONTROL CIRCUIT 30-142
TEST WORK EQUIPMENT LOCK SOLENOID VALVE OUTPUT PRESSURE 30-144
TEST RIPPER PIN PULLER SOLENOID VALVE OUTPUT PRESSURE 30-146
BLEED AIR FROM WORK EQUIPMENT AND HSS PUMP 30-148
TEST COOLING FAN SPEED 30-149
TEST COOLING FAN CIRCUIT OIL PRESSURE 30-150
BLEED AIR FROM COOLING FAN PUMP 30-152
TEST THE PARTS CAUSING HYDRAULIC DRIFT IN WORK EQUIPMENT 30-153
>TEST INTERNAL OIL LEAKAGE OF WORK EQUIPMENT CYLINDER 30-155
BLEED AIR FROM WORK EQUIPMENT CYLINDERS 30-157
OPERATION WHEN WORK EQUIPMENT IS NOT EFFECTIVE 30-158
WORK EQUIPMENT 30-160
ADJUST WORK EQUIPMENT LOCK LEVER 30-160
TEST AND ADJUST PLAY OF BLADE ELECTRIC LEVER 30-162
CAB AND ITS ATTACHMENTS 30-172
TEST AND ADJUST OPERATOR’S CAB 30-172
ELECTRICAL SYSTEM 30-177
SET AND OPERATE MACHINE MONITOR 30-177
METHOD FOR STARTING UP KOMTRAX TERMINAL 30-303
ADJUST REARVIEW CAMERA ANGLE 30-308
HANDLE VOLTAGE CIRCUIT OF ENGINE CONTROLLER 30-309
HANDLE BATTERY DISCONNECT SWITCH 30-310
TEST DIODES 30-311
Pm CLINIC 30-312
Pm CLINIC SERVICE 30-312
40 TROUBLESHOOTING 40-1
INDEX 00 INDEX AND FOREWORD
00-4 D155AX-8
CONTENTS 40-2
ABBREVIATION LIST 40-14
RELATED INFORMATION ON TROUBLESHOOTING 40-20
GENERAL TROUBLESHOOTING POINTS 40-20
TROUBLESHOOTING POINTS FOR UREA SCR SYSTEM 40-21
SEQUENCE OF EVENTS IN TROUBLESHOOTING 40-33
CHECKS BEFORE TROUBLESHOOTING 40-35
INSPECTION PROCEDURE BEFORE TROUBLESHOOTING 40-37
TESTING IN ACCORDANCE WITH TESTING PROCEDURE 40-39
PROCEDURE FOR TESTING AND TROUBLESHOOTING 40-64
SYMPTOM AND TROUBLESHOOTING NUMBERS 40-67
INFORMATION DESCRIBED IN TROUBLESHOOTING TABLE 40-70
CONNECTORS LIST AND LAYOUT 40-72
CONNECTOR CONTACT IDENTIFICATION 40-88
T-BRANCH BOX AND T-BRANCH ADAPTER TABLE 40-128
FUSE LOCATION TABLE 40-134
PRECAUTIONS FOR CLEANING AND REPLACING KDPF (KCSF and KDOC) 40-137
PREPARATION OF SHORT CIRCUIT ELECTRICAL CONNECTOR (FOR FAILURE CODES [CA1883]
AND [CA3135]) 40-141
FAILURE CODES TABLE 40-143
TROUBLESHOOTING BY FAILURE CODE (DISPLAY OF CODE) 40-165
FAILURE CODE [1500L0] 40-165
FAILURE CODE [15SAL1] 40-166
FAILURE CODE [15SALH] 40-168
FAILURE CODE [15SBL1] 40-170
FAILURE CODE [15SBLH] 40-172
FAILURE CODE [15SEL1] 40-174
FAILURE CODE [15SELH] 40-176
FAILURE CODE [15SFL1] 40-178
FAILURE CODE [15SFLH] 40-180
FAILURE CODE [15SGL1] 40-182
FAILURE CODE [15SGLH] 40-184
FAILURE CODE [15SJL1] 40-186
FAILURE CODE [15SJLH] 40-188
FAILURE CODE [1800MW] 40-190
FAILURE CODE [2300NR] 40-191
FAILURE CODE [2301L1] 40-192
FAILURE CODE [2301LH] 40-194
FAILURE CODE [2302L1] 40-196
FAILURE CODE [2302LH] 40-198
FAILURE CODE [879AKA] 40-200
FAILURE CODE [879AKB] 40-201
FAILURE CODE [879BKA] 40-202
FAILURE CODE [879BKB] 40-204
FAILURE CODE [879CKA] 40-206
FAILURE CODE [879CKB] 40-207
FAILURE CODE [879DKZ] 40-208
FAILURE CODE [879EMC] 40-210
FAILURE CODE [879FMC] 40-211
FAILURE CODE [879GKX] 40-212
FAILURE CODE [989L00] 40-214
FAILURE CODE [989M00] 40-215
FAILURE CODE [989N00] 40-216
FAILURE CODE [A1U0N3] 40-217
FAILURE CODE [A1U0N4] 40-219
FAILURE CODE [AA10NX] 40-221
FAILURE CODE [AB00KE] 40-223
FAILURE CODE [AQ10N3] 40-225
00 INDEX AND FOREWORD INDEX
D155AX-8 00-5
FAILURE CODE [AS00N3] 40-227
FAILURE CODE [AS00R2] 40-229
FAILURE CODE [AS00R3] 40-230
FAILURE CODE [AS00R4] 40-231
FAILURE CODE [AS00R5] 40-232
FAILURE CODE [AS00R6] 40-233
FAILURE CODE [AS00ZK] 40-234
FAILURE CODE [AS10KM] 40-235
FAILURE CODE [AS10NR] 40-236
FAILURE CODE [AS10NT] 40-237
FAILURE CODE [B@BAZG] 40-238
FAILURE CODE [B@BCNS] 40-239
FAILURE CODE [B@BCZK] 40-240
FAILURE CODE [B@CENS] 40-242
FAILURE CODE [B@HANS] 40-243
FAILURE CODE [CA115] 40-244
FAILURE CODE [CA122] 40-245
FAILURE CODE [CA123] 40-247
FAILURE CODE [CA131] 40-249
FAILURE CODE [CA132] 40-251
FAILURE CODE [CA135] 40-253
FAILURE CODE [CA141] 40-255
FAILURE CODE [CA144] 40-257
FAILURE CODE [CA145] 40-259
FAILURE CODE [CA153] 40-261
FAILURE CODE [CA154] 40-264
FAILURE CODE [CA187] 40-267
FAILURE CODE [CA221] 40-269
FAILURE CODE [CA222] 40-271
FAILURE CODE [CA227] 40-273
FAILURE CODE [CA234] 40-274
FAILURE CODE [CA238] 40-275
FAILURE CODE [CA239] 40-277
FAILURE CODE [CA249] 40-279
FAILURE CODE [CA256] 40-281
FAILURE CODE [CA271] 40-283
FAILURE CODE [CA272] 40-285
FAILURE CODE [CA273] 40-286
FAILURE CODE [CA274] 40-288
FAILURE CODE [CA322] 40-289
FAILURE CODE [CA323] 40-291
FAILURE CODE [CA324] 40-293
FAILURE CODE [CA325] 40-295
FAILURE CODE [CA331] 40-297
FAILURE CODE [CA332] 40-299
FAILURE CODE [CA343] 40-301
FAILURE CODE [CA351] 40-302
FAILURE CODE [CA352] 40-303
FAILURE CODE [CA356] 40-306
FAILURE CODE [CA357] 40-308
FAILURE CODE [CA386] 40-311
FAILURE CODE [CA441] 40-312
FAILURE CODE [CA442] 40-315
FAILURE CODE [CA449] 40-316
FAILURE CODE [CA451] 40-317
FAILURE CODE [CA452] 40-319
FAILURE CODE [CA515] 40-321
FAILURE CODE [CA516] 40-323
INDEX 00 INDEX AND FOREWORD
00-6 D155AX-8
FAILURE CODE [CA553] 40-325
FAILURE CODE [CA555] 40-326
FAILURE CODE [CA556] 40-327
FAILURE CODE [CA559] 40-328
FAILURE CODE [CA595] 40-333
FAILURE CODE [CA687] 40-334
FAILURE CODE [CA689] 40-336
FAILURE CODE [CA691] 40-338
FAILURE CODE [CA692] 40-340
FAILURE CODE [CA697] 40-342
FAILURE CODE [CA698] 40-343
FAILURE CODE [CA731] 40-344
FAILURE CODE [CA778] 40-345
FAILURE CODE [CA1117] 40-348
FAILURE CODE [CA1664] 40-349
FAILURE CODE [CA1669] 40-352
FAILURE CODE [CA1673] 40-353
FAILURE CODE [CA1677] 40-354
FAILURE CODE [CA1678] 40-355
FAILURE CODE [CA1682] 40-356
FAILURE CODE [CA1683] 40-358
FAILURE CODE [CA1684] 40-360
FAILURE CODE [CA1686] 40-362
FAILURE CODE [CA1691] 40-363
FAILURE CODE [CA1694] 40-366
FAILURE CODE [CA1695] 40-368
FAILURE CODE [CA1696] 40-369
FAILURE CODE [CA1712] 40-371
FAILURE CODE [CA1713] 40-374
FAILURE CODE [CA1714] 40-376
FAILURE CODE [CA1715] 40-377
FAILURE CODE [CA1776] 40-378
FAILURE CODE [CA1777] 40-381
FAILURE CODE [CA1843] 40-384
FAILURE CODE [CA1844] 40-386
FAILURE CODE [CA1879] 40-389
FAILURE CODE [CA1881] 40-392
FAILURE CODE [CA1883] 40-394
FAILURE CODE [CA1885] 40-398
FAILURE CODE [CA1887] 40-400
FAILURE CODE [CA1921] 40-402
FAILURE CODE [CA1922] 40-405
FAILURE CODE [CA1923] 40-410
FAILURE CODE [CA1924] 40-412
FAILURE CODE [CA1925] 40-414
FAILURE CODE [CA1927] 40-416
FAILURE CODE [CA1928] 40-418
FAILURE CODE [CA1942] 40-420
FAILURE CODE [CA1963] 40-421
FAILURE CODE [CA1977] 40-424
FAILURE CODE [CA1993] 40-427
FAILURE CODE [CA2185] 40-430
FAILURE CODE [CA2186] 40-432
FAILURE CODE [CA2249] 40-434
FAILURE CODE [CA2265] 40-435
FAILURE CODE [CA2266] 40-437
FAILURE CODE [CA2271] 40-440
FAILURE CODE [CA2272] 40-442
00 INDEX AND FOREWORD INDEX
D155AX-8 00-7
FAILURE CODE [CA2349] 40-444
FAILURE CODE [CA2353] 40-446
FAILURE CODE [CA2357] 40-448
FAILURE CODE [CA2381] 40-449
FAILURE CODE [CA2382] 40-451
FAILURE CODE [CA2383] 40-453
FAILURE CODE [CA2386] 40-455
FAILURE CODE [CA2387] 40-457
FAILURE CODE [CA2555] 40-458
FAILURE CODE [CA2556] 40-461
FAILURE CODE [CA2637] 40-463
FAILURE CODE [CA2639] 40-465
FAILURE CODE [CA2732] 40-468
FAILURE CODE [CA2733] 40-470
FAILURE CODE [CA2741] 40-472
FAILURE CODE [CA2765] 40-473
FAILURE CODE [CA2771] 40-474
FAILURE CODE [CA2777] 40-480
FAILURE CODE [CA2878] 40-483
FAILURE CODE [CA2881] 40-486
FAILURE CODE [CA2976] 40-489
FAILURE CODE [CA3133] 40-491
FAILURE CODE [CA3134] 40-493
FAILURE CODE [CA3135] 40-495
FAILURE CODE [CA3142] 40-499
FAILURE CODE [CA3143] 40-500
FAILURE CODE [CA3144] 40-501
FAILURE CODE [CA3146] 40-503
FAILURE CODE [CA3147] 40-504
FAILURE CODE [CA3148] 40-505
FAILURE CODE [CA3151] 40-507
FAILURE CODE [CA3165] 40-513
FAILURE CODE [CA3167] 40-515
FAILURE CODE [CA3229] 40-518
FAILURE CODE [CA3231] 40-520
FAILURE CODE [CA3232] 40-522
FAILURE CODE [CA3235] 40-526
FAILURE CODE [CA3239] 40-528
FAILURE CODE [CA3241] 40-531
FAILURE CODE [CA3242] 40-534
FAILURE CODE [CA3251] 40-537
FAILURE CODE [CA3253] 40-540
FAILURE CODE [CA3254] 40-544
FAILURE CODE [CA3255] 40-547
FAILURE CODE [CA3256] 40-551
FAILURE CODE [CA3311] 40-553
FAILURE CODE [CA3312] 40-555
FAILURE CODE [CA3313] 40-558
FAILURE CODE [CA3314] 40-559
FAILURE CODE [CA3315] 40-560
FAILURE CODE [CA3316] 40-563
FAILURE CODE [CA3317] 40-564
FAILURE CODE [CA3318] 40-565
FAILURE CODE [CA3319] 40-568
FAILURE CODE [CA3321] 40-569
FAILURE CODE [CA3322] 40-571
FAILURE CODE [CA3419] 40-574
FAILURE CODE [CA3421] 40-576
INDEX 00 INDEX AND FOREWORD
00-8 D155AX-8
FAILURE CODE [CA3497] 40-578
FAILURE CODE [CA3498] 40-579
FAILURE CODE [CA3543] 40-580
FAILURE CODE [CA3545] 40-587
FAILURE CODE [CA3547] 40-589
FAILURE CODE [CA3558] 40-590
FAILURE CODE [CA3559] 40-592
FAILURE CODE [CA3562] 40-594
FAILURE CODE [CA3563] 40-596
FAILURE CODE [CA3567] 40-599
FAILURE CODE [CA3568] 40-602
FAILURE CODE [CA3571] 40-606
FAILURE CODE [CA3572] 40-608
FAILURE CODE [CA3574] 40-610
FAILURE CODE [CA3575] 40-612
FAILURE CODE [CA3577] 40-614
FAILURE CODE [CA3578] 40-616
FAILURE CODE [CA3582] 40-618
FAILURE CODE [CA3583] 40-625
FAILURE CODE [CA3596] 40-627
FAILURE CODE [CA3649] 40-629
FAILURE CODE [CA3681] 40-631
FAILURE CODE [CA3682] 40-636
FAILURE CODE [CA3713] 40-642
FAILURE CODE [CA3717] 40-645
FAILURE CODE [CA3718] 40-646
FAILURE CODE [CA3725] 40-647
FAILURE CODE [CA3748] 40-650
FAILURE CODE [CA3751] 40-653
FAILURE CODE [CA3755] 40-655
FAILURE CODE [CA3866] 40-657
FAILURE CODE [CA3867] 40-661
FAILURE CODE [CA3868] 40-664
FAILURE CODE [CA3899] 40-668
FAILURE CODE [CA3911] 40-670
FAILURE CODE [CA3912] 40-674
FAILURE CODE [CA3932] 40-676
FAILURE CODE [CA3933] 40-678
FAILURE CODE [CA3934] 40-680
FAILURE CODE [CA3935] 40-683
FAILURE CODE [CA3936] 40-685
FAILURE CODE [CA4151] 40-687
FAILURE CODE [CA4152] 40-691
FAILURE CODE [CA4155] 40-695
FAILURE CODE [CA4156] 40-697
FAILURE CODE [CA4157] 40-700
FAILURE CODE [CA4158] 40-702
FAILURE CODE [CA4159] 40-703
FAILURE CODE [CA4161] 40-704
FAILURE CODE [CA4162] 40-707
FAILURE CODE [CA4163] 40-710
FAILURE CODE [CA4164] 40-712
FAILURE CODE [CA4165] 40-714
FAILURE CODE [CA4166] 40-716
FAILURE CODE [CA4168] 40-718
FAILURE CODE [CA4169] 40-721
FAILURE CODE [CA4171] 40-723
FAILURE CODE [CA4249] 40-726
00 INDEX AND FOREWORD INDEX
D155AX-8 00-9
FAILURE CODE [CA4251] 40-728
FAILURE CODE [CA4259] 40-730
FAILURE CODE [CA4261] 40-733
FAILURE CODE [CA4277] 40-736
FAILURE CODE [CA4281] 40-740
FAILURE CODE [CA4459] 40-744
FAILURE CODE [CA4461] 40-747
FAILURE CODE [CA4658] 40-750
FAILURE CODE [CA4731] 40-754
FAILURE CODE [CA4732] 40-755
FAILURE CODE [CA4739] 40-756
FAILURE CODE [CA4768] 40-757
FAILURE CODE [CA4769] 40-759
FAILURE CODE [CA4842] 40-762
FAILURE CODE [CA4952] 40-766
FAILURE CODE [CA5115] 40-768
FAILURE CODE [CA5383] 40-771
FAILURE CODE [D130KA] 40-773
FAILURE CODE [D130KB] 40-776
FAILURE CODE [D190KA] 40-778
FAILURE CODE [D190KB] 40-780
FAILURE CODE [D19JKZ] 40-782
FAILURE CODE [D811MC] 40-785
FAILURE CODE [D862KA] 40-786
FAILURE CODE [D8ALKA] 40-787
FAILURE CODE [D8ALKB] 40-789
FAILURE CODE [D8AQKR] 40-792
FAILURE CODE [DAF0MB] 40-793
FAILURE CODE [DAF0MC] 40-794
FAILURE CODE [DAF8KB] 40-795
FAILURE CODE [DAF9KQ] 40-796
FAILURE CODE [DAFGMC] 40-797
FAILURE CODE [DAFLKA] 40-798
FAILURE CODE [DAFLKB] 40-800
FAILURE CODE [DAFQKR] 40-803
FAILURE CODE [DAZ9KQ] 40-804
FAILURE CODE [DAZQKR] 40-805
FAILURE CODE [DB2QKR] 40-806
FAILURE CODE [DB2RKR] 40-812
FAILURE CODE [DB90KT] 40-818
FAILURE CODE [DB90MC] 40-819
FAILURE CODE [DB91KK] 40-820
FAILURE CODE [DB92KK] 40-823
FAILURE CODE [DB95KK] 40-825
FAILURE CODE [DB97KK] 40-828
FAILURE CODE [DB99KQ] 40-830
FAILURE CODE [DB9LKA] 40-832
FAILURE CODE [DB9LKB] 40-834
FAILURE CODE [DB9QKR] 40-836
FAILURE CODE [DB9RKR] 40-837
FAILURE CODE [DBE0KT] 40-839
FAILURE CODE [DBE0MC] 40-840
FAILURE CODE [DBE1KK] 40-841
FAILURE CODE [DBE2KK] 40-844
FAILURE CODE [DBE5KK] 40-847
FAILURE CODE [DBE6KK] 40-849
FAILURE CODE [DBE9KQ] 40-851
FAILURE CODE [DBELKA] 40-852
INDEX 00 INDEX AND FOREWORD
00-10 D155AX-8
FAILURE CODE [DBELKB] 40-854
FAILURE CODE [DBEQKR] 40-856
FAILURE CODE [DBERKR] 40-857
FAILURE CODE [DD12KA] 40-859
FAILURE CODE [DD12KB] 40-861
FAILURE CODE [DD13KA] 40-863
FAILURE CODE [DD13KB] 40-865
FAILURE CODE [DD14KA] 40-867
FAILURE CODE [DD14KB] 40-870
FAILURE CODE [DDDDKA] 40-872
FAILURE CODE [DDDDKB] 40-875
FAILURE CODE [DDDDKX] 40-878
FAILURE CODE [DDKAKA] 40-879
FAILURE CODE [DDKAKB] 40-881
FAILURE CODE [DDKBKA] 40-883
FAILURE CODE [DDKBKB] 40-885
FAILURE CODE [DDKCL4] 40-887
FAILURE CODE [DDKEL4] 40-890
FAILURE CODE [DDN7L4] 40-893
FAILURE CODE [DDN8L4] 40-896
FAILURE CODE [DDNLKA] 40-899
FAILURE CODE [DDNLKB] 40-901
FAILURE CODE [DDTSL1] 40-903
FAILURE CODE [DDTSLH] 40-905
FAILURE CODE [DFA4KX] 40-907
FAILURE CODE [DFA4KZ] 40-908
FAILURE CODE [DFA4L8] 40-909
FAILURE CODE [DFA5KA] 40-910
FAILURE CODE [DFA5KY] 40-913
FAILURE CODE [DFA6KA] 40-915
FAILURE CODE [DFA6KY] 40-918
FAILURE CODE [DFA7KX] 40-920
FAILURE CODE [DFA7KZ] 40-921
FAILURE CODE [DFA7L8] 40-922
FAILURE CODE [DFA8KA] 40-923
FAILURE CODE [DFA8KY] 40-926
FAILURE CODE [DFA9KA] 40-928
FAILURE CODE [DFA9KY] 40-931
FAILURE CODE [DFAAKX] 40-933
FAILURE CODE [DFAAKZ] 40-934
FAILURE CODE [DFAAL8] 40-935
FAILURE CODE [DFABKA] 40-936
FAILURE CODE [DFABKY] 40-939
FAILURE CODE [DFACKA] 40-941
FAILURE CODE [DFACKY] 40-944
FAILURE CODE [DGS1KA] 40-946
FAILURE CODE [DGS1KX] 40-948
FAILURE CODE [DGT1KA] 40-950
FAILURE CODE [DGT1KX] 40-953
FAILURE CODE [DH21KA] 40-955
FAILURE CODE [DH21KY] 40-958
FAILURE CODE [DHA4KA] 40-960
FAILURE CODE [DHAAMA] 40-962
FAILURE CODE [DHACMA] 40-964
FAILURE CODE [DHT5KA] 40-966
FAILURE CODE [DHT5KY] 40-969
FAILURE CODE [DHT7KA] 40-971
FAILURE CODE [DHT7KY] 40-974
00 INDEX AND FOREWORD INDEX
D155AX-8 00-11
FAILURE CODE [DK10KA] 40-976
FAILURE CODE [DK10KB] 40-979
FAILURE CODE [DK30KA] 40-981
FAILURE CODE [DK30KX] 40-984
FAILURE CODE [DK30KY] 40-985
FAILURE CODE [DK30KZ] 40-987
FAILURE CODE [DK30L8] 40-988
FAILURE CODE [DK31KA] 40-989
FAILURE CODE [DK31KY] 40-992
FAILURE CODE [DK40KA] 40-994
FAILURE CODE [DK40KY] 40-997
FAILURE CODE [DK55KX] 40-999
FAILURE CODE [DK55KZ] 40-1000
FAILURE CODE [DK55L8] 40-1001
FAILURE CODE [DK56KA] 40-1002
FAILURE CODE [DK56KY] 40-1005
FAILURE CODE [DK57KA] 40-1007
FAILURE CODE [DK57KY] 40-1010
FAILURE CODE [DKH1KA] 40-1012
FAILURE CODE [DKH1KY] 40-1015
FAILURE CODE [DLM3KA] 40-1017
FAILURE CODE [DLM3KB] 40-1019
FAILURE CODE [DLM3MB] 40-1020
FAILURE CODE [DLT3KA] 40-1021
FAILURE CODE [DLT3KB] 40-1023
FAILURE CODE [DR21KX] 40-1025
FAILURE CODE [DR31KX] 40-1026
FAILURE CODE [DV20KB] 40-1027
FAILURE CODE [DW7BKA] 40-1029
FAILURE CODE [DW7BKB] 40-1031
FAILURE CODE [DWN1KA] 40-1033
FAILURE CODE [DWN1KB] 40-1035
FAILURE CODE [DWN1KY] 40-1037
FAILURE CODE [DWN2KA] 40-1038
FAILURE CODE [DWN2KB] 40-1040
FAILURE CODE [DWN2KY] 40-1041
FAILURE CODE [DWN3KA] 40-1042
FAILURE CODE [DWN3KB] 40-1044
FAILURE CODE [DWN3KY] 40-1046
FAILURE CODE [DWN5KA] 40-1048
FAILURE CODE [DWN5KB] 40-1050
FAILURE CODE [DWN5KY] 40-1052
FAILURE CODE [DXA2KA] 40-1054
FAILURE CODE [DXA2KB] 40-1056
FAILURE CODE [DXA2KY] 40-1058
FAILURE CODE [DXH1KA] 40-1060
FAILURE CODE [DXH1KB] 40-1062
FAILURE CODE [DXH1KY] 40-1064
FAILURE CODE [DXH4KA] 40-1066
FAILURE CODE [DXH4KB] 40-1068
FAILURE CODE [DXH4KY] 40-1070
FAILURE CODE [DXH5KA] 40-1072
FAILURE CODE [DXH5KB] 40-1074
FAILURE CODE [DXH5KY] 40-1076
FAILURE CODE [DXH6KA] 40-1078
FAILURE CODE [DXH6KB] 40-1080
FAILURE CODE [DXH6KY] 40-1081
FAILURE CODE [DXH7KA] 40-1083
INDEX 00 INDEX AND FOREWORD
00-12 D155AX-8
FAILURE CODE [DXH7KB] 40-1085
FAILURE CODE [DXH7KY] 40-1087
FAILURE CODE [DXH8KA] 40-1089
FAILURE CODE [DXH8KB] 40-1091
FAILURE CODE [DXH8KY] 40-1093
FAILURE CODE [DXHBKA] 40-1095
FAILURE CODE [DXHBKB] 40-1097
FAILURE CODE [DXHBKY] 40-1099
FAILURE CODE [DXHCKA] 40-1101
FAILURE CODE [DXHCKB] 40-1103
FAILURE CODE [DXHCKY] 40-1105
FAILURE CODE [DXHRKA] 40-1107
FAILURE CODE [DXHRKB] 40-1109
FAILURE CODE [DXHRKY] 40-1110
FAILURE CODE [DXHSKA] 40-1112
FAILURE CODE [DXHSKB] 40-1114
FAILURE CODE [DXHSKY] 40-1115
FAILURE CODE [DXHTKA] 40-1117
FAILURE CODE [DXHTKB] 40-1119
FAILURE CODE [DXHTKY] 40-1121
FAILURE CODE [DXHUKA] 40-1123
FAILURE CODE [DXHUKB] 40-1125
FAILURE CODE [DXHUKY] 40-1127
FAILURE CODE [DXHWKA] 40-1129
FAILURE CODE [DXHWKB] 40-1131
FAILURE CODE [DXHWKY] 40-1132
FAILURE CODE [DXHXKA] 40-1134
FAILURE CODE [DXHXKB] 40-1136
FAILURE CODE [DXHXKY] 40-1137
FAILURE CODE [DXHYKA] 40-1139
FAILURE CODE [DXHYKB] 40-1141
FAILURE CODE [DXHYKY] 40-1142
FAILURE CODE [DXHZKA] 40-1144
FAILURE CODE [DXHZKB] 40-1146
FAILURE CODE [DXHZKY] 40-1147
FAILURE CODE [DXJ4KA] 40-1149
FAILURE CODE [DXJ4KB] 40-1151
FAILURE CODE [DXJ8KA] 40-1152
FAILURE CODE [DXJ8KB] 40-1154
FAILURE CODE [DXJ8KY] 40-1156
FAILURE CODE [DXJ9KA] 40-1158
FAILURE CODE [DXJ9KB] 40-1160
FAILURE CODE [DXJ9KY] 40-1162
FAILURE CODE [DXJAKA] 40-1164
FAILURE CODE [DXJAKB] 40-1166
FAILURE CODE [DXJAKY] 40-1168
FAILURE CODE [DXJBKA] 40-1170
FAILURE CODE [DXJBKB] 40-1172
FAILURE CODE [DXJBKY] 40-1174
TROUBLESHOOTING OF ELECTRICAL SYSTEM (E-MODE) 40-1176
E-1 ENGINE DOES NOT START (ENGINE DOES NOT CRANK) 40-1176
E-2 MANUAL PREHEATING SYSTEM DOES NOT WORK 40-1183
E-3 AUTOMATIC PREHEATING SYSTEM DOES NOT WORK 40-1186
E-4 WHILE PREHEATING IS WORKING, PREHEATING MONITOR DOES NOT LIGHT UP 40-1188
E-5 WHEN STARTING SWITCH IS TURNED TO ON POSITION, MACHINE MONITOR DISPLAYS
NOTHING 40-1190
E-6 WHILE STARTING SWITCH IS TURNED TO ON POSITION (WITH ENGINE STOPPED), RADIATOR
COOLANT LEVEL MONITOR LIGHTS UP IN YELLOW 40-1194
00 INDEX AND FOREWORD INDEX
D155AX-8 00-13
E-7 AIR CLEANER CLOGGING MONITOR LIGHTS UP IN YELLOW WHILE ENGINE IS RUNNING
40-1196
E-8 CHARGE LEVEL MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING 40-1197
E-9 ENGINE COOLANT TEMPERATURE MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING
40-1199
E-10 ENGINE OIL PRESSURE MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING 40-1200
E-11 POWER TRAIN OIL TEMPERATURE MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING
40-1201
E-12 HYDRAULIC OIL TEMPERATURE MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING
40-1202
E-13 ENGINE COOLANT TEMPERATURE GAUGE DOES NOT INDICATE CORRECT TEMPERATURE
40-1203
E-14 FUEL LEVEL GAUGE DOES NOT INDICATE CORRECT LEVEL 40-1204
E-15 POWER TRAIN OIL TEMPERATURE GAUGE DOES NOT INDICATE CORRECT TEMPERATURE
40-1206
E-16 HYDRAULIC OIL TEMPERATURE GAUGE DOES NOT INDICATE CORRECT TEMPERATURE
40-1207
E-17 OPERATION MODE DOES NOT CHANGE 40-1208
E-18 GEAR SHIFT MODE DOES NOT CHANGE 40-1209
E-19 OPERATING CUSTOMIZE SWITCH DOES NOT DISPLAY CUSTOMIZE SCREEN 40-1210
E-20 MODIFYING SETTING ON CUSTOMIZE SCREEN DOES NOT CHANGE SETTING OF MACHINE
40-1211
E-21 SOME AREAS OF MACHINE MONITOR SCREEN ARE NOT DISPLAYED 40-1212
E-22 ALARM BUZZER DOES NOT SOUND OR DOES NOT STOP SOUNDING 40-1213
E-23 SERVICE METER IS NOT DISPLAYED, WHILE STARTING SWITCH IS IN OFF POSITION
40-1214
E-24 SERVICE MODE CANNOT BE SELECTED 40-1215
E-25 HORN DOES NOT SOUND 40-1216
E-26 HORN DOES NOT STOP SOUNDING 40-1218
E-27 BACKUP ALARM DOES NOT SOUND 40-1219
E-28 BACKUP ALARM DOES NOT STOP SOUNDING 40-1220
E-29 HEADLAMP DOES NOT LIGHT UP 40-1221
E-30 REAR LAMP AND RIPPER POINT LAMP DO NOT LIGHT UP 40-1225
E-31 ALL WIPERS DO NOT OPERATE 40-1229
E-32 FRONT WIPER DOES NOT OPERATE 40-1234
E-33 REAR WIPER DOES NOT OPERATE 40-1238
E-34 LEFT DOOR WIPER DOES NOT OPERATE 40-1242
E-35 RIGHT DOOR WIPER DOES NOT OPERATE 40-1246
E-36 FUEL FEED PUMP DOES NOT OPERATE OR STOP AUTOMATICALLY 40-1250
E-37 FAN DOES NOT ROTATE IN REVERSE 40-1251
E-38 GEAR CANNOT BE SHIFTED 40-1252
E-39 FRONT WASHER DOES NOT OPERATE 40-1253
E-40 REAR WASHER DOES NOT OPERATE 40-1256
E-41 LEFT DOOR WASHER DOES NOT OPERATE 40-1259
E-42 RIGHT DOOR WASHER DOES NOT OPERATE 40-1262
E-43 RIPPER PIN PULLER DOES NOT WORK 40-1265
E-44 KOMTRAX SYSTEM DOES NOT OPERATE NORMALLY 40-1267
TROUBLESHOOTING FOR HYDRAULIC AND MECHANICAL SYSTEMS (H MODE) 40-1268
INFORMATION MENTIONED IN TROUBLESHOOTING TABLE (H MODE) 40-1268
SYSTEM CHART OF HYDRAULIC AND MECHANICAL SYSTEMS 40-1269
FAILURE MODE AND CAUSE TABLE 40-1273
H-1 MACHINE LACKS POWER (INSUFFICIENT DRAWBAR PULL) 40-1281
H-2 MACHINE DOES NOT TRAVEL (AT 2ND OR 3RD GEAR SPEED) 40-1284
H-3 MACHINE DOES NOT MOVE OFF AT ALL GEAR SPEEDS 40-1286
H-4 MACHINE TRAVELS ONLY IN ONE DIRECTION, EITHER FORWARD OR IN REVERSE 40-1289
H-5 LARGE TIME LAG IS IN GEAR SHIFTING OR DIRECTIONAL CHANGE 40-1291
H-6 BRAKE DOES NOT WORK 40-1293
H-7 POWER TRAIN OIL OVERHEATS 40-1294
INDEX 00 INDEX AND FOREWORD
00-14 D155AX-8
H-8 UNUSUAL NOISE IS HEARD FROM AROUND WORK EQUIPMENT AND HSS PUMP OR HSS
MOTOR 40-1296
H-9 TORQUE CONVERTER LOCKUP CLUTCH DOES NOT ENGAGE 40-1297
H-10 MACHINE CANNOT BE STEERED (MACHINE DOES NOT TURN LEFT OR RIGHT) 40-1298
H-11 STEERING SPEED OR POWER IS INSUFFICIENT 40-1300
H-12 ALL WORK EQUIPMENTS OPERATE SLOWLY 40-1302
H-13 ALL WORK EQUIPMENTS DO NOT OPERATE 40-1304
H-14 BLADE LIFT SPEED OR POWER IS LOW 40-1306
H-15 BLADE TILT SPEED OR POWER IS LOW 40-1308
H-16 RIPPER LIFT SPEED OR POWER IS LOW 40-1310
H-17 RIPPER TILT SPEED OR POWER IS LOW 40-1312
H-18 HYDRAULIC DRIFT OF LIFTED BLADE IS LARGE 40-1314
H-19 HYDRAULIC DRIFT OF TILTED BLADE IS LARGE 40-1315
H-20 HYDRAULIC DRIFT OF LIFTED RIPPER IS LARGE 40-1316
H-21 RIPPER PIN PULLER CYLINDER DOES NOT OPERATE 40-1317
H-22 BLADE PITCH CYLINDER DOES NOT OPERATE 40-1318
H-23 FAN SPEED IS ABNORMAL (TOO HIGH OR LOW, OR STATIONARY) 40-1319
H-24 UNUSUAL NOISE IS HEARD FROM AROUND FAN 40-1320
TROUBLESHOOTING OF ENGINE (S-MODE) 40-1321
INFORMATION MENTIONED IN TROUBLESHOOTING TABLE (S MODE) 40-1321
S-1 ENGINE DOES NOT CRANK WHEN STARTING SWITCH IS TURNED TO START POSITION
40-1322
S-2 ENGINE CRANKS BUT NO EXHAUST GAS COMES OUT 40-1323
S-3 FUEL IS BEING INJECTED BUT ENGINE DOES NOT START (MISFIRING: ENGINE CRANKS
BUT DOES NOT START) 40-1324
S-4 ENGINE STARTABILITY IS POOR 40-1325
S-5 ENGINE DOES NOT PICK UP SMOOTHLY 40-1327
S-6 ENGINE STOPS DURING OPERATION 40-1329
S-7 ENGINE RUNS ROUGH OR IS UNSTABLE 40-1331
S-8 ENGINE LACKS POWER 40-1332
S-9 KDPF GETS CLOGGED IN A SHORT TIME 40-1334
S-10 ENGINE OIL CONSUMPTION IS EXCESSIVE 40-1336
S-11 OIL BECOMES CONTAMINATED QUICKLY 40-1337
S-12 FUEL CONSUMPTION IS EXCESSIVE 40-1338
S-13 OIL IS IN COOLANT (OR COOLANT SPURTS BACK OR COOLANT LEVEL GOES DOWN)
40-1339
S-14 OIL PRESSURE DROPS 40-1340
S-15 FUEL MIXES INTO ENGINE OIL 40-1342
S-16 WATER MIXES INTO ENGINE OIL (MILKY) 40-1343
S-17 COOLANT TEMPERATURE RISES TOO HIGH (OVERHEATING) 40-1344
S-18 UNUSUAL NOISE IS HEARD 40-1345
S-19 VIBRATION IS EXCESSIVE 40-1346
S-20 AIR CANNOT BE BLED FROM FUEL CIRCUIT 40-1347
S-21 ACTIVE REGENERATION IS EXECUTED FREQUENTLY 40-1348
S-22 ACTIVE REGENERATION TAKES TIME 40-1350
S-23 WHITE SMOKE IS EXHAUSTED DURING ACTIVE REGENERATION 40-1352
S-24 AdBlue/DEF CONSUMPTION IS EXCESSIVE 40-1353
S-25 THERE IS UNUSUAL SMELL (IRRITATING ODOR) 40-1355
S-26 FOREIGN MATERIALS ENTER AdBlue/DEF (AdBlue/DEF INCREASES) 40-1356
50 DISASSEMBLY AND ASSEMBLY 50-1
CONTENTS 50-2
ABBREVIATION LIST 50-9
RELATED INFORMATION ON DISASSEMBLY AND ASSEMBLY 50-15
HOW TO READ THIS MANUAL 50-15
COATING MATERIALS LIST 50-17
SPECIAL TOOLS LIST 50-21
SKETCHES OF SPECIAL TOOLS 50-47
ENGINE AND COOLING SYSTEM 50-73
00 INDEX AND FOREWORD INDEX
D155AX-8 00-15
REMOVE AND INSTALL SUPPLY PUMP ASSEMBLY 50-73
REMOVE AND INSTALL INJECTOR ASSEMBLY 50-91
REMOVE AND INSTALL FUEL DOSER ASSEMBLY 50-114
REMOVE AND INSTALL CYLINDER HEAD ASSEMBLY 50-116
REMOVE AND INSTALL EGR VALVE ASSEMBLY 50-153
REMOVE AND INSTALL EGR COOLER ASSEMBLY 50-157
REMOVE AND INSTALL STARTING MOTOR ASSEMBLY 50-166
REMOVE AND INSTALL ALTERNATOR BELT 50-171
REMOVE AND INSTALL RADIATOR ASSEMBLY 50-175
REMOVE AND INSTALL HYDRAULIC OIL COOLER ASSEMBLY 50-189
REMOVE AND INSTALL AFTERCOOLER ASSEMBLY 50-194
REMOVE AND INSTALL COOLING FAN DRIVE ASSEMBLY 50-199
REMOVE AND INSTALL COOLING FAN MOTOR ASSEMBLY 50-205
REMOVE AND INSTALL ENGINE ASSEMBLY 50-208
REMOVE AND INSTALL ENGINE FRONT OIL SEAL 50-230
REMOVE AND INSTALL ENGINE REAR OIL SEAL 50-236
REMOVE AND INSTALL ENGINE HOOD ASSEMBLY 50-242
REMOVE AND INSTALL FUEL TANK ASSEMBLY 50-250
REMOVE AND INSTALL AdBlue/DEF TANK ASSEMBLY 50-258
REMOVE AND INSTALL AdBlue/DEF TANK SENSOR FLANGE ASSEMBLY 50-271
REMOVE AND INSTALL AdBlue/DEF TANK SENSOR 50-284
REMOVE AND INSTALL AdBlue/DEF TANK STRAINER 50-291
REMOVE AND INSTALL AdBlue/DEF TANK FILLER PORT FILTER 50-293
REMOVE AND INSTALL KDPF ASSEMBLY 50-297
DISASSEMBLE AND ASSEMBLE KDPF ASSEMBLY 50-308
REMOVE AND INSTALL SCR ASSEMBLY 50-318
REMOVE AND INSTALL KDPF AND SCR ASSEMBLY 50-327
REMOVE AND INSTALL KCCV ASSEMBLY 50-340
REMOVE AND INSTALL AdBlue/DEF MIXING TUBE 50-346
REMOVE AND INSTALL AdBlue/DEF INJECTOR 50-359
REMOVE AND INSTALL AdBlue/DEF PUMP 50-367
REMOVE AND INSTALL AdBlue/DEF HOSE 50-377
REMOVE AND INSTALL AIR CLEANER ASSEMBLY 50-395
REMOVE AND INSTALL AIR CONDITIONER COMPRESSOR ASSEMBLY 50-398
REMOVE AND INSTALL AIR CONDITIONER CONDENSER ASSEMBLY 50-401
POWER TRAIN 50-406
REMOVE AND INSTALL DAMPER ASSEMBLY 50-406
DISASSEMBLE AND ASSEMBLE DAMPER ASSEMBLY 50-412
REMOVE AND INSTALL POWER TRAIN UNIT ASSEMBLY 50-417
DISCONNECT AND CONNECT POWER TRAIN UNIT ASSEMBLY 50-433
DISASSEMBLE AND ASSEMBLE PTO ASSEMBLY 50-450
DISASSEMBLE AND ASSEMBLE TORQUE CONVERTER ASSEMBLY 50-460
DISASSEMBLE AND ASSEMBLE TRANSMISSION ASSEMBLY 50-474
DISASSEMBLE AND ASSEMBLE HSS ASSEMBLY 50-497
REMOVE AND INSTALL HSS MOTOR ASSEMBLY 50-521
REMOVE AND INSTALL FINAL DRIVE ASSEMBLY 50-524
REMOVE AND INSTALL FINAL DRIVE ASSEMBLY (D155PX-8) 50-530
DISASSEMBLE AND ASSEMBLE FINAL DRIVE ASSEMBLY 50-537
UNDERCARRIAGE AND FRAME 50-556
REMOVE AND INSTALL TRACK FRAME ASSEMBLY 50-556
REMOVE AND INSTALL TRACK FRAME ASSEMBLY (D155PX-8) 50-565
REMOVE AND INSTALL IDLER ASSEMBLY 50-576
REMOVE AND INSTALL IDLER ASSEMBLY (D155PX-8) 50-580
DISASSEMBLE AND ASSEMBLE IDLER ASSEMBLY 50-583
DISASSEMBLE AND ASSEMBLE IDLER ASSEMBLY (D155PX-8) 50-590
REMOVE AND INSTALL RECOIL SPRING ASSEMBLY 50-595
REMOVE AND INSTALL RECOIL SPRING ASSEMBLY (D155PX-8) 50-596
DISASSEMBLE AND ASSEMBLE RECOIL SPRING ASSEMBLY 50-599
INDEX 00 INDEX AND FOREWORD
00-16 D155AX-8
DISASSEMBLE AND ASSEMBLE RECOIL SPRING (D155PX-8) 50-606
REMOVE AND INSTALL TRACK ROLLER ASSEMBLY 50-616
REMOVE AND INSTALL TRACK ROLLER ASSEMBLY (D155PX-8) 50-621
DISASSEMBLE AND ASSEMBLE TRACK ROLLER ASSEMBLY 50-624
REMOVE AND INSTALL NO 1 BOGIE ASSEMBLY 50-630
REMOVAL AND INSTALLATION OF NO 2, 3, 4 BOGIE ASSEMBLY 50-639
DISASSEMBLE AND ASSEMBLE BOGIE ASSEMBLY 50-649
REMOVE AND INSTALL CARRIER ROLLER ASSEMBLY 50-653
REMOVE AND INSTALL CARRIER ROLLER ASSEMBLY (D155PX-8) 50-656
DISASSEMBLE AND ASSEMBLE CARRIER ROLLER ASSEMBLY 50-659
REMOVE AND INSTALL PIVOT SHAFT ASSEMBLY 50-665
REMOVE AND INSTALL PIVOT SHAFT ASSEMBLY 50-669
SEPARATION AND CONNECTION OF TRACK ASSEMBLY(D155PX-8) 50-674
SEPARATION AND CONNECTION OF TRACK ASSEMBLY 50-679
SEPARATION AND CONNECTION OF PLUS TYPE TRACK ASSEMBLY 50-684
DISASSEMBLE AND ASSEMBLE TRACK ASSEMBLY GENERALLY 50-686
DISASSEMBLE AND ASSEMBLE PLUS TYPE TRACK ASSEMBLY GENERALLY 50-701
DISASSEMBLE AND ASSEMBLE ONE TRACK LINK ASSEMBLY IN FIELD 50-711
DISASSEMBLE AND ASSEMBLE MASTER LINK 50-716
REMOVE AND INSTALL EQUALIZER BAR ASSEMBLY(D155PX-8) 50-720
REMOVE AND INSTALL EQUALIZER BAR ASSEMBLY 50-726
DISASSEMBLE AND ASSEMBLE EQUALIZER BAR BUSHINGS(D155PX-8) 50-732
DISASSEMBLE AND ASSEMBLE EQUALIZER BAR BUSHING 50-734
REMOVE AND INSTALL SPROCKET 50-736
REMOVAL AND INSTALLATION OF UNDERGUARD ASSEMBLY 50-738
HYDRAULIC SYSTEM 50-753
REMOVE AND INSTALL HYDRAULIC TANK ASSEMBLY 50-753
REMOVE AND INSTALL WORK EQUIPMENT PUMP AND HSS PUMP ASSEMBLY 50-758
REMOVE AND INSTALL POWER TRAIN PUMP AND STEERING LUBRICATION PUMP ASSEMBLY
50-764
REMOVE AND INSTALL COOLING FAN PUMP ASSEMBLY 50-771
REMOVE AND INSTALL SCAVENGING PUMP ASSEMBLY 50-778
REMOVE AND INSTALL CONTROL VALVE ASSEMBLY 50-781
WORK EQUIPMENT 50-788
REMOVE AND INSTALL BLADE ASSEMBLY 50-788
REMOVE AND INSTALL BLADE LIFT CYLINDER ASSEMBLY 50-794
REMOVE AND INSTALL STROKE AND RESET SENSING BLADE LIFT CYLINDER ASSEMBLY
50-803
DISASSEMBLE AND ASSEMBLE BLADE ASSEMBLY 50-813
METHOD OF BLADE ANGLING 50-824
DISASSEMBLE AND ASSEMBLE MULTI-SHANK RIPPER ASSEMBLY 50-827
DISASSEMBLE AND ASSEMBLE GIANT RIPPER ASSEMBLY 50-837
DISASSEMBLE AND ASSEMBLE BLADE LIFT CYLINDER ASSEMBLY 50-847
DISASSEMBLE AND ASSEMBLE STROKE/RESET SENSING BLADE LIFT CYLINDER ASSEMBLY
50-855
DISASSEMBLE AND ASSEMBLE BLADE TILT CYLINDER ASSEMBLY 50-856
DISASSEMBLE AND ASSEMBLE RIPPER CYLINDER ASSEMBLY 50-863
CAB RELATED PARTS 50-871
REMOVE AND INSTALL OPERATOR CAB ASSEMBLY 50-871
REMOVE AND INSTALL OPERATOR CAB GLASS (ADHERED GLASS) 50-891
REMOVE AND INSTALL AIR CONDITIONER UNIT ASSEMBLY 50-898
REMOVE AND INSTALL OPERATOR’S SEAT 50-913
REMOVE AND INSTALL SEATBELT 50-917
ELECTRICAL SYSTEM 50-919
REMOVE AND INSTALL ENGINE CONTROLLER ASSEMBLY 50-919
REMOVE AND INSTALL POWER TRAIN CONTROLLER ASSEMBLY 50-927
REMOVE AND INSTALL WORK EQUIPMENT CONTROLLER ASSEMBLY 50-930
REMOVE AND INSTALL MACHINE MONITOR ASSEMBLY 50-933
00 INDEX AND FOREWORD INDEX
D155AX-8 00-17
REMOVE AND INSTALL MASS AIR FLOW AND TEMPERATURE SENSOR 50-936
REMOVE AND INSTALL KCCV CRANKCASE PRESSURE SENSOR 50-939
REMOVE AND INSTALL SCR TEMPERATURE SENSOR 50-941
REMOVE AND INSTALL BATTERY RELAY 50-945
REMOVE AND INSTALL KOMTRAX TERMINAL ASSEMBLY 50-960
60 MAINTENANCE STANDARD 60-1
CONTENTS 60-2
ABBREVIATION LIST 60-4
ENGINE AND COOLING SYSTEM 60-10
MAINTENANCE STANDARD OF ENGINE MOUNT 60-10
MAINTENANCE STANDARD OF DAMPER 60-12
MAINTENANCE STANDARD OF COOLING SYSTEM 60-14
MAINTENANCE STANDARD OF COOLING FAN PUMP 60-16
MAINTENANCE STANDARD OF COOLING FAN MOTOR 60-20
POWER TRAIN 60-22
MAINTENANCE STANDARD OF UNIVERSAL JOINT 60-22
MAINTENANCE STANDARD OF POWER TRAIN MOUNT 60-23
MAINTENANCE STANDARD OF POWER TRAIN MOUNT(D155PX-8) 60-25
MAINTENANCE STANDARD OF TORQUE CONVERTER AND PTO 60-27
MAINTENANCE STANDARD OF TORQUE CONVERTER CONTROL VALVE 60-32
MAINTENANCE STANDARD OF LOCKUP CLUTCH ECMV 60-33
MAINTENANCE STANDARD OF STATOR CLUTCH ECMV 60-34
MAINTENANCE STANDARD OF TRANSMISSION 60-35
MAINTENANCE STANDARD OF TRANSMISSION ECMV 60-40
MAINTENANCE STANDARD OF MAIN RELIEF VALVE AND TORQUE CONVERTER RELIEF VALVE
60-41
MAINTENANCE STANDARD OF TRANSMISSION LUBRICATION RELIEF VALVE 60-42
MAINTENANCE STANDARD OF BEVEL GEAR SHAFT, HSS, AND BRAKE 60-43
MAINTENANCE STANDARD OF BRAKE CONTROL VALVE 60-49
MAINTENANCE STANDARD OF BRAKE ECMV 60-51
MAINTENANCE STANDARD OF BRAKE SOLENOID VALVE 60-52
MAINTENANCE STANDARD OF SUDDEN STOP PREVENTION VALVE 60-53
MAINTENANCE STANDARD OF FINAL DRIVE 60-54
MAINTENANCE STANDARD OF FINAL DRIVE(D155PX-8) 60-57
MAINTENANCE STANDARD OF SPROCKET FOR CONVENTIONAL TYPE TRACK SHOE 60-60
MAINTENANCE STANDARD OF SPROCKET TOOTH PROFILE FULL-SCALE DRAWING FOR CONVENTIONAL
TYPE TRACK SHOE 60-61
MAINTENANCE STANDARD OF SPROCKET FOR PLUS TYPE TRACK SHOE 60-63
MAINTENANCE STANDARD OF SPROCKET TOOTH PROFILE FULL-SCALE DRAWING FOR PLUS
TYPE TRACK SHOE 60-64
UNDERCARRIAGE AND FRAME 60-66
MAINTENANCE STANDARD OF MAIN FRAME 60-66
MAINTENANCE STANDARD OF MAIN FRAME(D155PX-8) 60-68
MAINTENANCE STANDARD OF SUSPENSION 60-70
MAINTENANCE STANDARD OF SUSPENSION(D155PX-8) 60-72
MAINTENANCE STANDARD OF TRACK FRAME AND IDLER CUSHION 60-75
MAINTENANCE STANDARD OF TRACK FRAME AND IDLER CUSHION(D155PX-8) 60-77
MAINTENANCE STANDARD OF IDLER 60-80
MAINTENANCE STANDARD OF IDLER(D155PX-8) 60-82
MAINTENANCE STANDARD OF TRACK ROLLER FOR CONVENTIONAL TYPE TRACK SHOES
60-84
MAINTENANCE STANDARD OF TRACK ROLLER FOR PLUS TYPE TRACK SHOES 60-86
MAINTENANCE STANDARD OF CARRIER ROLLER FOR CONVENTIONAL TYPE TRACK SHOE
60-88
MAINTENANCE STANDARD OF CARRIER ROLLER FOR PLUS TYPE TRACK SHOE 60-89
MAINTENANCE STANDARD OF CONVENTIONAL TYPE TRACK SHOE 60-90
MAINTENANCE STANDARD OF PLUS TYPE TRACK SHOE 60-92
MAINTENANCE STANDARD OF SINGLE SHOE AND HEAVY DUTY SHOE 60-94
INDEX 00 INDEX AND FOREWORD
00-18 D155AX-8
MAINTENANCE STANDARD OF SINGLE SHOE AND HEAVY DUTY SHOE(D155PX-8) 60-95
HYDRAULIC SYSTEM 60-96
MAINTENANCE STANDARD OF HYDRAULIC TANK 60-96
MAINTENANCE STANDARD OF SCAVENGING PUMP 60-97
MAINTENANCE STANDARD OF STEERING LUBRICATION PUMP AND POWER TRAIN PUMP
60-98
MAINTENANCE STANDARD OF WORK EQUIPMENT AND HSS PUMP 60-100
MAINTENANCE STANDARD OF PC-EPC VALVE 60-102
MAINTENANCE STANDARD OF HSS MOTOR 60-103
MAINTENANCE STANDARD OF CONTROL VALVE 60-106
MAINTENANCE STANDARD OF SELF-PRESSURE REDUCING VALVE 60-120
MAINTENANCE STANDARD OF QUICK DROP VALVE 60-122
WORK EQUIPMENT 60-124
MAINTENANCE STANDARD OF CYLINDER STAY 60-124
MAINTENANCE STANDARD OF FRONT WORK EQUIPMENT 60-126
MAINTENANCE STANDARD OF CUTTING EDGE AND END BIT 60-131
MAINTENANCE STANDARD OF BLADE LIFT CYLINDER 60-133
MAINTENANCE STANDARD OF BLADE TILT CYLINDER 60-134
MAINTENANCE STANDARD OF VARIABLE MULTI-SHANK RIPPER 60-135
MAINTENANCE STANDARD OF VARIABLE GIANT RIPPER 60-138
MAINTENANCE STANDARD OF RIPPER LIFT CYLINDER 60-141
MAINTENANCE STANDARD OF RIPPER TILT CYLINDER 60-142
CAB AND ITS ATTACHMENTS 60-143
MAINTENANCE STANDARD OF CAB MOUNT 60-143
80 APPENDIX 80-1
CONTENTS 80-2
ABBREVIATION LIST 80-4
AIR CONDITIONER SYSTEM 80-10
PRECAUTIONS FOR REFRIGERANT 80-10
AIR CONDITIONER COMPONENT 80-11
SPECIFICATIONS OF AIR CONDITIONER 80-13
CONFIGURATION AND FUNCTION OF REFRIGERATION CYCLE 80-14
OUTLINE OF REFRIGERATION CYCLE 80-15
COMPONENT PARTS OF AIR CONDITIONER SYSTEM 80-17
AIR CONDITIONER UNIT 80-17
COMPONENT PARTS OF AIR CONDITIONER UNIT 80-21
AIR CONDITIONER CONTROLLER 80-25
COMPRESSOR 80-26
CONDENSER 80-27
RECEIVER DRIER 80-28
SENSORS FOR AIR CONDITIONER SYSTEM 80-29
EXPLANATION OF PROCEDURE FOR TESTING AND TROUBLESHOOTING OF AIR CONDITIONER
80-31
CIRCUIT DIAGRAM AND ARRANGEMENT OF CONNECTOR PINS FOR AIR CONDITIONER 80-33
AIR CONDITIONER SYSTEM DIAGRAM 80-35
INPUT AND OUTPUT SIGNALS OF AIR CONDITIONER CONTROLLER 80-36
INSTALLATION LOCATIONS OF AIR CONDITIONER PARTS AND ARRANGEMENT OF CONNECTORS
80-38
TESTING AIR LEAKAGE (DUCT) 80-46
METHOD FOR TESTING AIR LEAKAGE (DUCT) 80-46
TESTING AIR CONDITIONER USING SELF-DIAGNOSIS FUNCTION 80-49
HOW TO OPEN THE ELECTRICAL SYSTEM ABNORMALITY RECORD SCREEN IN SERVICE MODE
OF THE MACHINE MONITOR 80-50
TEST VENT (MODE) CHANGEOVER 80-51
METHOD FOR TESTING VENT (MODE) CHANGEOVER 80-51
TESTING FRESH/RECIRC AIR CHANGEOVER 80-52
METHOD FOR TESTING FRESH/RECIRC AIR CHANGEOVER 80-52
TEST SUNLIGHT SENSOR 80-53
00 INDEX AND FOREWORD INDEX
D155AX-8 00-19
METHOD FOR TESTING SUNLIGHT SENSOR 80-53
TEST (TRIPLE) PRESSURE SWITCH FOR REFRIGERANT 80-54
METHOD FOR TESTING (TRIPLE) PRESSURE SWITCH FOR REFRIGERANT 80-54
TEST RELAYS 80-55
METHOD FOR TESTING RELAYS 80-55
AIR CONDITIONER TROUBLESHOOTING CHART 1 80-56
AIR CONDITIONER TROUBLESHOOTING CHART 2 80-57
INFORMATION DESCRIBED IN TROUBLESHOOTING TABLE 80-60
FAILURE CODE [879AKA] 80-62
FAILURE CODE [879AKB] 80-63
FAILURE CODE [879BKA] 80-64
FAILURE CODE [879BKB] 80-66
FAILURE CODE [879CKA] 80-68
FAILURE CODE [879CKB] 80-69
FAILURE CODE [879DKZ] 80-70
FAILURE CODE [879EMC] 80-72
FAILURE CODE [879FMC] 80-73
FAILURE CODE [879GKX] 80-74
A-1 TROUBLESHOOTING FOR POWER SUPPLY SYSTEM (AIR CONDITIONER DOES NOT OPERATE)
80-76
A-2 TROUBLESHOOTING FOR COMPRESSOR AND REFRIGERANT SYSTEM (AIR IS NOT COOLED)
80-78
A-3 TROUBLESHOOTING FOR BLOWER MOTOR SYSTEM (NO AIR COMES OUT OR AIR FLOW IS
ABNORMAL) 80-82
A-4 TROUBLESHOOTING FOR FRESH/RECIRC AIR CHANGEOVER 80-84
TROUBLESHOOTING USING GAUGE PRESSURE 80-86
CONNECTION OF SERVICE TOOL 80-89
METHOD FOR CONNECTING SERVICE TOOL 80-89
PRECAUTIONS FOR DISCONNECTING AND CONNECTING HOSES AND TUBES IN AIR CONDITIONER
PIPINGS 80-91
HANDLE COMPRESSOR OIL 80-93
90 CIRCUIT DIAGRAMS 90-1
CONTENTS 90-2
ABBREVIATION LIST 90-3
HYDRAULIC CIRCUIT DIAGRAM 90-9
SYMBOLS USED IN HYDRAULIC CIRCUIT DIAGRAM 90-9
HYDRAULIC CIRCUIT DIAGRAM (1/2) 90-13
HYDRAULIC CIRCUIT DIAGRAM (2/2) 90-15
POWER TRAIN HYDRAULIC CIRCUIT DIAGRAM 90-17
ELECTRICAL CIRCUIT DIAGRAM 90-19
SYMBOLS USED IN ELECTRICAL CIRCUIT DIAGRAM 90-19
ELECTRICAL CIRCUIT DIAGRAM (1/16) 90-23
ELECTRICAL CIRCUIT DIAGRAM (2/16) 90-25
ELECTRICAL CIRCUIT DIAGRAM (3/16) 90-27
ELECTRICAL CIRCUIT DIAGRAM (4/16) 90-29
ELECTRICAL CIRCUIT DIAGRAM (5/16) 90-31
ELECTRICAL CIRCUIT DIAGRAM (6/16) 90-33
ELECTRICAL CIRCUIT DIAGRAM (7/16) 90-35
ELECTRICAL CIRCUIT DIAGRAM (8/16) 90-37
ELECTRICAL CIRCUIT DIAGRAM (9/16) 90-39
ELECTRICAL CIRCUIT DIAGRAM (10/16) 90-41
ELECTRICAL CIRCUIT DIAGRAM (11/16) 90-43
ELECTRICAL CIRCUIT DIAGRAM (12/16) 90-45
ELECTRICAL CIRCUIT DIAGRAM (13/16) 90-47
ELECTRICAL CIRCUIT DIAGRAM (14/16) 90-49
ELECTRICAL CIRCUIT DIAGRAM (15/16) 90-51
ELECTRICAL CIRCUIT DIAGRAM (16/16) 90-53
INDEX 1

VIDEO PREVIEW OF THE MANUAL:

IMAGES PREVIEW OF THE MANUAL: