Liebherr R9200 Hydraulic excavator Backoe attachment Assembly Manual – PDF DOWNLOAD

Liebherr R9200 Hydraulic excavator Backoe attachment Assembly Manual – PDF DOWNLOAD

FILE DETAILS:

Liebherr R9200 Hydraulic excavator Backoe attachment Assembly Manual – PDF DOWNLOAD

Language : English
Pages :114
Downloadable : Yes
File Type : PDF
Size:20.6 MB

DESCRIPTION

Liebherr R9200 Hydraulic excavator Backoe attachment Assembly Manual – PDF DOWNLOAD

Product identification:
Manufacturer: LIEBHERR Mining Equipment Colmar SAS
Type: Assembly Manual
Conformity: EC
1.00: Safety instructions

Working with the machine holds dangers to which you as the owner, machine operator or maintenance expert could be exposed. If you regularly read and note the safety information, however, you can prevent danger and accidents. This is particularly true for those who are only occasionally in contact with the machine, eg. for maintenance work. The following information comprises safety regulations which, if followed conscientiously, will contribute to your safety and that of other persons, as well as avoiding damage to the machine. Following these precautions does not release you from the responsibility to take note of safety regulations which apply on site or of guidelines given by legal bodies or professional associations. For EU countries, guideline 2009 / 104 / EC contains the minimum required safety information applicable to the owner.

Safety InstructionsGeneral safety instructions

• Please familiarize yourself with the operating instructions before starting up the machine.
• Ensure that you have obtained, read and understood any additional instructions relating to special accessories for the machine.
• Only specifically authorized persons may operate, maintain or repair the machine. The legal minimum age is to be adhered to.
• Only employ trained or appropriately instructed personnel. Clearly establish which personnel are responsible for operating, setting up, maintaining and repairing the machine. Give personnel the power to refuse to carry out unsafe instructions. This also applies in relation to traffic regulations.
• Only permit apprentices and personnel who are in training or who have only general training to m operate on the machine under the constant supervision of an experienced member of staff. o C’II As far as possible, monitor personnel to ensure that they are adhering to safe working practices, ;:;; are aware of risks and are observing the operating instructions. ~ 0 Always wear safe work clothes when you are working on or with the machine.
• Avoid wearing rings, -~ wrist watches, ties, scarves, open jackets, baggy clothing etc … There is a risk of injury from, for ~ example, getting caught up or being drawn in. i – Wear individual protective equipment (protective goggles, safety helmets, safety shoes and 0 gloves, reflective vests and ear protection ~ – Ensure that you obtain information on any special safety regulations for the job site from the site foreman.

TABLE OF CONTENTS:

Liebherr R9200 Hydraulic excavator Backoe attachment Assembly Manual – PDF DOWNLOAD

Assembly Manual
Safety instructions 100
1 Meaning of the symbols in this manual 1003
2 Use in accordance with the regulations 1004
3 Safety Instructions 1004
4 Bringing the machine safely into service 1006
5 Servicing the machine safely 10014
6 Conversion factors 10021
Excavator Assembly 200
1 Reason for the job 20023
2 Operational Process 20024
3 Requirements for the assembly site 20024
31 Safety precaution – Secure ground selected 20024
32 Persons and tools requirements 20024
33 Assembly by inexperienced persons 20026
34 Assembly by experienced persons 20028
35 Organization of the working area 20030
4 Arrival of the machine components 20035
41 Transport responsibility 20035
42 Check for any missing parts 20035
43 Unload components on site and parts layout 20035
5 Assembly process – Initial conditions 20036
51 General information 20036
6 Assembly – overview 20036
61 Machine and construction equipment 20036
62 Uppercarriage 20037
63 Undercarriage 20038
7 Assembly process 20039
71 Unloading trucks/ Positioning elements 20044
72 Opening boxes and containers 20047
73 Pre-assembly of the counterweight 20049
74 Pre-assembly of the cabin 20050
75 Pre-assembly of the boom 20052
76 Assembly of the undercarriage 20057
77 Assembly of the uppercarriage 20064
78 Assembly of the counterweight 20071
79 Assembly of the guard railing and the access ladder 20076
710 Assembly of the cabin 20078
711 Assembly of the boom 20082
712 Assembly of the stick 20086
713 Electrical and hydraulic connections 20095
714 Oil filling 20096
715 First start check procedures 20097
716 Assembly of the cylinders 20098
717 Troubleshooting 200101
718 Assembly of the bucket 200103
7 19 Commissioning 200 107 — 1(‘)

IMAGES PREVIEW OF THE MANUAL: