Shangli Forklift Truck 1-3T Operation & Service Instruction Manual - PDF DOWNLOAD

Shangli Forklift Truck 1-3T Operation & Service Instruction Manual - PDF DOWNLOAD

FILE DETAILS:

Shangli Forklift Truck 1-3T Operation & Service Instruction Manual - PDF DOWNLOAD

Language : English
Pages : 104
Downloadable : Yes
File Type : PDF

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Shangli Forklift Truck 1-3T Operation & Service Instruction Manual - PDF DOWNLOAD

CATALOGUE
The Driving , Operation and Daily maintenance of the forklift 1
1.Transportation of forklift 1
2.Safekeeping of forklift 1
3.Preparation before using 1
4.Operation of the forklift 1
5. Operating Cautions 2
6,The oil of lift fork 4
7,lubrication system picture 5
The main technical parameter of forklift 6
The structure ,principle ,adjustment and maintenance of forklift 9
1 Power system 9
1.1General description of generator 9
1.2Installation of gasoline machine and the proceeding 11
1.3Check and adjustment of the generator 13
1.4The fuel system 16
1.5The accelerator pedal 18
2.Electric gas system 19
2.1 summaries 19
2.2 The Brief operation introduction 20
3,Separators 26
3.1 Summary 26
3.2 Maintenance 29
4,the mechanic transmission equipment 32
4.1 Summary 32
5.The hydraulic transmission mechanism 41
5.1 Summary 41
5.2 The torque converter 43
5.3 The hydraulic clutch 44
5.4 Control valve, flowing valve, and mini-valve 45
5.5 Transmission case shell 46
5.6 The oil pump 46
5.7 The hydraulic oil path 47
5.8 Drawing the damaged forklift 48
5.9 The linking position and oil pressure. And oil temperature survey 486.The drive axle 49
6.1 Summary 49
6.2 The installation procedure of wheel hub 51
7,Steering system 52
7.1,Summary 52
7.2,Arbitral 53
7.3 The inspection after reassembling the steering system 55
8,Steering axle 56
8.1 Introduction 56
8.2 Steering knuckle and main steering pin 58
8.3 Hub 58
8.4 Steering cylinder 58
8.5 Rear wheel bearing pre-load adjustment 59
9,Braking system 60
9.1Summary 60
9.2 Maintenance of wheel brake 67
10,Hydraulic system 74
10.1 General description 75
10.2 Main pump 75
10.3 control valve and flowing valve 76
10.4 Hydraulic oil circuit 79
10.5 Operation of the multi-control valve 81
10.6 Lifting cylinder 81
10.7 Flow Regulator Valve 83
10.8 Tilt Cylinder 84
10.9 the hydraulic oil tank 85
10.10 Maintenance of the main oil pump 88
10.11 The testing 92
10.12 Troubleshooting 93
11,Lifting system 95
11.1 General Description 97
11.2 Inner and outer Masts 97
11.3 The fork shelf 97
11.4 The position of the roller 97
11.5 Maintenance 9

DESCRIPTION:

Shangli Forklift Truck 1-3T Operation & Service Instruction Manual - PDF DOWNLOAD

The Driving , Operation and Daily maintenance of the forklift:

The driver and administer of the forklift must keep Safety First in mind and conduct the safe and standard operation according to the Instruction book of utility and maintenance and The Driver manual .1.Transportation of forklift Pay attention to the followings when carrying the forklift with the container or the car(1) Brake the brake level.:(2) Fix the mast and count weight by steel cable both front and rear, the front and rear tire should be cushioned .(3) When hanging, according to the instruction of the anging signal lift the loads2.Safekeeping of forklift"(1) No fuel in tank (don't let out if the cooling liquid is rustproof and antifreeze liquid)(2) Apply the rustproof oil to the non lacquer surface and apply lubrication to the up-and down roller hinge.(3) Low the bracket to the lowest level(4) Put on the brake shift(5) Cushion the forward and backward wheel3.Preparation before using:(1) Don't check the fuel, fuel leakage, the fuel position and check the electric appearance of bearing in the firelit place; Don't add flaming fuel when operation.(2) Check the air pressure of the wheel(3) The forward and backward handrails should be in the middle place. (Neutral place)(4) Don't smoke during the flaming systematic work and checking the clip(5) Check each handrail and the condition of pedal(6) Do the preparing work before the operation(7) Loose the brake level(8) Conduct the pilot movement of the up-and down of the door, the forward and backward slanting, twisting and brake(9) Oil pollution level should be limited within twelve degrees. 4.Operation of the forklift:(1) The driver who has been trained and held the driver license can driver the forklift(2) The operator should wear the shoes, hats, clothes and gloves, which can be used as the safety protection during the operation(3) Check the control and alarm mechanism before driving .if find the damage or flaw, operate after repair(4) The load should not surpass the standard volume during the transportation, the fork should completely insert fully below the goods and put the goods on the fork evenly, using single fork to lift the goods is not allowed

G.B 07/03/25