Komatsu PC360LCi-11 Hydraulic Excavator Shop Manual SEN06601-11 – PDF DOWNLOAD

Komatsu PC360LCi-11 Hydraulic Excavator Shop Manual SEN06601-11 – PDF DOWNLOAD

FILE DETAILS:

Komatsu PC360LCi-11 Hydraulic Excavator Shop Manual SEN06601-11 – PDF DOWNLOAD

Language : English
Pages : 3782
Downloadable : Yes
File Type : PDF
Size: 94 MB

DESCRIPTION:

Komatsu PC360LCi-11 Hydraulic Excavator Shop Manual SEN06601-11 – PDF DOWNLOAD

SERIAL NUMBERS 90156 and up

FOREWORD, SAFETY, BASIC INFORMATION
HOW TO READ THE SHOP MANUAL
• Some of the attachments and options described in this shop manual may not be available in some areas. If
they are required, consult your Komatsu distributor.
• The materials and specifications are subject to change without notice.
• Shop Manuals are available for “machine part” and “engine part”. For the engine unit, see the shop manual
for the machine which has the same engine model.
• Actual machine may differ from the images which are contained in this manual. A typical model is shown in
the illustrations of this shop manual.
Composition of the shop manual
This shop manual contains technical information necessary to perform services in workshops. It is divided into
the following chapters for the ease of use.
00 INDEX AND FOREWORD
This section describes the index, foreword, safety, and basic information.
01 SPECIFICATIONS
This section describes the specifications of the machine.
10 STRUCTURE AND FUNCTION
This section describes the structure and operation of each component with respect to each system. “STRUCTURE
AND FUNCTION” is helpful in not only understanding the structure of each component but performing
troubleshooting.
20 STANDARD VALUE TABLE
This section describes the standard values for new machine and failure criteria for testing and adjusting, and
troubleshooting. Use the standard values table to check the standard values for testing and adjusting, and judge
troubles in troubleshooting.
30 TESTING AND ADJUSTING
This section describes the measuring tools and measuring methods for testing and adjusting as well as the adjusting
method of each part. The standard values and repair limit for TESTING AND ADJUSTING are described
in “STANDARD VALUE TABLE”.
40 TROUBLESHOOTING
This section describes troubleshooting of failure part and its remedy method on the occurrence of the failure.
Descriptions of troubleshooting are sorted by failure mode.
50 DISASSEMBLY AND ASSEMBLY
This section describes the special tools, work procedures, and safety precautions necessary for removal, installation,
disassembly, and assembly of the components and parts. In addition, tightening torques, quantity, and
weight of the coating materials, lubricants, and coolant necessary to these works are shown.
60 MAINTENANCE STANDARD
This section describes the maintenance standard value of each component. The maintenance standard shows
the criteria and remedies for disassembly and assembly.
80 THE OTHER INFORMATION
This section describes the structure and function, testing and adjusting, and troubleshooting for all of the other
components or equipment which cannot be separately classified in the appendix.
90 Circuit diagrams
This section describes hydraulic circuit diagrams and electrical circuit diagrams.

General precautions
If the machine is handled incorrectly, it is dangerous. Read and understand what is described in the
operation and maintenance manual before operation. Read and understand what is described in this
manual before operation.
• Read and understand the meaning of all the safety labels stuck to the machine before performing any
greasing or repairs. For the locations of the safety labels and detailed explanation of precautions, see Operation
and Maintenance Manual.
• Tools and removed parts in the workshop should be well organized. Always keep the tools and parts in their
correct places. Always keep the work area clean and make sure that there is no dust, dirt, oil, or water on
the floor. Smoke only in the designated areas. Never smoke while working.
• Keep all tools in good condition, learn the correct way to use them, and use the proper ones. Check the
tools, machine, forklift truck, service car, etc. thoroughly before starting the work.
• Always wear safety shoes and helmet when performing
any operation. Do not wear loose clothes, or clothes with
buttons missing.
• Always wear the protective eyeglasses when hitting parts
with a hammer.
• Always wear the protective eyeglasses when grinding
parts with a grinder, etc.
• When performing any operation with multiple workers, always
agree on the operating procedure before starting. Be
clear in verbal communication, and observe hand signals.
Hang “UNDER REPAIR” warning tag in the operator’s
compartment Before starting work.
• Work and operation which require license or qualification
should be performed by qualified workers.
• Welding repairs should be performed by trained and experienced welders. When performing welding work,
always wear welding gloves, apron, welding goggles, cap and other clothes suited for welding work.
• Warm up before starting the work with exercise which increases alertness and the range of motion in order
to prevent injury.
• Avoid prolonged work, and take a rest at times to keep up a good condition. Take a rest at designated safe
area.
Precautions for preparatory work:
• Place the machine on a firm and level ground, and apply the parking brake and chock the wheels or tracks
to prevent the machine from moving before adding oil or making any repairs.
• Lower the work equipment (blade, ripper, bucket, etc.) to the ground before starting work. If this is not possible,
insert the lock pin or use blocks to prevent the work equipment from falling. In addition, be sure to
lock all the control levers and hang “UNDER REPAIR” warning tag on them.
• When performing the disassembling or assembling work, support the machine securely with blocks, jacks,
or stands before starting the work.
• Remove all mud and oil from the steps or other places for going up and down on the machine. Always use the handrails, ladders or steps when for going up and down on the machine. Never jump on or off the machine. When the scaffold is not provided, use steps or stepladder to secure your footing. Do not use handrails, ladders, or steps if they are damaged or deformed. Repair it or replace it immediately.

TABLE OF CONTENTS:

Komatsu PC360LCi-11 Hydraulic Excavator Shop Manual SEN06601-11 – PDF DOWNLOAD

INDEX
00 INDEX AND FOREWORD 00-1
ABBREVIATION LIST 00-22
FOREWORD, SAFETY, BASIC INFORMATION 00-28
HOW TO READ THE SHOP MANUAL 00-28
SAFETY NOTICE FOR OPERATION 00-30
PRECAUTIONS TO PREVENT FIRE 00-38
ACTIONS IF FIRE OCCURS 00-40
PRECAUTIONS FOR DISPOSING OF WASTE MATERIALS 00-41
ACTIONS TAKEN TO MEET EXHAUST GAS REGULATIONS 00-42
PRECAUTIONS FOR DEF 00-43
STORE AdBlue/DEF 00-44
PRECAUTIONS FOR HANDLING HYDRAULIC EQUIPMENT 00-45
PRECAUTIONS FOR DISCONNECTION AND CONNECTION OF PIPINGS 00-48
PRECAUTIONS FOR HANDLING ELECTRICAL EQUIPMENT 00-55
PRECAUTIONS FOR HANDLING FUEL SYSTEM EQUIPMENT 00-57
PRECAUTIONS FOR HANDLING INTAKE SYSTEM EQUIPMENT 00-58
PRACTICAL USE OF KOMTRAX 00-59
DISCONNECT AND CONNECT PUSH-PULL TYPE COUPLER 00-60
PRECAUTIONS FOR DISCONNECTION AND CONNECTION OF CONNECTORS 00-64
METHOD FOR DISCONNECTING AND CONNECTING DEUTSCH CONNECTOR 00-68
METHOD FOR DISCONNECTING AND CONNECTING SLIDE LOCK TYPE CONNECTOR 00-69
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR WITH LOCK TO PULL 00-71
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR WITH LOCK TO PUSH 00-72
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR WITH HOUSING TO ROTATE
00-74
HOW TO READ ELECTRICAL WIRE CODE 00-75
EXPLANATION OF TERMS FOR MAINTENANCE STANDARD 00-79
STANDARD TIGHTENING TORQUE TABLE 00-82
CONVERSION TABLE 00-89
01 SPECIFICATIONS 01-1
CONTENTS 01-2
ABBREVIATION LIST 01-3
SPECIFICATIONS 01-9
SPECIFICATION DRAWING 01-9
WORKING RANGE DRAWINGS 01-11
SPECIFICATIONS 01-12
WEIGHT TABLE 01-15
TABLE OF FUEL, COOLANT, AND LUBRICANTS 01-17
10 STRUCTURE AND FUNCTION 10-1
CONTENTS 10-2
ABBREVIATION LIST 10-6
UREA SCR SYSTEM 10-12
LAYOUT DRAWING OF UREA SCR SYSTEM 10-12
UREA SCR SYSTEM DIAGRAM 10-16
FUNCTION OF UREA SCR SYSTEM 10-17
COMPONENT PARTS OF UREA SCR SYSTEM 10-33
BOOT-UP SYSTEM 10-42
LAYOUT DRAWING OF BOOT-UP SYSTEM 10-42
SYSTEM OPERATING LAMP SYSTEM 10-44
BATTERY DISCONNECT SWITCH 10-46
ENGINE SYSTEM 10-47
LAYOUT DRAWING OF ENGINE SYSTEM 10-47
ENGINE CONTROL SYSTEM 10-49
AUTO-DECELERATION SYSTEM 10-52
ENGINE AUTOMATIC WARM-UP SYSTEM 10-54
OVERHEAT PREVENTION SYSTEM 10-56
INDEX 00 INDEX AND FOREWORD
00-2 PC360LCI-11
TURBOCHARGER PROTECTION SYSTEM 10-58
AUTOMATIC IDLE STOP SYSTEM 10-60
COMPONENT PARTS OF ENGINE SYSTEM 10-63
COOLING SYSTEM 10-81
LAYOUT DRAWING OF COOLING SYSTEM 10-81
CONTROL SYSTEM 10-83
LAYOUT DRAWING OF CONTROL SYSTEM 10-83
MACHINE MONITOR SYSTEM 10-86
KomVision SYSTEM 10-88
KOMTRAX SYSTEM 10-92
COMPONENT PARTS OF CONTROL SYSTEM 10-93
HYDRAULIC SYSTEM 10-132
LAYOUT DRAWING OF HYDRAULIC SYSTEM 10-132
CLSS 10-135
ENGINE AND PUMP COMBINED CONTROL SYSTEM 10-155
PUMP AND VALVE CONTROL SYSTEM 10-161
COMPONENT PARTS OF HYDRAULIC SYSTEM 10-164
WORK EQUIPMENT SYSTEM 10-257
LAYOUT DRAWING OF WORK EQUIPMENT SYSTEM 10-257
STRUCTURE OF VALVE CONTROL 10-262
ONE-TOUCH POWER MAXIMIZING SYSTEM 10-264
MACHINE PUSH-UP SYSTEM 10-266
PPC LOCK SYSTEM 10-268
WORK EQUIPMENT AND TRAVEL AUTOMATIC LOCK SYSTEM 10-269
OIL FLOW ADJUSTER SYSTEM FOR ATTACHMENT 10-271
TOOL CONTROL SYSTEM 10-273
COMPONENT PARTS OF WORK EQUIPMENT SYSTEM 10-275
ICT SYSTEM 10-300
LAYOUT DRAWING OF ICT SYSTEM 10-300
ICT CONTROL SYSTEM DIAGRAM 10-302
BUCKET EDGE POSITION DETECTION SYSTEM 10-303
THE INTELLIGENT MACHINE CONTROL SYSTEM 10-305
CUSHION SYSTEM FOR ARM IN END 10-321
CUSHION SYSTEM FOR BOOM RAISE END 10-323
BOOM SECONDARY DRIVE SWITCH 10-325
COMPONENT PARTS OF ICT SYSTEM 10-326
SWING SYSTEM 10-360
LAYOUT DRAWING OF SWING SYSTEM 10-360
SWING CONTROL SYSTEM DIAGRAM 10-363
COMPONENT PARTS OF SWING SYSTEM 10-367
TRAVEL SYSTEM 10-383
LAYOUT DRAWING OF TRAVEL SYSTEM 10-383
TRAVEL CONTROL SYSTEM DIAGRAM 10-387
COMPONENT PARTS OF TRAVEL SYSTEM 10-389
UNDERCARRIAGE AND FRAME 10-410
LAYOUT DRAWING OF UNDERCARRIAGE 10-410
WORK EQUIPMENT 10-412
STRUCTURE OF WORK EQUIPMENT 10-412
FUNCTION OF WORK EQUIPMENT 10-413
WORK EQUIPMENT CLEARANCE ADJUSTMENT SHIM 10-414
BUCKET CLEARANCE ADJUSTMENT SHIM 10-415
CAB AND ITS ATTACHMENTS 10-416
ROPS CAB 10-416
CAB MOUNT 10-417
CAB TIPPING STOPPER 10-418
20 STANDARD VALUE TABLE 20-1
CONTENTS 20-2
ABBREVIATION LIST 20-3
00 INDEX AND FOREWORD INDEX
PC360LCI-11 00-3
STANDARD VALUE TABLE FOR ENGINE 20-9
STANDARD VALUE TABLE FOR ENGINE: PC360LCI-11 20-9
STANDARD VALUE TABLE FOR MACHINE 20-14
STANDARD VALUE TABLE FOR MACHINE: PC360LCI-11 20-14
MACHINE POSTURE AND PROCEDURE FOR MEASURING PERFORMANCE 20-37
STANDARD VALUE TABLE FOR ELECTRICAL 20-41
STANDARD VALUE TABLE FOR ELECTRICAL 20-41
30 TESTING AND ADJUSTING 30-1
CONTENTS 30-2
ABBREVIATION LIST 30-6
RELATED INFORMATION ON TESTING AND ADJUSTING 30-12
TOOLS FOR TESTING AND ADJUSTING 30-12
SKETCH OF TOOLS FOR TESTING AND ADJUSTING 30-23
ENGINE AND COOLING SYSTEM 30-25
TEST ENGINE SPEED 30-25
TEST BOOST PRESSURE 30-29
TEST EXHAUST GAS COLOR 30-31
TEST AND ADJUST VALVE CLEARANCE 30-33
TEST COMPRESSION PRESSURE 30-36
TEST BLOWBY PRESSURE 30-39
TEST ENGINE OIL PRESSURE 30-41
TEST EGR VALVE AND VGT OIL PRESSURE 30-43
TEST FUEL PRESSURE 30-45
TEST FUEL DISCHARGE, RETURN AND LEAKAGE 30-52
BLEED AIR FROM FUEL SYSTEM 30-59
TEST FUEL CIRCUIT FOR LEAKAGE 30-60
HANDLE CYLINDER CUT-OUT MODE OPERATION 30-62
HANDLE NO-INJECTION CRANKING OPERATION 30-63
TEST AND ADJUST AIR CONDITIONER COMPRESSOR BELT TENSION 30-64
TEST FAN BELT AND ALTERNATOR BELT 30-65
TEST AUTO-TENSIONER 30-66
WRITE ASH IN SOOT ACCUMULATION CORRECTION TO ENGINE CONTROLLER 30-67
TEST SCR RELATED FUNCTIONS 30-68
CLEAN AdBlue/DEF TANK 30-96
POWER TRAIN 30-100
TEST SWING CIRCLE BEARING CLEARANCE 30-100
UNDERCARRIAGE AND FRAME 30-101
TEST AND ADJUST TRACK TENSION 30-101
HYDRAULIC SYSTEM 30-103
RELEASE REMAINING PRESSURE FROM HYDRAULIC SYSTEM 30-103
TEST AND ADJUST OIL PRESSURE IN WORK EQUIPMENT, SWING, AND TRAVEL CIRCUITS
30-109
TEST OIL PRESSURE OF CONTROL CIRCUIT 30-122
TEST AND ADJUST OIL PRESSURE IN PUMP PC CONTROL CIRCUIT 30-124
TEST AND ADJUST OIL PRESSURE IN PUMP LS CONTROL CIRCUIT 30-127
TEST OUTLET PRESSURE OF SOLENOID VALVE 30-132
TEST PPC VALVE OUTPUT PRESSURE 30-135
ADJUST WORK EQUIPMENT AND SWING PPC VALVES 30-137
TEST PUMP SWASH PLATE SENSOR 30-138
TEST THE PARTS CAUSING HYDRAULIC DRIFT IN WORK EQUIPMENT 30-139
TEST OIL LEAKAGE 30-141
BLEED AIR FROM HYDRAULIC CIRCUIT 30-144
TEST AND CHARGE ACCUMULATOR (MANUFACTURED BY NOK) NITROGEN GAS PRESSURE
FOR ATTACHMENT (LOW PRESSURE SIDE) 30-149
TEST AND CHARGE ACCUMULATOR NITROGEN GAS PRESSURE FOR ATTACHMENT (HIGH
PRESSURE SIDE) 30-153
REPLACE ACCUMULATOR BLADDER ON HIGH PRESSURE SIDE FOR ACCUMULATOR PIPING
30-157
INDEX 00 INDEX AND FOREWORD
00-4 PC360LCI-11
CAB AND ITS ATTACHMENTS 30-164
TEST CAB TIPPING STOPPER 30-164
METHOD FOR ADJUSTING MIRRORS 30-165
ELECTRICAL SYSTEM 30-170
SET AND OPERATE MACHINE MONITOR 30-170
METHOD FOR STARTING UP KOMTRAX TERMINAL 30-253
ADJUST REARVIEW CAMERA ANGLE 30-258
ADJUST KomVision CAMERA ANGLE 30-261
ADJUST KomVision RELATED ITEMS 30-266
HANDLE VOLTAGE CIRCUIT OF ENGINE CONTROLLER 30-286
HANDLE BATTERY DISCONNECT SWITCH 30-287
TEST DIODES 30-288
ICT SYSTEM 30-289
SET AND OPERATE CONTROL BOX 30-289
CALIBRATE INTELLIGENT MACHINE CONTROL 30-298
Pm CLINIC 30-727
Pm CLINIC SERVICE 30-727
40 TROUBLESHOOTING 40-1
CONTENTS 40-2
ABBREVIATION LIST 40-15
RELATED INFORMATION ON TROUBLESHOOTING 40-21
GENERAL TROUBLESHOOTING POINTS 40-21
TROUBLESHOOTING POINTS FOR UREA SCR SYSTEM 40-22
SEQUENCE OF EVENTS IN TROUBLESHOOTING 40-34
CHECKS BEFORE TROUBLESHOOTING 40-36
INSPECTION PROCEDURE BEFORE TROUBLESHOOTING 40-38
TESTING IN ACCORDANCE WITH TESTING PROCEDURE 40-40
PREPARATION FOR TROUBLESHOOTING OF ELECTRICAL SYSTEM 40-60
PROCEDURE FOR TESTING AND TROUBLESHOOTING 40-67
SYMPTOMS OF FAILURE AND TROUBLESHOOTING NUMBERS 40-70
INFORMATION DESCRIBED IN TROUBLESHOOTING TABLE 40-75
TROUBLESHOOTING METHOD FOR OPEN CIRCUIT IN WIRING HARNESS OF PRESSURE SENSOR
SYSTEM 40-77
CONNECTOR LIST AND LAYOUT 40-80
CONNECTOR CONTACT IDENTIFICATION 40-100
T-BRANCH BOX AND T-BRANCH ADAPTER TABLE 40-140
FUSE LOCATION TABLE 40-146
PRECAUTIONS FOR CLEANING AND REPLACING KDPF (KCSF and KDOC) 40-149
PREPARATION OF SHORT CIRCUIT ELECTRICAL CONNECTOR (FOR FAILURE CODES [CA1883]
AND [CA3135]) 40-153
FAILURE CODES TABLE 40-155
TROUBLESHOOTING BY FAILURE CODE (DISPLAY OF CODE) 40-177
FAILURE CODE [879AKA] 40-177
FAILURE CODE [879AKB] 40-178
FAILURE CODE [879BKA] 40-179
FAILURE CODE [879BKB] 40-181
FAILURE CODE [879CKA] 40-183
FAILURE CODE [879CKB] 40-184
FAILURE CODE [879DKZ] 40-185
FAILURE CODE [879EMC] 40-187
FAILURE CODE [879FMC] 40-188
FAILURE CODE [879GKX] 40-189
FAILURE CODE [989L00] 40-191
FAILURE CODE [989M00] 40-192
FAILURE CODE [989N00] 40-193
FAILURE CODE [A1U0N3] 40-194
FAILURE CODE [A1U0N4] 40-196
FAILURE CODE [A900FR] 40-198
00 INDEX AND FOREWORD INDEX
PC360LCI-11 00-5
FAILURE CODE [A900N6] 40-199
FAILURE CODE [A900NY] 40-200
FAILURE CODE [AA10NX] 40-201
FAILURE CODE [AB00KE] 40-203
FAILURE CODE [AQ10N3] 40-206
FAILURE CODE [AS00N3] 40-208
FAILURE CODE [AS00R2] 40-210
FAILURE CODE [AS00R3] 40-211
FAILURE CODE [AS00R4] 40-212
FAILURE CODE [AS00R5] 40-213
FAILURE CODE [AS00R6] 40-214
FAILURE CODE [AS00ZK] 40-215
FAILURE CODE [AS10KM] 40-216
FAILURE CODE [AS10NR] 40-217
FAILURE CODE [AS10NT] 40-218
FAILURE CODE [B@BAZG] 40-219
FAILURE CODE [B@BAZK] 40-220
FAILURE CODE [B@BCNS] 40-222
FAILURE CODE [B@BCQA] 40-223
FAILURE CODE [B@BCZK] 40-225
FAILURE CODE [B@HANS] 40-227
FAILURE CODE [CA115] 40-228
FAILURE CODE [CA122] 40-229
FAILURE CODE [CA123] 40-231
FAILURE CODE [CA131] 40-233
FAILURE CODE [CA132] 40-235
FAILURE CODE [CA144] 40-237
FAILURE CODE [CA145] 40-239
FAILURE CODE [CA153] 40-241
FAILURE CODE [CA154] 40-244
FAILURE CODE [CA187] 40-247
FAILURE CODE [CA221] 40-249
FAILURE CODE [CA222] 40-251
FAILURE CODE [CA227] 40-253
FAILURE CODE [CA234] 40-254
FAILURE CODE [CA238] 40-255
FAILURE CODE [CA239] 40-257
FAILURE CODE [CA249] 40-259
FAILURE CODE [CA256] 40-261
FAILURE CODE [CA271] 40-263
FAILURE CODE [CA272] 40-265
FAILURE CODE [CA281] 40-267
FAILURE CODE [CA322] 40-268
FAILURE CODE [CA323] 40-270
FAILURE CODE [CA324] 40-272
FAILURE CODE [CA325] 40-274
FAILURE CODE [CA331] 40-276
FAILURE CODE [CA332] 40-278
FAILURE CODE [CA343] 40-280
FAILURE CODE [CA351] 40-281
FAILURE CODE [CA352] 40-282
FAILURE CODE [CA356] 40-285
FAILURE CODE [CA357] 40-287
FAILURE CODE [CA386] 40-289
FAILURE CODE [CA428] 40-290
FAILURE CODE [CA429] 40-292
FAILURE CODE [CA435] 40-294
FAILURE CODE [CA441] 40-296
INDEX 00 INDEX AND FOREWORD
00-6 PC360LCI-11
FAILURE CODE [CA442] 40-298
FAILURE CODE [CA449] 40-299
FAILURE CODE [CA451] 40-303
FAILURE CODE [CA452] 40-306
FAILURE CODE [CA488] 40-308
FAILURE CODE [CA515] 40-309
FAILURE CODE [CA516] 40-311
FAILURE CODE [CA553] 40-313
FAILURE CODE [CA555] 40-314
FAILURE CODE [CA556] 40-315
FAILURE CODE [CA559] 40-316
FAILURE CODE [CA595] 40-320
FAILURE CODE [CA687] 40-321
FAILURE CODE [CA689] 40-323
FAILURE CODE [CA691] 40-328
FAILURE CODE [CA692] 40-330
FAILURE CODE [CA697] 40-332
FAILURE CODE [CA698] 40-333
FAILURE CODE [CA731] 40-334
FAILURE CODE [CA778] 40-336
FAILURE CODE [CA1117] 40-341
FAILURE CODE [CA1664] 40-342
FAILURE CODE [CA1669] 40-344
FAILURE CODE [CA1673] 40-345
FAILURE CODE [CA1677] 40-346
FAILURE CODE [CA1678] 40-347
FAILURE CODE [CA1682] 40-348
FAILURE CODE [CA1683] 40-350
FAILURE CODE [CA1684] 40-352
FAILURE CODE [CA1686] 40-354
FAILURE CODE [CA1691] 40-355
FAILURE CODE [CA1694] 40-358
FAILURE CODE [CA1695] 40-361
FAILURE CODE [CA1696] 40-362
FAILURE CODE [CA1712] 40-364
FAILURE CODE [CA1713] 40-367
FAILURE CODE [CA1714] 40-369
FAILURE CODE [CA1715] 40-370
FAILURE CODE [CA1776] 40-371
FAILURE CODE [CA1777] 40-374
FAILURE CODE [CA1843] 40-377
FAILURE CODE [CA1844] 40-379
FAILURE CODE [CA1879] 40-382
FAILURE CODE [CA1881] 40-385
FAILURE CODE [CA1883] 40-387
FAILURE CODE [CA1885] 40-390
FAILURE CODE [CA1887] 40-392
FAILURE CODE [CA1921] 40-394
FAILURE CODE [CA1922] 40-397
FAILURE CODE [CA1942] 40-402
FAILURE CODE [CA1993] 40-403
FAILURE CODE [CA2185] 40-406
FAILURE CODE [CA2186] 40-408
FAILURE CODE [CA2249] 40-410
FAILURE CODE [CA2265] 40-411
FAILURE CODE [CA2266] 40-413
FAILURE CODE [CA2271] 40-415
FAILURE CODE [CA2272] 40-418
00 INDEX AND FOREWORD INDEX
PC360LCI-11 00-7
FAILURE CODE [CA2288] 40-421
FAILURE CODE [CA2311] 40-422
FAILURE CODE [CA2349] 40-423
FAILURE CODE [CA2353] 40-426
FAILURE CODE [CA2357] 40-428
FAILURE CODE [CA2381] 40-429
FAILURE CODE [CA2382] 40-432
FAILURE CODE [CA2383] 40-435
FAILURE CODE [CA2386] 40-438
FAILURE CODE [CA2387] 40-440
FAILURE CODE [CA2555] 40-441
FAILURE CODE [CA2556] 40-444
FAILURE CODE [CA2637] 40-447
FAILURE CODE [CA2639] 40-449
FAILURE CODE [CA2771] 40-452
FAILURE CODE [CA2777] 40-458
FAILURE CODE [CA2976] 40-461
FAILURE CODE [CA3133] 40-463
FAILURE CODE [CA3134] 40-465
FAILURE CODE [CA3135] 40-467
FAILURE CODE [CA3142] 40-470
FAILURE CODE [CA3143] 40-471
FAILURE CODE [CA3144] 40-472
FAILURE CODE [CA3146] 40-474
FAILURE CODE [CA3147] 40-475
FAILURE CODE [CA3148] 40-476
FAILURE CODE [CA3151] 40-478
FAILURE CODE [CA3165] 40-484
FAILURE CODE [CA3229] 40-486
FAILURE CODE [CA3231] 40-488
FAILURE CODE [CA3232] 40-490
FAILURE CODE [CA3235] 40-494
FAILURE CODE [CA3239] 40-496
FAILURE CODE [CA3241] 40-499
FAILURE CODE [CA3242] 40-502
FAILURE CODE [CA3251] 40-505
FAILURE CODE [CA3253] 40-507
FAILURE CODE [CA3254] 40-510
FAILURE CODE [CA3255] 40-513
FAILURE CODE [CA3256] 40-517
FAILURE CODE [CA3311] 40-519
FAILURE CODE [CA3312] 40-521
FAILURE CODE [CA3313] 40-524
FAILURE CODE [CA3314] 40-525
FAILURE CODE [CA3315] 40-526
FAILURE CODE [CA3316] 40-528
FAILURE CODE [CA3317] 40-529
FAILURE CODE [CA3318] 40-530
FAILURE CODE [CA3319] 40-532
FAILURE CODE [CA3321] 40-533
FAILURE CODE [CA3322] 40-535
FAILURE CODE [CA3419] 40-537
FAILURE CODE [CA3421] 40-539
FAILURE CODE [CA3497] 40-541
FAILURE CODE [CA3498] 40-542
FAILURE CODE [CA3543] 40-543
FAILURE CODE [CA3545] 40-550
FAILURE CODE [CA3547] 40-552
INDEX 00 INDEX AND FOREWORD
00-8 PC360LCI-11
FAILURE CODE [CA3558] 40-553
FAILURE CODE [CA3559] 40-555
FAILURE CODE [CA3562] 40-557
FAILURE CODE [CA3563] 40-559
FAILURE CODE [CA3567] 40-562
FAILURE CODE [CA3568] 40-565
FAILURE CODE [CA3571] 40-569
FAILURE CODE [CA3572] 40-571
FAILURE CODE [CA3574] 40-573
FAILURE CODE [CA3575] 40-575
FAILURE CODE [CA3577] 40-577
FAILURE CODE [CA3578] 40-579
FAILURE CODE [CA3582] 40-581
FAILURE CODE [CA3583] 40-587
FAILURE CODE [CA3596] 40-589
FAILURE CODE [CA3649] 40-591
FAILURE CODE [CA3681] 40-593
FAILURE CODE [CA3682] 40-598
FAILURE CODE [CA3713] 40-604
FAILURE CODE [CA3717] 40-607
FAILURE CODE [CA3718] 40-608
FAILURE CODE [CA3725] 40-609
FAILURE CODE [CA3741] 40-612
FAILURE CODE [CA3748] 40-613
FAILURE CODE [CA3751] 40-615
FAILURE CODE [CA3755] 40-617
FAILURE CODE [CA3866] 40-619
FAILURE CODE [CA3867] 40-623
FAILURE CODE [CA3868] 40-626
FAILURE CODE [CA3899] 40-630
FAILURE CODE [CA3911] 40-632
FAILURE CODE [CA3912] 40-636
FAILURE CODE [CA3932] 40-638
FAILURE CODE [CA3933] 40-640
FAILURE CODE [CA3934] 40-642
FAILURE CODE [CA3935] 40-645
FAILURE CODE [CA3936] 40-647
FAILURE CODE [CA4151] 40-649
FAILURE CODE [CA4152] 40-653
FAILURE CODE [CA4155] 40-657
FAILURE CODE [CA4156] 40-659
FAILURE CODE [CA4157] 40-662
FAILURE CODE [CA4158] 40-664
FAILURE CODE [CA4159] 40-665
FAILURE CODE [CA4161] 40-666
FAILURE CODE [CA4162] 40-669
FAILURE CODE [CA4163] 40-672
FAILURE CODE [CA4164] 40-674
FAILURE CODE [CA4165] 40-676
FAILURE CODE [CA4166] 40-678
FAILURE CODE [CA4168] 40-680
FAILURE CODE [CA4169] 40-683
FAILURE CODE [CA4171] 40-685
FAILURE CODE [CA4249] 40-688
FAILURE CODE [CA4251] 40-690
FAILURE CODE [CA4259] 40-692
FAILURE CODE [CA4261] 40-695
FAILURE CODE [CA4277] 40-698
00 INDEX AND FOREWORD INDEX
PC360LCI-11 00-9
FAILURE CODE [CA4281] 40-702
FAILURE CODE [CA4459] 40-705
FAILURE CODE [CA4461] 40-708
FAILURE CODE [CA4658] 40-711
FAILURE CODE [CA4731] 40-715
FAILURE CODE [CA4732] 40-716
FAILURE CODE [CA4739] 40-717
FAILURE CODE [CA4768] 40-718
FAILURE CODE [CA4769] 40-720
FAILURE CODE [CA4842] 40-723
FAILURE CODE [CA4952] 40-727
FAILURE CODE [CA5115] 40-729
FAILURE CODE [CA5179] 40-732
FAILURE CODE [CA5181] 40-734
FAILURE CODE [CA5383] 40-736
FAILURE CODE [D110KB] 40-738
FAILURE CODE [D19JKZ] 40-740
FAILURE CODE [D811MC] 40-742
FAILURE CODE [D862KA] 40-743
FAILURE CODE [D8ALKA] 40-744
FAILURE CODE [D8ALKB] 40-746
FAILURE CODE [D8AQKR] 40-748
FAILURE CODE [DA20MC] 40-756
FAILURE CODE [DA22KK] 40-757
FAILURE CODE [DA25KP] 40-760
FAILURE CODE [DA29KQ] 40-763
FAILURE CODE [DA2LKA] 40-765
FAILURE CODE [DA2LKB] 40-767
FAILURE CODE [DA2QKR] 40-769
FAILURE CODE [DA2RKR] 40-778
FAILURE CODE [DAF0MB] 40-787
FAILURE CODE [DAF0MC] 40-788
FAILURE CODE [DAF8KB] 40-789
FAILURE CODE [DAF9KQ] 40-791
FAILURE CODE [DAFGMC] 40-792
FAILURE CODE [DAFLKA] 40-793
FAILURE CODE [DAFLKB] 40-795
FAILURE CODE [DAFQKR] 40-797
FAILURE CODE [DAZ9KQ] 40-805
FAILURE CODE [DAZQKR] 40-806
FAILURE CODE [DB2QKR] 40-814
FAILURE CODE [DB2RKR] 40-822
FAILURE CODE [DB90MC] 40-830
FAILURE CODE [DB92KK] 40-831
FAILURE CODE [DB95KP] 40-833
FAILURE CODE [DB96KP] 40-837
FAILURE CODE [DB99KQ] 40-841
FAILURE CODE [DB9LKA] 40-844
FAILURE CODE [DB9LKB] 40-846
FAILURE CODE [DB9QKR] 40-848
FAILURE CODE [DB9RKR] 40-857
FAILURE CODE [DBP0KM] 40-866
FAILURE CODE [DBP0KT] 40-867
FAILURE CODE [DBPQKR] 40-868
FAILURE CODE [DBR0MC] 40-878
FAILURE CODE [DBR2KK] 40-879
FAILURE CODE [DBR5KP] 40-882
FAILURE CODE [DBR6KP] 40-884
INDEX 00 INDEX AND FOREWORD
00-10 PC360LCI-11
FAILURE CODE [DBR9KQ] 40-886
FAILURE CODE [DBRLKA] 40-889
FAILURE CODE [DBRLKB] 40-891
FAILURE CODE [DBRQKR] 40-893
FAILURE CODE [DBRRKR] 40-902
FAILURE CODE [DBRSKB] 40-911
FAILURE CODE [DBRTKB] 40-913
FAILURE CODE [DBUSKR] 40-915
FAILURE CODE [DD20MA] 40-919
FAILURE CODE [DDNRKA] 40-922
FAILURE CODE [DDNRKY] 40-924
FAILURE CODE [DDNS00] 40-926
FAILURE CODE [DGH2KB] 40-928
FAILURE CODE [DHA4KA] 40-930
FAILURE CODE [DHAAMA] 40-932
FAILURE CODE [DHACMA] 40-934
FAILURE CODE [DHPAMA] 40-936
FAILURE CODE [DHPBMA] 40-939
FAILURE CODE [DHS3MA] 40-942
FAILURE CODE [DHS4MA] 40-945
FAILURE CODE [DHS8MA] 40-948
FAILURE CODE [DHS9MA] 40-951
FAILURE CODE [DHSAMA] 40-954
FAILURE CODE [DHSBMA] 40-957
FAILURE CODE [DHSCMA] 40-960
FAILURE CODE [DHSDMA] 40-963
FAILURE CODE [DHSFMA] 40-966
FAILURE CODE [DHSGMA] 40-969
FAILURE CODE [DHSHMA] 40-972
FAILURE CODE [DHSJMA] 40-975
FAILURE CODE [DHZAMA] 40-978
FAILURE CODE [DHZCL8] 40-982
FAILURE CODE [DK80KM] 40-983
FAILURE CODE [DK80KR] 40-984
FAILURE CODE [DK80KT] 40-990
FAILURE CODE [DKG1KM] 40-991
FAILURE CODE [DKG1L8] 40-992
FAILURE CODE [DKR0MA] 40-993
FAILURE CODE [DKR1MA] 40-996
FAILURE CODE [DKT0KM] 40-999
FAILURE CODE [DKT0L8] 40-1000
FAILURE CODE [DKT1KA] 40-1001
FAILURE CODE [DKT1KB] 40-1003
FAILURE CODE [DKT2KA] 40-1005
FAILURE CODE [DKT2KB] 40-1007
FAILURE CODE [DKT4KM] 40-1009
FAILURE CODE [DKT4L8] 40-1010
FAILURE CODE [DKT5KA] 40-1011
FAILURE CODE [DKT5KB] 40-1013
FAILURE CODE [DKT6KA] 40-1015
FAILURE CODE [DKT6KB] 40-1017
FAILURE CODE [DKT8KA] 40-1019
FAILURE CODE [DKT8KB] 40-1021
FAILURE CODE [DKT9KA] 40-1023
FAILURE CODE [DKT9KB] 40-1025
FAILURE CODE [DKTAKA] 40-1027
FAILURE CODE [DKTAKB] 40-1029
FAILURE CODE [DKTAMB] 40-1031
00 INDEX AND FOREWORD INDEX
PC360LCI-11 00-11
FAILURE CODE [DKTBKX] 40-1032
FAILURE CODE [DKTBMC] 40-1034
FAILURE CODE [DKTEMB] 40-1035
FAILURE CODE [DKTFKX] 40-1037
FAILURE CODE [DKTFMC] 40-1039
FAILURE CODE [DKTJMB] 40-1040
FAILURE CODE [DKU1MA] 40-1042
FAILURE CODE [DKU2MA] 40-1043
FAILURE CODE [DKUGKA] 40-1044
FAILURE CODE [DKUGKB] 40-1046
FAILURE CODE [DKUGKY] 40-1048
FAILURE CODE [DKUHKA] 40-1050
FAILURE CODE [DKUHKB] 40-1052
FAILURE CODE [DKUHKY] 40-1054
FAILURE CODE [DKULKA] 40-1056
FAILURE CODE [DKULKB] 40-1058
FAILURE CODE [DKULKY] 40-1060
FAILURE CODE [DKV0KA] 40-1062
FAILURE CODE [DKV0KY] 40-1065
FAILURE CODE [DKV1KA] 40-1067
FAILURE CODE [DKV1KY] 40-1069
FAILURE CODE [DKV2KA] 40-1071
FAILURE CODE [DKV2KY] 40-1073
FAILURE CODE [DKV3KA] 40-1075
FAILURE CODE [DKV3KY] 40-1077
FAILURE CODE [DKV4MA] 40-1079
FAILURE CODE [DKV5MA] 40-1082
FAILURE CODE [DKV6MA] 40-1085
FAILURE CODE [DKV7MA] 40-1088
FAILURE CODE [DKV8MA] 40-1091
FAILURE CODE [DKV9MA] 40-1094
FAILURE CODE [DKVAMA] 40-1097
FAILURE CODE [DKVBKA] 40-1100
FAILURE CODE [DKVBKB] 40-1102
FAILURE CODE [DKVBKY] 40-1104
FAILURE CODE [DKVCKA] 40-1106
FAILURE CODE [DKVCKB] 40-1108
FAILURE CODE [DKVCKY] 40-1110
FAILURE CODE [DKVDKA] 40-1112
FAILURE CODE [DKVDKB] 40-1114
FAILURE CODE [DKVDKY] 40-1116
FAILURE CODE [DKVDMA] 40-1118
FAILURE CODE [DR10KA] 40-1119
FAILURE CODE [DR21KX] 40-1122
FAILURE CODE [DR31KX] 40-1124
FAILURE CODE [DUMBKA] 40-1126
FAILURE CODE [DUMBKB] 40-1128
FAILURE CODE [DV20KB] 40-1130
FAILURE CODE [DW43KA] 40-1132
FAILURE CODE [DW43KB] 40-1134
FAILURE CODE [DW43KY] 40-1136
FAILURE CODE [DW45KA] 40-1138
FAILURE CODE [DW45KB] 40-1141
FAILURE CODE [DW45KY] 40-1144
FAILURE CODE [DW4CKY] 40-1146
FAILURE CODE [DW4FKA] 40-1147
FAILURE CODE [DW4FKB] 40-1150
FAILURE CODE [DW4FKY] 40-1152
INDEX 00 INDEX AND FOREWORD
00-12 PC360LCI-11
FAILURE CODE [DW4GKA] 40-1154
FAILURE CODE [DW4GKB] 40-1157
FAILURE CODE [DW4GKY] 40-1159
FAILURE CODE [DW4SKA] 40-1161
FAILURE CODE [DW4SKB] 40-1163
FAILURE CODE [DW4SKY] 40-1165
FAILURE CODE [DW91KA] 40-1167
FAILURE CODE [DW91KB] 40-1169
FAILURE CODE [DW91KY] 40-1171
FAILURE CODE [DWA2KA] 40-1173
FAILURE CODE [DWA2KB] 40-1175
FAILURE CODE [DWA2KY] 40-1177
FAILURE CODE [DWK0KA] 40-1179
FAILURE CODE [DWK0KB] 40-1181
FAILURE CODE [DWK0KY] 40-1183
FAILURE CODE [DWK2KA] 40-1185
FAILURE CODE [DWK2KB] 40-1187
FAILURE CODE [DWK2KY] 40-1189
FAILURE CODE [DWK8KA] 40-1191
FAILURE CODE [DWK8KB] 40-1193
FAILURE CODE [DWK8KY] 40-1195
FAILURE CODE [DWPUKA] 40-1197
FAILURE CODE [DWPUKB] 40-1199
FAILURE CODE [DWPUKY] 40-1201
FAILURE CODE [DXA8KA] 40-1203
FAILURE CODE [DXA8KB] 40-1206
FAILURE CODE [DXA9KA] 40-1208
FAILURE CODE [DXA9KB] 40-1211
FAILURE CODE [DXE0KA] 40-1213
FAILURE CODE [DXE0KB] 40-1215
FAILURE CODE [DXE4KA] 40-1217
FAILURE CODE [DXE4KB] 40-1219
FAILURE CODE [DXE4KY] 40-1221
FAILURE CODE [DXE5KA] 40-1222
FAILURE CODE [DXE5KB] 40-1224
FAILURE CODE [DXE6KA] 40-1226
FAILURE CODE [DXE6KB] 40-1228
FAILURE CODE [DXE7KA] 40-1230
FAILURE CODE [DXE7KB] 40-1232
FAILURE CODE [DXE7KY] 40-1234
FAILURE CODE [DXE8KA] 40-1236
FAILURE CODE [DXE8KB] 40-1238
FAILURE CODE [DXE8KY] 40-1240
FAILURE CODE [DXE9KA] 40-1242
FAILURE CODE [DXE9KB] 40-1244
FAILURE CODE [DXE9KY] 40-1246
FAILURE CODE [DXEAKA] 40-1248
FAILURE CODE [DXEAKB] 40-1250
FAILURE CODE [DXEAKY] 40-1252
FAILURE CODE [DXEKKA] 40-1254
FAILURE CODE [DXEKKB] 40-1256
FAILURE CODE [DXEKKY] 40-1258
FAILURE CODE [DXELKA] 40-1260
FAILURE CODE [DXELKB] 40-1262
FAILURE CODE [DXELKY] 40-1264
FAILURE CODE [DY20KA] 40-1266
FAILURE CODE [DY20MA] 40-1269
FAILURE CODE [DY2CKB] 40-1271
00 INDEX AND FOREWORD INDEX
PC360LCI-11 00-13
FAILURE CODE [DY2DKB] 40-1274
FAILURE CODE [DY2EKB] 40-1276
TROUBLESHOOTING OF ELECTRICAL SYSTEM (E-MODE) 40-1278
E-1 ENGINE DOES NOT START (ENGINE DOES NOT CRANK) 40-1278
E-2 MANUAL PREHEATING SYSTEM DOES NOT WORK 40-1284
E-3 AUTOMATIC PREHEATING SYSTEM DOES NOT WORK 40-1287
E-4 WHILE PREHEATING IS WORKING, PREHEATING MONITOR DOES NOT LIGHT UP 40-1289
E-5 WHEN STARTING SWITCH IS TURNED TO ON POSITION, MACHINE MONITOR DISPLAYS
NOTHING 40-1291
E-6 WHILE STARTING SWITCH IS TURNED TO ON POSITION (WITH ENGINE STOPPED), ENGINE
OIL LEVEL MONITOR LIGHTS UP IN YELLOW 40-1294
E-7 WHILE STARTING SWITCH IS TURNED TO ON POSITION (WITH ENGINE STOPPED), RADIATOR
COOLANT LEVEL MONITOR LIGHTS UP IN YELLOW 40-1295
E-8 ENGINE COOLANT TEMPERATURE MONITOR LIGHTS UP IN WHITE WHILE ENGINE IS RUNNING
40-1296
E-9 HYDRAULIC OIL TEMPERATURE MONITOR LIGHTS UP IN WHITE WHILE ENGINE IS RUNNING
40-1297
E-10 AIR CLEANER CLOGGING MONITOR LIGHTS UP IN YELLOW WHILE ENGINE IS RUNNING
40-1298
E-11 CHARGE LEVEL MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING 40-1299
E-12 FUEL LEVEL MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING 40-1300
E-13 WATER SEPARATOR MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING 40-1301
E-14 ENGINE COOLANT TEMPERATURE MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING
40-1302
E-15 ENGINE OIL PRESSURE MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING 40-1303
E-16 HYDRAULIC OIL TEMPERATURE MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING
40-1304
E-17 FUEL GAUGE DISPLAY DOES NOT MOVE FROM MINIMUM OR MAXIMUM 40-1305
E-18 DISPLAY OF FUEL GAUGE DIFFERS FROM ACTUAL FUEL LEVEL 40-1307
E-19 ENGINE COOLANT TEMPERATURE GAUGE DISPLAY DOES NOT MOVE FROM MINIMUM
OR MAXIMUM 40-1308
E-20 DISPLAY OF ENGINE COOLANT TEMPERATURE GAUGE DIFFERS FROM ACTUAL COOLANT
TEMPERATURE 40-1309
E-21 HYDRAULIC OIL TEMPERATURE GAUGE DISPLAY DOES NOT MOVE FROM MINIMUM OR
MAXIMUM 40-1310
E-22 DISPLAY OF HYDRAULIC OIL TEMPERATURE GAUGE DIFFERS FROM ACTUAL OIL TEMPERATURE
40-1312
E-23 SOME AREAS OF MACHINE MONITOR SCREEN ARE NOT DISPLAYED 40-1313
E-24 FUNCTION SWITCH DOES NOT OPERATE 40-1314
E-25 AUTOMATIC WARM-UP SYSTEM DOES NOT WORK (IN COLD WEATHER) 40-1315
E-26 WHEN AUTO-DECELERATOR SWITCH IS OPERATED, AUTO-DECELERATOR MONITOR
DOES NOT LIGHT UP OR DOES NOT GO OFF 40-1316
E-27 AUTO-DECELERATOR IS NOT OPERATED OR CANCELED WITH LEVER 40-1317
E-28 WHEN WORKING MODE SWITCH IS OPERATED, WORKING MODE SELECTION SCREEN IS
NOT DISPLAYED 40-1318
E-29 WHEN WORKING MODE IS CHANGED, SETTING OF ENGINE AND HYDRAULIC PUMP IS
NOT CHANGED 40-1319
E-30 WHEN TRAVEL SPEED SWITCH IS OPERATED, TRAVEL SPEED MONITOR DOES NOT
CHANGE 40-1320
E-31 WHEN TRAVEL SPEED SELECTION IS CHANGED, ACTUAL TRAVEL SPEED DOES NOT
CHANGE 40-1321
E-32 ALARM BUZZER CANNOT BE CANCELED 40-1323
E-33 SERVICE METER IS NOT DISPLAYED, WHILE STARTING SWITCH IS IN OFF POSITION
40-1324
E-34 SERVICE MODE CANNOT BE SELECTED 40-1325
E-35 ALL OF WORK EQUIPMENTS, SWING, AND TRAVEL MECHANISM DO NOT MOVE 40-1326
E-36 ALL OF WORK EQUIPMENT, SWING, AND TRAVEL MECHANISM DO NOT LOCK 40-1328
INDEX 00 INDEX AND FOREWORD
00-14 PC360LCI-11
E-37 WHEN SWING BRAKE CANCEL SWITCH IS SET TO CANCEL POSITION, MACHINE CANNOT
SWING 40-1329
E-38 WHEN SWING BRAKE CANCEL SWITCH IS SET TO NORMAL POSITION, SWING HOLDING
BRAKE DOES NOT OPERATE 40-1332
E-39 ONE-TOUCH POWER MAXIMIZING FUNCTION DOES NOT OPERATE PROPERLY, OR INDICATOR
NOT DISPLAYED ON MONITOR 40-1334
E-40 ONE-TOUCH POWER MAXIMIZING FUNCTION IS NOT CANCELLED 40-1336
E-41 ALARM DOES NOT SOUND DURING TRAVEL 40-1337
E-42 ALARM DOES NOT STOP SOUNDING WHILE MACHINE IS STOPPED 40-1339
E-43 HORN DOES NOT SOUND 40-1340
E-44 HORN DOES NOT STOP SOUNDING 40-1344
E-45 WHEN WIPER SWITCH IS OPERATED, WIPER MONITOR DOES NOT LIGHT UP OR GO OFF
40-1346
E-46 WHEN WIPER SWITCH IS OPERATED, WINDSHIELD WIPER DOES NOT OPERATE 40-1347
E-47 WHEN WINDOW WASHER SWITCH IS OPERATED, WINDOW WASHER DOES NOT OPERATE
40-1349
E-48 BOOM RAISE INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION
40-1350
E-49 BOOM LOWER INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION
40-1351
E-50 ARM OUT INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION
40-1352
E-51 ARM IN INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION 40-1353
E-52 BUCKET DUMP INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION
40-1354
E-53 BUCKET CURL INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION
40-1355
E-54 SWING INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION 40-1356
E-55 TRAVEL INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION40-1357
E-56 SERVICE INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION
40-1358
E-57 ATTACHMENT HYDRAULIC CIRCUIT CANNOT BE CHANGED 40-1360
E-58 KOMTRAX SYSTEM DOES NOT OPERATE NORMALLY 40-1361
E-59 MACHINE PUSH-UP FUNCTION CANNOT BE CANCELED 40-1362
E-60 MACHINE PUSH-UP FUNCTION DOES NOT OPERATE 40-1364
E-61 CONTROL BOX SHUTS DOWN AFTER DISPLAYING THE MESSAGES [GPS receiver not connected
!] AND [Slope sensor not connected !] 40-1365
E-62 CONTROL BOX DISPLAYS THE MESSAGE [GPS receiver not connected!] 40-1370
E-63 CONTROL BOX DISPLAYS THE MESSAGE [Waiting for radio link ] 40-1374
E-64 CONTROL BOX DISPLAYS THE MESSAGE [Tilt Bucket Sensor Offline!] 40-1375
E-65 CONTROL BOX DISPLAYS THE MESSAGE [Waiting for satellites ] 40-1376
E-66 CONTROL BOX DISPLAYS THE MESSAGE [Komatsu controller not connected!] 40-1377
E-67 CONTROL BOX DISPLAYS THE MESSAGE [Sensors are invalid] 40-1380
E-68 CONTROL BOX DISPLAYS THE MESSAGE [Waiting to initialize ] 40-1383
E-69 CONTROL BOX DISPLAYS THE MESSAGE [Initializing ] 40-1384
E-70 CONTROL BOX DISPLAYS THE MESSAGE [No GPS Localization ] 40-1385
E-71 CONTROL BOX DISPLAYS THE MESSAGE [Low precisions ] 40-1386
E-72 CONTROL BOX DISPLAYS [Out of design area ] 40-1387
E-73 CONTROL BOX DISPLAYS THE MESSAGE [Avoidance Area Breach!] 40-1388
E-74 CONTROL BOX CAN NOT BE TURNED ON 40-1389
E-75 CONTROL BOX DOES NOT DISPLAY INTELLIGENT MACHINE CONTROL SCREEN 40-1390
E-76 CONTROL BOX DOES NOT DISPLAY HYDRAULIC EXCAVATOR IMAGE 40-1391
E-77 CONTROL BOX DOES NOT DISPLAY DESIGN SURFACE 40-1392
E-78 CONTROL BOX TOUCH PANEL DOES NOT RESPOND 40-1393
E-79 CONTROL BOX TOUCH PANEL IS INACCURATE 40-1394
E-80 WHEN CHECKING AND ADJUSTING THE BUCKET EDGE POSITION, THE VALUE IS DIFFERENT
FROM ACTUAL MACHINE 40-1395
E-81 SEMI-AUTO MODE IS NOT DISPLAYED WHEN AUTO/MANUAL SWITCH IS PRESSED40-1397
00 INDEX AND FOREWORD INDEX
PC360LCI-11 00-15
E-82 AUTO GRADE ASSIST CONTROL DOES NOT OPERATE WHILE SEMI-AUTO MODE IS DISPLAYED
40-1398
E-83 AUTO STOP CONTROL DOES NOT OPERATE WHILE SEMI-AUTO MODE IS DISPLAYED
40-1399
E-84 BLADE EDGE POSITION ON DESIGN SURFACE IS NOT ACCURATE WHEN AUTO GRADE
ASSIST FUNCTION IS ON 40-1400
E-85 BLADE EDGE STOP POSITION IS NOT ACCURATE FOR DESIGN SURFACE WHEN AUTO
STOP CONTROL FUNCTION IS ON 40-1402
E-86 FACING ANGLE COMPASS DOES NOT BECOME PERPENDICULAR TO TARGET 40-1404
E-87 NG OCCURS VERY OFTEN IN IMU CALIBRATION DIAGNOSIS 40-1405
E-88 CUSHION FOR BOOM RAISE END DOES NOT WORK OR IS WEAK 40-1406
E-89 CUSHION FOR ARM IN END DOES NOT WORK OR IS WEAK 40-1407
TROUBLESHOOTING FOR HYDRAULIC AND MECHANICAL SYSTEMS (H MODE) 40-1410
INFORMATION MENTIONED IN TROUBLESHOOTING TABLE (H MODE) 40-1410
SYSTEM CHART OF HYDRAULIC AND MECHANICAL SYSTEMS 40-1411
FAILURE MODE AND CAUSE TABLE 40-1413
H-1 ALL WORK EQUIPMENT, SWING AND TRAVEL DO NOT WORK 40-1424
H-2 ALL WORK EQUIPMENT, SWING AND TRAVEL LACK SPEED AND POWER 40-1425
H-3 FINE CONTROL PERFORMANCE OR RESPONSE IS POOR 40-1428
H-4 UNUSUAL NOISE IS HEARD FROM AROUND HYDRAULIC PUMP 40-1429
H-5 ENGINE SPEED DROPS LARGELY OR ENGINE STOPS 40-1430
H-6 SPEED OR POWER OF BOOM IS LOW 40-1432
H-7 ARM SPEED OR POWER IS LOW 40-1438
H-8 BUCKET SPEED OR POWER IS LOW 40-1443
H-9 WORK EQUIPMENT DOES NOT MOVE IN SINGLE OPERATION 40-1447
H-10 HYDRAULIC DRIFT OF BOOM IS LARGE 40-1448
H-11 HYDRAULIC DRIFT OF ARM IS LARGE 40-1450
H-12 HYDRAULIC DRIFT OF BUCKET IS LARGE 40-1452
H-13 WHEN SINGLE WORK EQUIPMENT IS RELIEVED HYDRAULICALLY, OTHER WORK EQUIPMENT
MOVES 40-1453
H-14 TIME LAG OF WORK EQUIPMENT IS LARGE 40-1454
H-15 ONE-TOUCH POWER MAXIMIZING FUNCTION DOES NOT OPERATE 40-1455
H-16 MACHINE PUSH-UP FUNCTION DOES NOT OPERATE 40-1456
H-17 ATTACHMENT CIRCUIT CANNOT BE CHANGED 40-1457
H-18 OIL FLOW IN ATTACHMENT CIRCUIT CANNOT BE CHANGED 40-1458
H-19 IN COMBINED OPERATION OF WORK EQUIPMENT, EQUIPMENT HAVING HEAVIER LOAD
MOVES SLOWER 40-1459
H-20 IN COMBINED OPERATION OF SWING AND TRAVEL, TRAVEL SPEED DROPS LARGELY
40-1460
H-21 IN COMBINED OPERATION OF SWING AND BOOM RAISE, BOOM RISING SPEED IS LOW
40-1461
H-22 MACHINE DOES NOT TRAVEL STRAIGHT 40-1462
H-23 MACHINE IS NOT STEERED WELL OR STEERING POWER IS LOW 40-1464
H-24 TRAVEL SPEED IS LOW 40-1467
H-25 ONE OF TRACKS DOES NOT RUN 40-1469
H-26 TRAVEL SPEED DOES NOT CHANGE, OR TRAVEL SPEED IS TOO SLOW OR FAST 40-1471
H-27 UPPER STRUCTURE DOES NOT SWING BOTH TO THE RIGHT AND LEFT 40-1472
H-28 SWINGS ONLY IN ONE DIRECTION 40-1473
H-29 SWING ACCELERATION OR SWING SPEED IS LOW IN BOTH DIRECTIONS (RIGHT AND
LEFT) 40-1474
H-30 SWING ACCELERATION PERFORMANCE IS POOR OR SWING SPEED IS SLOW IN ONLY
ONE DIRECTION 40-1475
H-31 UPPER STRUCTURE OVERRUNS EXCESSIVELY WHEN IT STOPS SWINGING (BOTH
RIGHT AND LEFT) 40-1476
H-32 UPPER STRUCTURE OVERRUNS EXCESSIVELY WHEN IT STOPS SWINGING (ONLY ONE
DIRECTION EITHER RIGHT OR LEFT) 40-1477
H-33 SHOCK IS LARGE WHEN UPPER STRUCTURE STOPS SWINGING 40-1478
H-34 LARGE UNUSUAL NOISE IS HEARD WHEN UPPER STRUCTURE STOPS SWINGING40-1479
INDEX 00 INDEX AND FOREWORD
00-16 PC360LCI-11
H-35 SWING DRIFT ON A SLOPE IS LARGE (WHILE SWING PARKING BRAKE IS APPLIED)40-1480
H-36 SWING DRIFT ON A SLOPE IS LARGE (WHILE SWING PARKING BRAKE IS RELEASED)
40-1481
TROUBLESHOOTING OF ENGINE (S-MODE) 40-1482
INFORMATION MENTIONED IN TROUBLESHOOTING TABLE (S MODE) 40-1482
S-1 ENGINE DOES NOT CRANK WHEN STARTING SWITCH IS TURNED TO START POSITION
40-1483
S-2 ENGINE CRANKS BUT NO EXHAUST GAS COMES OUT 40-1484
S-3 FUEL IS BEING INJECTED BUT ENGINE DOES NOT START (MISFIRING: ENGINE CRANKS
BUT DOES NOT START) 40-1485
S-4 ENGINE STARTABILITY IS POOR 40-1487
S-5 ENGINE DOES NOT PICK UP SMOOTHLY 40-1489
S-6 ENGINE STOPS DURING OPERATION 40-1491
S-7 ENGINE RUNS ROUGH OR IS UNSTABLE 40-1493
S-8 ENGINE LACKS POWER 40-1494
S-9 KDPF GETS CLOGGED IN A SHORT TIME 40-1496
S-10 ENGINE OIL CONSUMPTION IS EXCESSIVE 40-1498
S-11 OIL BECOMES CONTAMINATED QUICKLY 40-1499
S-12 FUEL CONSUMPTION IS EXCESSIVE 40-1500
S-13 OIL IS IN COOLANT (OR COOLANT SPURTS BACK OR COOLANT LEVEL GOES DOWN)
40-1501
S-14 OIL PRESSURE DROPS 40-1502
S-15 FUEL MIXES INTO ENGINE OIL 40-1504
S-16 WATER MIXES INTO ENGINE OIL (MILKY) 40-1505
S-17 COOLANT TEMPERATURE RISES TOO HIGH (OVERHEATING) 40-1506
S-18 UNUSUAL NOISE IS HEARD 40-1507
S-19 VIBRATION IS EXCESSIVE 40-1508
S-20 AIR CANNOT BE BLED FROM FUEL CIRCUIT 40-1509
S-21 ACTIVE REGENERATION IS EXECUTED FREQUENTLY 40-1510
S-22 ACTIVE REGENERATION TAKES TIME 40-1512
S-23 WHITE SMOKE IS EXHAUSTED DURING ACTIVE REGENERATION 40-1513
S-24 AdBlue/DEF CONSUMPTION IS EXCESSIVE 40-1514
S-25 THERE IS UNUSUAL SMELL (IRRITATING ODOR) 40-1516
S-26 FOREIGN MATERIALS ENTER AdBlue/DEF (AdBlue/DEF INCREASES) 40-1517
50 DISASSEMBLY AND ASSEMBLY 50-1
CONTENTS 50-2
ABBREVIATION LIST 50-8
RELATED INFORMATION ON DISASSEMBLY AND ASSEMBLY 50-14
HOW TO READ THIS MANUAL 50-14
COATING MATERIALS LIST 50-16
SPECIAL TOOLS LIST 50-20
SKETCHES OF SPECIAL TOOLS 50-35
ENGINE AND COOLING SYSTEM 50-44
REMOVE AND INSTALL SUPPLY PUMP ASSEMBLY 50-44
REMOVE AND INSTALL INJECTOR ASSEMBLY 50-57
REMOVE AND INSTALL CYLINDER HEAD ASSEMBLY 50-76
REMOVE AND INSTALL EGR VALVE ASSEMBLY 50-104
REMOVE AND INSTALL EGR COOLER ASSEMBLY 50-107
REMOVE AND INSTALL STARTER ASSEMBLY 50-111
REMOVE AND INSTALL ALTERNATOR BELT 50-113
REMOVE AND INSTALL RADIATOR ASSEMBLY 50-119
REMOVE AND INSTALL HYDRAULIC OIL COOLER ASSEMBLY 50-123
REMOVE AND INSTALL AFTERCOOLER ASSEMBLY 50-128
REMOVE AND INSTALL ENGINE AND MAIN PUMP ASSEMBLY 50-131
REMOVE AND INSTALL ENGINE FRONT OIL SEAL 50-159
REMOVE AND INSTALL ENGINE REAR OIL SEAL 50-167
REMOVE AND INSTALL ENGINE HOOD ASSEMBLY 50-176
REMOVE AND INSTALL FUEL TANK ASSEMBLY 50-181
00 INDEX AND FOREWORD INDEX
PC360LCI-11 00-17
REMOVE AND INSTALL AdBlue/DEF TANK ASSEMBLY 50-190
REMOVE AND INSTALL AdBlue/DEF TANK SENSOR FLANGE ASSEMBLY 50-201
REMOVE AND INSTALL AdBlue/DEF TANK SENSOR 50-214
REMOVE AND INSTALL AdBlue/DEF TANK STRAINER 50-221
REMOVE AND INSTALL AdBlue/DEF TANK FILLER PORT FILTER 50-222
REMOVE AND INSTALL KDPF ASSEMBLY 50-227
DISASSEMBLE AND ASSEMBLE OF KDPF ASSEMBLY 50-234
REMOVE AND INSTALL SCR ASSEMBLY 50-243
REMOVE AND INSTALL KDPF, SCR ASSEMBLY 50-249
REMOVE AND INSTALL KDPF, SCR ASSEMBLY BRACKET 50-263
REMOVE AND INSTALL KCCV ASSEMBLY 50-271
REMOVE AND INSTALL AdBlue/DEF MIXING TUBE 50-274
REMOVE AND INSTALL AdBlue/DEF INJECTOR 50-282
REMOVE AND INSTALL AdBlue/DEF PUMP 50-289
REMOVE AND INSTALL AdBlue/DEF HOSE 50-295
REMOVE AND INSTALL AIR CLEANER ASSEMBLY 50-310
REMOVE AND INSTALL AIR CONDITIONER COMPRESSOR ASSEMBLY 50-314
REMOVE AND INSTALL AIR CONDITIONER CONDENSER ASSEMBLY 50-317
POWER TRAIN 50-319
REMOVE AND INSTALL TRAVEL MOTOR AND FINAL DRIVE ASSEMBLY 50-319
DISASSEMBLE AND ASSEMBLE FINAL DRIVE ASSEMBLY 50-322
REMOVE AND INSTALL SWING MOTOR AND SWING MACHINERY ASSEMBLY 50-335
DISASSEMBLE AND ASSEMBLE SWING MACHINERY ASSEMBLY 50-338
REMOVE AND INSTALL SWING CIRCLE ASSEMBLY 50-349
UNDERCARRIAGE AND FRAME 50-351
SEPARATION AND CONNECTION OF TRACK ASSEMBLY 50-351
REMOVE AND INSTALL SPROCKET 50-356
REMOVE AND INSTALL IDLER AND IDLER CUSHION ASSEMBLY 50-358
DISASSEMBLE AND ASSEMBLE IDLER ASSEMBLY 50-360
DISASSEMBLE AND ASSEMBLE OF IDLER CUSHION ASSEMBLY 50-365
DISASSEMBLE AND ASSEMBLE TRACK ROLLER ASSEMBLY 50-368
DISASSEMBLEAND ASSEMBLE CARRIER ROLLER ASSEMBLY 50-372
REMOVE AND INSTALL REVOLVING FRAME ASSEMBLY 50-376
REMOVE AND INSTALL COUNTERWEIGHT ASSEMBLY 50-383
HYDRAULIC SYSTEM 50-387
REMOVE AND INSTALL CENTER SWIVEL JOINT ASSEMBLY 50-387
DISASSEMBLE AND ASSEMBLE CENTER SWIVEL JOINT ASSEMBLY 50-391
REMOVE AND INSTALL HYDRAULIC TANK ASSEMBLY 50-394
REMOVE AND INSTALL MAIN PUMP ASSEMBLY 50-404
REMOVE AND INSTALL JUNCTION BLOCK ASSEMBLY FOR INTELLIGENT MACHINE CONTROL
50-410
REMOVE AND INSTALL PRESSURE SENSOR FOR INTELLIGENT MACHINE CONTROL 50-415
REMOVE AND INSTALL BOOM SPOOL STROKE SENSOR 50-421
REMOVE AND INSTALL ARM SPOOL STROKE SENSOR 50-423
REMOVE AND INSTALL JUNCTION BLOCK BYPASS ADAPTER FOR INTELLIGENT MACHINE
CONTROL 50-427
REMOVE AND INSTALL CONTROL VALVE ASSEMBLY 50-431
DISASSEMBLE AND ASSEMBLE CONTROL VALVE ASSEMBLY 50-443
REMOVE AND INSTALL ATT BYPASS SOLENOID 50-450
DISASSEMBLE AND ASSEMBLE WORK EQUIPMENT PPC VALVE ASSEMBLY 50-455
DISASSEMBLE AND ASSEMBLE TRAVEL PPC VALVE ASSEMBLY 50-458
WORK EQUIPMENT 50-461
REMOVE AND INSTALL BUCKET ASSEMBLY 50-461
REMOVE AND INSTALL ARM ASSEMBLY 50-463
REMOVE AND INSTALL WORK EQUIPMENT ASSEMBLY 50-469
DISASSEMBLE AND ASSEMBLE STROKE SENSING BOOM CYLINDER ASSEMBLY 50-478
DISASSEMBLE AND ASSEMBLE STROKE SENSING ARM CYLINDER ASSEMBLY 50-491
DISASSEMBLE AND ASSEMBLE STROKE SENSING BUCKET CYLINDER ASSEMBLY 50-506
INDEX 00 INDEX AND FOREWORD
00-18 PC360LCI-11
CAB AND ITS ATTACHMENTS 50-523
REMOVE AND INSTALL OPERATOR’S CAB ASSEMBLY 50-523
REMOVE AND INSTALL OPERATOR CAB GLASS (ADHERED GLASS) 50-542
REMOVE AND INSTALL FRONT WINDOW ASSEMBLY 50-554
REMOVE AND INSTALL FLOOR FRAME ASSEMBLY 50-563
REMOVE AND INSTALL AIR CONDITIONER UNIT ASSEMBLY 50-577
REMOVE AND INSTALL OPERATOR’S SEAT 50-592
REMOVE AND INSTALL SEAT BELT 50-598
REMOVE AND INSTALL FRONT WIPER ASSEMBLY 50-600
ELECTRICAL SYSTEM 50-615
REMOVE AND INSTALL ENGINE CONTROLLER ASSEMBLY 50-615
REMOVE AND INSTALL PUMP CONTROLLER ASSEMBLY 50-621
REMOVE AND INSTALL WORK EQUIPMENT CONTROLLER ASSEMBLY 50-631
REMOVE AND INSTALL KomVision CONTROLLER ASSEMBLY 50-635
REMOVE AND INSTALL MACHINE MONITOR ASSEMBLY 50-638
REMOVE AND INSTALL PUMP SWASH PLATE SENSOR 50-645
REMOVE AND INSTALL MASS AIR FLOW AND TEMPERATURE SENSOR 50-647
REMOVE AND INSTALL KCCV CRANKCASE PRESSURE SENSOR 50-649
REMOVE AND INSTALL SCR TEMPERATURE SENSOR 50-651
REMOVE AND INSTALL REARVIEW CAMERA 50-654
REMOVE AND INSTALL KomVision CAMERA 50-657
REMOVE AND INSTALL KOMTRAX TERMINAL ASSEMBLY 50-660
REMOVE AND INSTALL ICT SENSOR CONTROLLER ASSEMBLY 50-667
REMOVE AND INSTALL JUNCTION HARNESS OF CONTROL BOX 50-673
REMOVE AND INSTALL CONTROL BOX HARNESS 50-679
REMOVE AND INSTALL GNSS RECEIVER 50-682
REMOVE AND INSTALL NETWORK MODEM 50-684
REMOVE AND INSTALL GNSS RECEIVER ANTENNA 50-685
REMOVE AND INSTALL NETWORK MODEM ANTENNA 50-687
REMOVE AND INSTALL GNSS ANTENNA 50-689
REMOVE AND INSTALL IMU SENSOR 50-691
60 MAINTENANCE STANDARD 60-1
CONTENTS 60-2
ABBREVIATION LIST 60-3
ENGINE AND COOLING SYSTEM 60-9
MAINTENANCE STANDARD OF ENGINE MOUNT 60-9
MAINTENANCE STANDARD OF COOLING SYSTEM 60-11
POWER TRAIN 60-13
MAINTENANCE STANDARD OF SWING CIRCLE 60-13
MAINTENANCE STANDARD OF SWING MACHINERY 60-14
MAINTENANCE STANDARD OF FINAL DRIVE 60-16
MAINTENANCE STANDARD OF SPROCKET 60-18
MAINTENANCE STANDARD OF SPROCKET TOOTH PROFILE FULL-SCALE DRAWING 60-19
UNDERCARRIAGE AND FRAME 60-21
MAINTENANCE STANDARD OF TRACK FRAME AND IDLER CUSHION 60-21
MAINTENANCE STANDARD OF IDLER 60-23
MAINTENANCE STANDARD OF TRACK ROLLER 60-25
MAINTENANCE STANDARD OF CARRIER ROLLER 60-27
MAINTENANCE STANDARD OF TRACK SHOE 60-28
MAINTENANCE STANDARD OF TRIPLE SHOE 60-31
HYDRAULIC SYSTEM 60-32
MAINTENANCE STANDARD OF HYDRAULIC TANK 60-32
MAINTENANCE STANDARD OF MAIN PUMP 60-33
MAINTENANCE STANDARD OF SWING MOTOR 60-35
MAINTENANCE STANDARD OF TRAVEL MOTOR 60-38
MAINTENANCE STANDARD OF CONTROL VALVE 60-41
MAINTENANCE STANDARD OF WORK EQUIPMENT AND SWING PPC VALVE 60-53
MAINTENANCE STANDARD OF TRAVEL PPC VALVE 60-56
00 INDEX AND FOREWORD INDEX
PC360LCI-11 00-19
MAINTENANCE STANDARD OF 1ST-LINE ATTACHMENT PPC VALVE (WITH EPC VALVE) 60-59
MAINTENANCE STANDARD OF 2ND-LINE ATTACHMENT PPC VALVE 60-62
MAINTENANCE STANDARD OF SOLENOID VALVE 60-64
MAINTENANCE STANDARD OF ATTACHMENT CIRCUIT SELECTOR VALVE 60-65
MAINTENANCE STANDARD OF CENTER SWIVEL JOINT 60-66
WORK EQUIPMENT 60-67
MAINTENANCE STANDARD OF WORK EQUIPMENT LINKAGE 60-67
MAINTENANCE STANDARD OF BOOM CYLINDER 60-76
MAINTENANCE STANDARD OF STROKE SENSING BOOM CYLINDER 60-77
MAINTENANCE STANDARD OF STROKE SENSING ARM CYLINDER 60-79
MAINTENANCE STANDARD OF STROKE SENSING BUCKET CYLINDER 60-81
MAINTENANCE STANDARD OF STROKE SENSOR FOR BOOM CYLINDER 60-83
MAINTENANCE STANDARD OF STROKE SENSOR FOR ARM CYLINDER 60-84
MAINTENANCE STANDARD OF STROKE AND RESET SENSOR FOR BUCKET CYLINDER 60-85
80 APPENDIX 80-1
CONTENTS 80-2
ABBREVIATION LIST 80-4
AIR CONDITIONER SYSTEM 80-10
PRECAUTIONS FOR REFRIGERANT 80-10
AIR CONDITIONER COMPONENT 80-11
SPECIFICATIONS OF AIR CONDITIONER 80-13
CONFIGURATION AND FUNCTION OF REFRIGERATION CYCLE 80-14
OUTLINE OF REFRIGERATION CYCLE 80-15
COMPONENT PARTS OF AIR CONDITIONER SYSTEM 80-17
AIR CONDITIONER UNIT 80-17
COMPONENT PARTS OF AIR CONDITIONER UNIT 80-21
AIR CONDITIONER CONTROLLER 80-25
COMPRESSOR 80-26
CONDENSER 80-27
RECEIVER DRIER 80-28
SENSORS FOR AIR CONDITIONER SYSTEM 80-29
EXPLANATION OF PROCEDURE FOR TESTING AND TROUBLESHOOTING OF AIR CONDITIONER
80-31
CIRCUIT DIAGRAM AND ARRANGEMENT OF CONNECTOR PINS FOR AIR CONDITIONER 80-33
AIR CONDITIONER SYSTEM DIAGRAM 80-35
INPUT AND OUTPUT SIGNALS OF AIR CONDITIONER CONTROLLER 80-36
INSTALLATION LOCATIONS OF AIR CONDITIONER PARTS AND ARRANGEMENT OF CONNECTORS
80-38
TESTING AIR LEAKAGE (DUCT) 80-42
METHOD FOR TESTING AIR LEAKAGE (DUCT) 80-42
TESTING AIR CONDITIONER USING SELF-DIAGNOSIS FUNCTION 80-43
HOW TO OPEN THE ELECTRICAL SYSTEM ABNORMALITY RECORD SCREEN IN SERVICE MODE
OF THE MACHINE MONITOR 80-44
TEST VENT (MODE) CHANGEOVER 80-45
METHOD FOR TESTING VENT (MODE) CHANGEOVER 80-45
TESTING FRESH/RECIRC AIR CHANGEOVER 80-46
METHOD FOR TESTING FRESH/RECIRC AIR CHANGEOVER 80-46
TEST SUNLIGHT SENSOR 80-47
METHOD FOR TESTING SUNLIGHT SENSOR 80-47
TEST (DUAL) PRESSURE SWITCH FOR REFRIGERANT 80-48
METHOD FOR TESTING (DUAL) PRESSURE SWITCH FOR REFRIGERANT 80-48
TEST RELAYS 80-49
METHOD FOR TESTING RELAYS 80-49
AIR CONDITIONER TROUBLESHOOTING CHART 1 80-50
AIR CONDITIONER TROUBLESHOOTING CHART 2 80-51
INFORMATION DESCRIBED IN TROUBLESHOOTING TABLE 80-54
FAILURE CODE [879AKA] 80-56
FAILURE CODE [879AKB] 80-57
INDEX 00 INDEX AND FOREWORD
00-20 PC360LCI-11
FAILURE CODE [879BKA] 80-58
FAILURE CODE [879BKB] 80-60
FAILURE CODE [879CKA] 80-62
FAILURE CODE [879CKB] 80-63
FAILURE CODE [879DKZ] 80-64
FAILURE CODE [879EMC] 80-66
FAILURE CODE [879FMC] 80-67
FAILURE CODE [879GKX] 80-68
A-1 TROUBLESHOOTING FOR POWER SUPPLY SYSTEM (AIR CONDITIONER DOES NOT OPERATE)
80-70
A-2 TROUBLESHOOTING FOR COMPRESSOR AND REFRIGERANT SYSTEM (AIR IS NOT COOLED)
80-72
A-3 TROUBLESHOOTING FOR BLOWER MOTOR SYSTEM (NO AIR COMES OUT OR AIR FLOW IS
ABNORMAL) 80-75
A-4 TROUBLESHOOTING FOR FRESH/RECIRC AIR CHANGEOVER 80-77
TROUBLESHOOTING USING GAUGE PRESSURE 80-79
CONNECTION OF SERVICE TOOL 80-82
METHOD FOR CONNECTING SERVICE TOOL 80-82
PRECAUTIONS FOR DISCONNECTING AND CONNECTING HOSES AND TUBES IN AIR CONDITIONER
PIPINGS 80-84
HANDLE COMPRESSOR OIL 80-86
90 CIRCUIT DIAGRAMS 90-1
CONTENTS 90-2
ABBREVIATION LIST 90-3
HYDRAULIC CIRCUIT DIAGRAM 90-9
SYMBOLS USED IN HYDRAULIC CIRCUIT DIAGRAM 90-9
HYDRAULIC CIRCUIT DIAGRAM (1/3) 90-13
HYDRAULIC CIRCUIT DIAGRAM (2/3) 90-15
HYDRAULIC CIRCUIT DIAGRAM (3/3) 90-17
ELECTRICAL CIRCUIT DIAGRAM 90-19
SYMBOLS USED IN ELECTRICAL CIRCUIT DIAGRAM 90-19
ELECTRICAL CIRCUIT DIAGRAM (1/14) 90-23
ELECTRICAL CIRCUIT DIAGRAM (2/14) 90-25
ELECTRICAL CIRCUIT DIAGRAM (3/14) 90-27
ELECTRICAL CIRCUIT DIAGRAM (4/14) 90-29
ELECTRICAL CIRCUIT DIAGRAM (5/14) 90-31
ELECTRICAL CIRCUIT DIAGRAM (6/14) 90-33
ELECTRICAL CIRCUIT DIAGRAM (7/14) 90-35
ELECTRICAL CIRCUIT DIAGRAM (8/14) 90-37
ELECTRICAL CIRCUIT DIAGRAM (9/14) 90-39
ELECTRICAL CIRCUIT DIAGRAM (10/14) 90-41
ELECTRICAL CIRCUIT DIAGRAM (11/14) 90-43
ELECTRICAL CIRCUIT DIAGRAM (12/14) 90-45
ELECTRICAL CIRCUIT DIAGRAM (13/14) 90-47
ELECTRICAL CIRCUIT DIAGRAM (14/14) 90-49
INDEX 1

IMAGES PREVIEW OF THE MANUAL: