Volvo Penta TAD734GE Group 0-08, 20-26,32-37 Workshop Manual_311644482 – PDF DOWNLOAD

Volvo Penta TAD734GE Group 0-08, 20-26,32-37 Workshop Manual_311644482 – PDF DOWNLOAD

DESCRIPTION:

Volvo Penta TAD734GE Group 0-08, 20-26,32-37 Workshop Manual_311644482 – PDF DOWNLOAD

General
About this Workshop manual
General information
This Service Manual contains technical data, descriptions
and maintenance and repair instructions for
standard model Volvo Penta products. A list of these
products may be found in the section Technical
Data.
The product designation and the serial number and
specification is indicated on the engine decal or type
plate. This information must be included in all correspondence
regarding the product.
The service manual is produced primarily for the use
of Volvo Penta workshops and their qualified personnel.
It is assumed that any person using the Service
Manual has a fundamental knowledge of the product
and is able to carry out mechanical and electrical
work to trade standard.
Volvo Penta continually develops its products; we
therefore reserve the right to make changes. All information
in this manual is based on product data which
was available up to the date on which the manual was
printed. New working methods and significant
changes introduced to the product after this date are
communicated in the form of Service bulletins.
Spare Parts
Spare parts for the electrical and fuel systems are
subject to various national safety standards. Volvo
Penta Original Spare Parts meet these standards. No
damage of any kind caused by the use of spare parts
not approved by Volvo Penta will be compensated by
any warranty undertaking.
Certified engines
When carrying out service and repair on emission-
certified engines, it is important to be aware
of the following:
Certification means that an engine type has been
inspected and approved by the relevant authority.
The engine manufacturer guarantees that all engines
of the same type are manufactured to correspond to
the certified engine.
This places special demands on service and repair
work, namely:
• Maintenance and service intervals recommended
by Volvo Penta must be complied with.
• Only spare parts approved by Volvo Penta may
be used.
• Service on injection pumps, pump settings and
injectors must always be carried out by an
authorized Volvo Penta workshop.
• The engine must not be converted or modified,
except with accessories and service kits which
Volvo Penta has approved for the engine.
• Nochanges to the exhaust pipe and engine air
inlet duct installations may be made.
• Nowarranty seals (where present on the product)
may be broken by unauthorized persons.
The general instructions in the Operator’s Manual
concerning operation, service and maintenance
apply.
IMPORTANT!
Neglected or poorly-performed care/service and the
use of spare parts not approved by Volvo Penta, will
mean that AB Volvo Penta no longer guarantees that
the engine conforms to the certified model.
Volvo Penta accepts no responsibility for damage or
costs arising as a result of failure to follow the above
mentioned standards.
TABLE OF CONTENTS:

Volvo Penta TAD734GE Group 0-08, 20-26,32-37 Workshop Manual_311644482 – PDF DOWNLOAD

Content
General Information
00-0 General ……………………………………………………………………………………. 2
Specifications
03-2 Specifications, Engine ……………………………………………………………… 6
Saftety and Other Instructions
05-1 Safety Instructions …………………………………………………………………. 16
Special Tools
08-1 Universal Tools ………………………………………………………………………. 20
08-2 Special Service Tools …………………………………………………………….. 22
General
20-0 Engine Information, General……………………………………………………. 25
Engine
21-0 Engine Complete, General ……………………………………………………… 61
21-1 Cylinder Head ……………………………………………………………………….. 112
21-4 Valve Mechanism …………………………………………………………………. 133
21-6 Crank Mechanism …………………………………………………………………. 137
Lubricating and Oil System
22-0 Lubricating and Oil System, General ………………………………………155
22-2 Oil Filter ………………………………………………………………………………..156
Fuel System
23-0 Fuel System, General ……………………………………………………………. 168
23-3 Fuel Feed Pump and Filter ……………………………………………………. 170
23-7 Injectors and Delivery Pipes …………………………………………………. 181
23-8 Control System … ………………………………………………………………… 193
Inlet and Exhaust System
25-1 Inlet and Exhaust Manifolds …………………………………………………. 195
25-5 Turbocharger ……………………………………………………………………….. 201
25-6 Air Cleaner and Throttle Housing ………………………………………….. 206
Cooling System
26-1 Radiator, Heat Exchanger ……………………………………………………… 213
26-2 Coolant Pump, Thermostat ……………………………………………………. 221
Alternator, Charge Regulator
32-1 Alternator ……………………………………………………………………………… 234
Starting System
33-1 Starter Motor ………………………………………………………………………… 238
Cables and Fuses
37-0 Wiring Diagram …………………………………………………………………….. 240
Alphabetical Index ……………………………………………………………………….. 241
References to Service Bulletins ……………………………………………………. 243

IMAGES PREVIEW OF THE MANUAL: