New Holland T8.320,T8.350,T8.380,T8.410,T8.435 (CVT) Tractor Service Repair Manual

New Holland T8.320,T8.350,T8.380,T8.410,T8.435 (CVT) Tractor Service Repair Manual

FILE DETAILS:

New Holland T8.320,T8.350,T8.380,T8.410,T8.435 (CVT) Tractor Service Repair Manual 

Size : 359 MB
Format : PDF
Language : English
Number of Pages : 4263 Pages

DESCRIPTION:

New Holland T8.320,T8.350,T8.380,T8.410,T8.435 (CVT) Tractor Service Repair Manual 

Foreword – Important notice regarding equipment servicing:

All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel, strictly complying with the instructions given, and using, whenever possible, the special tools. Anyone who performs repair and maintenance operations without complying with the procedures provided herein shall be responsible for any subsequent damages.

• The manufacturer and all the organizations of its distribution chain, including – without limitation – national, regional, or local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manufacturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
• In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case of damages caused by parts and/or components not approved by the manufacturer. The manufacturer reserves the right to make improvements in design and changes in specifications at any time without notice and without incurring any obligation to install them on units previously sold.
• Specifications, descriptions, and illustrative material herein are as accurate as known at time of publication but are subject to change without notice. In case of questions, refer to your NEW HOLLAND Sales and Service Networks.

Foreword:

Soil, air, and water are vital factors of agriculture and life in general. When legislation does not yet rule the treatment of some of the substances required by advanced technology, sound judgment should govern the use and disposal of products of a chemical and petrochemical nature.

NOTE: The following are recommendations that may be of assistance:

• Become acquainted with and ensure that you understand the relative legislation applicable to your country.
• Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, antifreeze, cleaning agents, etc., with regard to their effect on man and nature and how to safely store, use, and dispose of these substances.
• Agricultural consultants will, in many cases, be able to help you as well.

Helpful hints:

• Avoid the use of cans or other inappropriate pressurized fuel delivery systems to fill tanks. Such delivery systems may cause considerable spillage.
• In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of these products contain substances that may be harmful to your health.
• Modern oils contain additives. Do not burn contaminated fuels and or waste oils in ordinary heating systems.
• Avoid spillage when you drain fluids such as used engine coolant mixtures, engine oil, hydraulic fluid, brake fluid, etc. Do not mix drained brake fluids or fuels with lubricants. Store all drained fluids safely until you can dispose of the fluids in a proper way that complies with all local legislation and available resources.
• Do not allow coolant mixtures to get into the soil. Collect and dispose of coolant mixtures properly.
• The air-conditioning system contains gases that should not be released into the atmosphere. Consult an air-conditioning specialist or use a special extractor to recharge the system properly.
• Repair any leaks or defects in the engine cooling system or hydraulic system immediately.
• Do not increase the pressure in a pressurized circuit as this may lead to a component failure.
• Protect hoses during welding. Penetrating weld splatter may burn a hole or weaken hoses, allowing the loss of oils, coolant, etc.

TABLE OF CONTENTS:

New Holland T8.320,T8.350,T8.380,T8.410,T8.435 (CVT) Tractor Service Repair Manual

INTRODUCTION
Engine 10
[10001] Engine and crankcase 101
[10101] Cylinder heads 102
[10202] Air cleaners and lines 103
[10216] Fuel tanks 104
[10218] Fuel injection system 105
[10304] Engine lubrication system 106
[10310] Aftercooler 107
[10400] Engine cooling system 108
[10414] Fan and drive 109
[10500] Selective Catalytic Reduction (SCR) exhaust treatment 1010
Power coupling 19
[19100] Drive shaft 191
[19110] Flywheel damper 192
[19120] Drive shaft shield assembly 193
Transmission 21
[21504] Continuously Variable Transmission (CVT) 211
[21505] Continuously Variable Transmission (CVT) external controls 212
[21506] Continuously Variable Transmission (CVT) lubrication system 213
[21507] Continuously Variable Transmission (CVT) internal components 214
[21900] Hydraulic pump drive 215
Four-Wheel Drive (4WD) system 23
[23202] Electro-hydraulic control231
[23314] Drive shaft 232
Front axle system 25
47794970 05/11/2014
[25100] Powered front axle251
[25102] Front bevel gear set and differential252
[25108] Final drive hub, steering knuckles, and shafts 253
[25122] Axle suspension control 254
Rear axle system 27
[27100] Powered rear axle271
[27106] Rear bevel gear set and differential 272
Power Take-Off (PTO) 31
[31104] Rear electro-hydraulic control 311
[31110] One-speed rear Power Take-Off (PTO) 312
[31114] Two-speed rear Power Take-Off (PTO) 313
[31146] Front Power Take-Off (PTO) 314
Brakes and controls 33
[33110] Parking brake or parking lock 331
[33202] Hydraulic service brakes332
[33220] Trailer brake hydraulic control333
[33224] Trailer brake pneumatic control 334
[33240] Emergency brake 335
Hydraulic systems 35
[35000] Hydraulic systems351
[35102] Pump control valves 352
[35106] Variable displacement pump 353
[35114] Three-point hitch control valve354
[35124] Three-point hitch hydraulic adjustment 355
[35204] Remote control valves 356
[35300] Reservoir, cooler, and filters 357
[35304] Combination pump units358
Hitches, drawbars, and implement couplings 37
47794970 05/11/2014
[37110] Rear three-point hitch 371
[37162] Front hitch 372
Steering 41
[41101] Steering control 411
[41200] Hydraulic control components412
[41206] Pump 413
[41432] Autoguidance steering 414
[41910] Auxiliary steering 415
Wheels 44
[44520] Rear wheels 441
Cab climate control 50
[50100] Heating501
[50200] Air conditioning 502
[50300] Cab pressurizing system503
Electrical systems 55
[55010] Fuel injection system 551
[55012] Engine cooling system 552
[55014] Engine intake and exhaust system 553
[55024] Transmission control system 554
[55045] Front axle control system 555
[55046] Rear axle control system 556
[55050] Heating, Ventilation, and Air-Conditioning (HVAC) control system 557
[55051] Cab Heating, Ventilation, and Air-Conditioning (HVAC) controls 558
[55100] Harnesses and connectors 559
[55130] Rear three-point hitch electronic control system 5510
[55201] Engine starting system5511
[55301] Alternator 5512
[55302] Battery 5513
47794970 05/11/2014
[55510] Cab or platform harnesses and connectors 5514
[55512] Cab controls 5515
[55513] Cab transmission controls 5516
[55518] Wiper and washer system 5517
[55640] Electronic modules 5518
[55988] Selective Catalytic Reduction (SCR) electrical system 5519
[55DTC] FAULT CODES5520
Platform, cab, bodywork, and decals 90
[90100] Engine hood and panels901
[90102] Engine shields, hood latches, and trims 902
[90124] Pneumatically-adjusted operator seat 903
[90150] Cab 904
[90151] Cab interior 905
[90160] Cab interior trim and panels 906

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE: