Komatsu D375A-5 RADIO CONTROL SPECIAL SMALL ELECTRIC POWER Operation & Maintenance Manual PDF

Komatsu D375A-5 RADIO CONTROL SPECIAL SMALL ELECTRIC POWER SPECIFICATION Operation & Maintenance Manual

Description:

Komatsu D375A-5 RADIO CONTROL SPECIAL SMALL ELECTRIC POWER SPECIFICATION Operation & Maintenance Manual

This manual provides rules and guidelines which will help you use this machine safely and effectively. The precautions in this manual must be followed at all times when performing operation and maintenance. Most accidents are caused by the failure to follow fundamental safety rules for the operation and maintenance of machines. Accidents can be prevented by knowing beforehand conditions that may cause hazard when performing operation and maintenance. This manual contains important precautions to be followed when carrying out work using a bulldozer equipped with this radio control system. Always read this manual together with the Operation and Maintenance Manual for the bulldozer equipped with radio control.

Table Of Contents:

Komatsu D375A-5 RADIO CONTROL SPECIAL SMALL ELECTRIC POWER SPECIFICATION Operation & Maintenance Manual

MAIN MENU...................................................................................................... 0
D375A-5 BASE MANUAL............................................................................................ 0
COVER.......................................................................................................... 1
FOREWORD....................................................................................................... 2
	1. FOREWORD................................................................................................ 3
	2. SAFETY INFORMATION...................................................................................... 4
	3. INTRODUCTION............................................................................................ 6
	4. PRODUCT INFORMATION..................................................................................... 7
		4.1 LOCATION OF NAMEPLATE FOR TRANSMITTER (TX. UNIT)................................................... 7
		4.2 LOCATION OF NAMEPLATE FOR RECEIVER (RX. UNIT)...................................................... 7
		4.3 LOCATION OF NAMEPLATE FOR CONTROLLER............................................................... 7
		4.4 YOUR MACHINE SERIAL NUMBERS AND DISTRIBUTOR........................................................ 8
	5. CONTENTS................................................................................................ 9
SAFETY.........................................................................................................12
	6. GENERAL PRECAUTIONS.....................................................................................13
		SAFETY RULES...........................................................................................13
		IF ABNORMALITIES ARE FOUND.............................................................................13
		FIRE EXTINGUISHER AND FIRST AID KIT....................................................................14
		SAFETY FEATURES........................................................................................14
		KEEP MACHINE CLEAN.....................................................................................14
		INSIDE OPERATOR'S COMPARTMENT..........................................................................14
		ALWAYS APPLY LOCK WHEN LEAVING OPERATOR'S SEAT.........................................................15
		HANDRAILS AND STEPS....................................................................................16
		MOUNTING AND DISMOUNTING...............................................................................16
		NO PEOPLE ON ATTACHMENTS...............................................................................16
		PREVENTION OF BURNS....................................................................................17
		FIRE PREVENTION........................................................................................17
		ACTION IF FIRE OCCURS..................................................................................18
		WINDOW WASHER LIQUID...................................................................................18
		PRECAUTIONS WHEN USING ROPS (Roll Over Protective Structure)...........................................19
		PRECAUTIONS FOR ATTACHMENTS............................................................................19
		CAB WINDOW GLASSES.....................................................................................19
		UNAUTHORIZED MODIFICATION..............................................................................19
		SAFETY AT WORKSITE.....................................................................................20
		WORKING ON LOOSE GROUND................................................................................20
		DO NOT GO CLOSE TO HIGH-VOLTAGE CABLES.................................................................21
		ENSURE GOOD VISIBILITY.................................................................................21
		VENTILATION FOR ENCLOSED AREAS.........................................................................21
		CHECKING SIGNALMAN'S SIGNALS AND SIGNS.................................................................22
		BE CAREFUL ABOUT ASBESTOS DUST.........................................................................22
	7. PRECAUTIONS FOR OPERATION...............................................................................23
		BEFORE STARTING ENGINE.................................................................................23
		CHECKS BEFORE STARTING ENGINE..........................................................................23
		ENSURING SAFETY AT THE JOBSITE.........................................................................24
		INSTALLATION, INSPECTION OF RADIO CONTROL BOX..........................................................24
		PRECAUTIONS WHEN STARTING ENGINE.......................................................................24
		PRECAUTIONS WHEN USING RADIO CONTROL FOR TRAVEL........................................................24
OPERATION......................................................................................................26
	8. GENERAL VIEW............................................................................................27
		8.1 GENERAL VIEW OF MACHINE............................................................................27
	9. EXPLANATION OF COMPONENTS...............................................................................29
		9.1 TRANSMITTER (TX. UNIT).............................................................................30
			9.1.1 CONTROL LEVERS...............................................................................31
			9.1.2 OPERATION METHOD FOR BLADE, DUAL TILT, AND PITCH USING RADIO CONTROL.........................32
			9.1.3 OPERATION METHOD FOR PIN-PULLER USING RADIO CONTROL..........................................33
			9.1.4 OPERATION METHOD FOR SSC MODE SELECTION USING RADIO CONTROL..................................34
			9.1.5 SWITCHES.....................................................................................35
			9.1.6 OTHERS.......................................................................................36
		9.2 RECEIVER UNIT (RX. UNIT)...........................................................................37
		9.3 CONTROLLERS........................................................................................38
		9.4 CHARGER............................................................................................39
		9.5 ROTATING LAMPS.....................................................................................40
			9.5.1 STANDARD INSTALLATION........................................................................40
			9.5.2 OPTION.......................................................................................40
	10. HANDLING RADIO CONTROL.................................................................................41
		10.1 FLOW CHART FOR STARTING, OPERATING USING RADIO CONTROl............................................42
		10.2 FLOW CHART FOR STOPPING OPERATION USING RADIO CONTROL.............................................43
		10.3 DETAILS OF PROCEDURE FOR RADIO CONTROL OPERATION..................................................44
			10.3.1 CHECKS BEFORE STARTING......................................................................44
			10.3.2 Tilt angle..................................................................................49
	11. PRECAUTIONS WHEN OPERATING RADIO CONTROL...............................................................50
	12. Operation using radio control..........................................................................51
		12.1 Moving off........................................................................................51
		12.2 Steering (changing direction of travel)...........................................................52
		12.3 Work equipment (blade RAISE/LOWER/FLOAT, tilt left/right, ripper UP/DOWN, ripper tilt in/back)....52
		12.4 Acceleration/deceleration.........................................................................52
		12.5 Stopping (braking)................................................................................53
	13. PRECAUTIONS WHEN HANDLING RADIO CONTROL................................................................54
		13.1 TRANSMITTER.......................................................................................54
		13.2 RECEIVER UNIT, CONTROLLER.........................................................................54
		13.3 CHARGER FOR AC, DC................................................................................54
		13.4 PRECAUTIONS WHEN OPERATING FROM OPERATOR'S SEAT...................................................55
	14. CHECKS AROUND MACHINE..................................................................................56
		14.1 HYDRAULIC UNIT....................................................................................56
		14.2 RECEIVER UNIT, CONTROLLER.........................................................................56
		14.3 ANTENNA...........................................................................................56
		14.4 ROTATING LAMPS....................................................................................56
	15. IF ANY FAILURE IS SUSPECTED............................................................................57
		15.1 Radio control operation...........................................................................57
		15.2 On-board operation (only problems related to radio control).......................................57
		15.3 REPORTING FAILURE.................................................................................57

Screenshot Of The Manual: