New Holland Boomer 3040 3045 3050 Compact Tractor Service Manual 84242309 – PDF DOWNLOAD

New Holland Boomer 3040 3045 3050 Compact Tractor Service Manual

FILE DETAILS:

New Holland Boomer 3040 3045 3050 Compact Tractor Service Manual

Size: 190 MB
Format: PDF
Language: English
Number of Pages: 1818 pages
Brand: New Holland
Type of document: Service Manual
Model: Boomer 30 & 35 Compact Tractor
Part No: 84242309

DESCRIPTION:

New Holland Boomer 3040 3045 3050 Compact Tractor Service Manual

FOREWORD:

• This service manual provides the technical information needed to properly service the NEW HOLLAND AGRICULTURE Boomer 3040, 3045, and 3050 model tractors. Use this manual in conjunction with the operator’s manual for complete operation, adjustment, and maintenance information.
• On NEW HOLLAND AGRICULTURE equipment, left and right are determined by standing behind the unit, looking in the direction of travel.

SAFETY RULES:

• A careful operator is the best operator. Most accidents can be avoided by observing certain precautions. To help prevent accidents, read the following precautions before operating this equipment. Equipment should be operated only by those who are responsible and instructed to do so.

THE TRACTOR :

• 1. Read the Operator’s Manual carefully before using the tractor. Lack of operating knowledge can lead to accidents.
• 2. Use an approved roll bar and seat belt for safe operation. Overturning a tractor without a roll bar can result in death or injury. If your tractor is not equipped with a roll bar and seat belt, see your New Holland Dealer.
• 3. Always use the seat belt. The only instancewhen the seat belt should not be used is if the roll bar has been removed from the tractor.
• 4. If a front end loader is to be installed, always use a FOPS (Falling Object Protective Structure) canopy to avoid injury from falling objects.
• 5. Use the handholds and step plates when getting on and off the tractor to prevent falls. Keep steps and platform cleared of mud and debris.
• 6. Do not permit anyone but the operator to ride on the tractor. There is no safe place for extra riders.
• 7. Keep all safety decals clean of dirt and grime, and replace all missing, illegible, or damaged safety decals. See the list of decals in the Decal section of this manual.

SERVICING THE TRACTOR:

• 1. The cooling system operates under pressure which is controlled by the radiator cap. It is dangerous to remove the cap while the system is hot. Always turn the cap slowly to the first stop and allow pressure to escape before removing the cap entirely.
• 2. Keep any type of open flame away from the tractor and do not smoke while refueling.Wait for the engine to cool before refueling.
• 3. Keep the tractor and equipment, particularly brakes and steering, maintained in a reliable and satisfactory condition to ensure your safety and comply with legal requirements.
• 4. Keep open flame or cold weather starting aids away from the battery to prevent fires or explosions. Use jumper cables according to instructions to prevent sparks which could cause explosion.
• 5. Stop the engine before performing any service on the tractor

TABLE OF CONTENTS:

New Holland Boomer 3040 3045 3050 Compact Tractor Service Manual

INTRODUCTION
Engine 10
Engine and crankcase 10001
Cylinder heads 10101
Pan and covers 10102
Crankshaft and flywheel 10103
Connecting rods and pistons 10105
Valve drive and gears 10106
Balancer and damper 10110
Pump drives 10114
Lift pump and lines10210
Fuel tanks 10216
Fuel injection system 10218
Intake and exhaust manifolds and muffler10254
Engine lubrication system 10304
Engine cooling system 10400
Fan and drive10414
Clutch 18
Clutch hydraulic release control 18104
Clutch and components 18110
Transmission 21
Mechanical transmission21114
Mechanical transmission external controls21130
Mechanical transmission internal components 21140
Front axle system 25
Powered front axle25100
Front bevel gear set and differential 25102
84242309 07/08/2012
Final drive hub, steering knuckles, and shafts 25108
Final drives 25310
Rear axle system 27
Powered rear axle 27100
Rear bevel gear set and differential 27106
Planetary and final drives 27120
Hydrostatic drive 29
Transmission and steering hydrostatic control 29100
Hydrostatic transmission29202
Reservoir, cooler, and lines 29204
Pump and motor components 29218
Power Take-Off (PTO) 31
Rear electrohydraulic control 31104
Two-speed rear Power Take-Off (PTO) 31114
Central Power Take-Off (PTO)31120
Brakes and controls 33
Parking brake / Parking lock 33110
Mechanical service brakes 33120
Hydraulic systems 35
Hydraulic systems 35000
Pump control valves 35102
Fixed displacement pump 35104
Three-point hitch control valve35114
Remote control valves 35204
Reservoir, cooler, and filters 35300
Regulated/Low pressure system 35322
Safety and main relief valves 35350
Hitches, drawbars, and implement couplings 37
Rear three-point hitch 37110
Steering 41
Hydraulic control components 41200
Pump 41206
Cylinders 41216
Cab climate control 50
Heating50100
Ventilation 50104
Air conditioning 50200
Electrical systems 55
Electrical system 55000
Heating, Ventilation, and Air-Conditioning (HVAC) control system55050
Cab Heating, Ventilation, and Air-Conditioning (HVAC) controls 55051
Harnesses and connectors 55100
Engine starting system 55201
Cold start aid55202
Alternator 55301
Battery 55302
Warning indicators, alarms, and instruments 55408
Wiper/Washer system 55518
Cab engine controls 55525
Platform, cab, bodywork, and decals 90
Engine hood and panels90100
Engine shields, hood latches, and trims 90102
Protections – ROPS and FOPS 90114
Pneumatically-adjusted operator seat 90124
Cab 90150
Cab interior 90151
Cab doors and hatches 90154