Kymco Bet & Win 125/150 Service Manual - PDF DOWNLOAD

Kymco Bet & Win 125/150 Service Manual - PDF DOWNLOAD

FILE DETAILS:

Kymco Bet & Win 125/150 Service Manual - PDF DOWNLOAD

Language : English
Pages : 225
Downloadable : Yes
File Type : PDF

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Kymco Bet & Win 125/150 Service Manual - PDF DOWNLOAD

General Information
Exhaust Muffler/Frame Covers 2
Inspection/Adjustment 3
Lubrication System 4
Engine Removal/Installation 5
Cylinder Head/Valves 6
Cylinder/Piston 7
Drive and Driven Pulleys/Kick Starter 8
Final Reduction 9
AC Generator/Starter Clutch 10
Crankcase/Crankshaft 11
Cooling System 12
Fuel System/Carburetor/Fuel Pump 13
Fuel Tank 14
Steering Handlebar/Front Wheel/Front Brake/Front Shock Absorber/Front Fork 15
Rear Brake/Rear Fork/Rear Wheel/Rear Shock Absorber 16
Electrical System:
Battery/Charging System 17
Ignition System 18
Starting System 19
Switches/ Horn/Fuel Unit/Thermo-Static Switch/Temperature Gauge/Instrument Panel/Lights 20

DESCRIPTION:

Kymco Bet & Win 125/150 Service Manual - PDF DOWNLOAD

PREFACE:

• This Service Manual describes the technical features and servicing procedures for the KYMCO Bet & Win 125/150.
• Section 1 contains the precautions for all operations stated in this manual. Read them carefully before any operation is started.
• Section 2 is the removal/installation procedures for the frame covers which are subject to higher removal/installation frequency during maintenance and servicing operations.
• Section 3 describes the inspection/ adjustment procedures, safety rules and service information for each part, starting from periodic maintenance.
• Sections 5 through 13 give instructions for disassembly, assembly and adjustment of engine parts. Section 14 is the removal/ installation of chassis. Section 16 states the testing and measuring methods of electrical equipment.
• Most sections start with an assembly or system illustration and troubleshooting for the section. The subsequent pages give detailed procedures for the section

GENERAL INFORMATION:

•  If the fuse is burned out, find the cause and repair it. Replace it with a new one according to the specified capacity. n After operation, terminal caps shall be installed securely.
• When taking out the connector, the lock on the connector shall be released before operation.
• Hold the connector body when connecting or disconnecting it.
• Do not pull the connector wire. n Check if any connector terminal is bending, protruding or loose.
• The connector shall be inserted completely. n If the double connector has a lock, lock it at the correct position.
• Check if there is any loose wire.
• Before connecting a terminal, check for damaged terminal cover or loose negative terminal.
• Check the double connector cover for proper coverage and installation

G.B 15/03/25