Komatsu Mining Germany PC5500-6 Service Manual – PDF DOWNLOAD

Komatsu Mining Germany PC5500-6 Service Manual – PDF DOWNLOAD

DESCRIPTION:

Komatsu Mining Germany PC5500-6 Service Manual – PDF DOWNLOAD

SAFETY
SAFETY NOTICE
• IMPORTANT SAFETY NOTICE
Proper service and repair is extremely important for safe machine operation. The
service and repair techniques recommended by Komatsu and described in this manual
are both effective and safe. Some of these techniques require the use of tools specially
designed by Komatsu for the specific purpose.
The following Symbols are used in this Manual to designate Instructions of
particular Importance.

WARNING – Serious personal injury or extensive property damage can
result if the warning instructions are not followed.
To prevent injury to workers, this symbol is used to mark
safety precautions in this manual. The cautions
accompanying these symbols should always be followed
carefully. If any dangerous situation arises or may possibly
arise, first consider safety, and take the necessary actions to
deal with the situation.
CAUTION – Minor personal injury can result or a part, an assembly, or
the shovel can be damaged if the caution instructions are not
followed.
NOTICE – Refers to special information

GENERAL PRECAUTIONS
Mistakes in operation are extremely dangerous. Read the OPERATION & MAINTENANCE
MANUAL carefully BEFORE operating the machine.
1. Before carrying out any greasing or repairs, read all the precautions given on the decals
which are fixed to the machine.
2. When carrying out any operation, always wear safety shoes and helmet. Do not wear
loose work clothes, or clothes with buttons missing.
• Always wear safety glasses when hitting parts with a hammer.
• Always wear safety glasses when grinding parts with a grinder, etc.

Cont’d:
GENERAL PRECAUTIONS
3. If welding repairs are needed, always have a trained, experienced welder carry out the
work. When carrying out welding work, always wear welding gloves, apron, glasses, cap
and other clothes suited for welding work.
4. When carrying out any operation with two or more workers, always agree on the
operating procedure before starting. Always inform your fellow workers before starting
any step of the operation. Before starting work, hang UNDER REPAIR signs on the
controls in the operator’s compartment.
5. Keep all tools in good condition and learn the correct way to use them.
6. Decide a place in the repair workshop to keep tools and removed parts. Always keep the
tools and parts in their correct places. Always keep the work area clean and make sure
that there is no dirt or oil on the floor. Smoke only in the areas provided for smoking.
Never smoke while working.
PREPARATIONS FOR WORK
7. Before adding oil or making repairs, park the machine on hard, level ground, and block
the wheels or tracks to prevent the machine from moving.
8. Before starting work, lower bucket, hammer or any other work equipment to the ground.
If this is not possible, insert the safety pin or use blocks to prevent the work equipment
from falling. In addition, be sure to lock all the control levers and hang warning signs on
them.
9. When disassembling or assembling, support the machine with blocks, jacks or stands
before starting work.
10. Remove all mud and oil from the steps or other places used to get on and off the machine.
Always use the handrails, ladders or steps when getting on or off the machine. Never
jump on or off the machine. If it is impossible to use the handrails, ladders or steps, use a
stand to provide safe footing.
TABLE OF CONTENTS:

Komatsu Mining Germany PC5500-6 Service Manual – PDF DOWNLOAD

00 Safety – Foreword
01 Technical DATA (Leaflet)
02 Assembly PROCEDURE (Brochure)
Section
1. Main assembly groups
2. Drive.
3. Hydraulic oil tank.
4. Hydraulic oil cooling.
5. Controlling.
6. Components
7. Main hydraulic pumps and pump regulation.
8. Operating hydraulic.
9. Hydraulic track tensioning system.
10. Hydraulic operated access ladder
11. Cable wheel
12. Hints for the hydraulic circuit diagram
13. Hints for the electric circuit diagram
14. ECS-T
15. Lubrication Systems
IMAGES PREVIEW OF THE MANUAL: